Fault estimation and fault-tolerant control for discrete-time dynamic systems

In this paper, a novel discrete-time estimator is proposed, which is employed for simultaneous estimation of system states, and actuator/sensor faults in a discrete-time dynamic system. The existence of the discrete-time simultaneous estimator is proven mathematically. The systematic design procedure for the derivative and proportional observer gains is addressed, enabling the estimation error dynamics to be internally proper and stable, and robust against the effects from the process disturbances, measurement noise, and faults. Based on the estimated fault signals and system states, a discrete-time fault-tolerant design approach is addressed, by which the system may recover the system performance when actuator/sensor faults occur. Finally, the proposed integrated discrete-time fault estimation and fault-tolerant control technique is applied to the vehicle lateral dynamics, which demonstrates the effectiveness of the developed techniques

A Markovian jump system approach for the estimation and adaptive diagnosis of decreased power generation in wind farms

In this study, a Markovian jump model of the power generation system of a wind turbine is proposed and the authors present a closed-loop model-based observer to estimate the faults related to energy losses. The observer is designed through an H∞-based optimisation problem that optimally fixes the trade-off between the observer fault sensitivity and robustness. The fault estimates are then used in data-based decision mechanisms for achieving fault detection and isolation. The performance of the strategy is then ameliorated in a wind farm (WF) level scheme that uses a bank of the aforementioned observers and decision mechanisms. Finally, the proposed approach is tested using a well-known benchmark in the context of WF fault diagnosis

Intelligent fault management for the Space Station active thermal control system

The Thermal Advanced Automation Project (TAAP) approach and architecture is described for automating the Space Station Freedom (SSF) Active Thermal Control System (ATCS). The baseline functionally and advanced automation techniques for Fault Detection, Isolation, and Recovery (FDIR) will be compared and contrasted. Advanced automation techniques such as rule-based systems and model-based reasoning should be utilized to efficiently control, monitor, and diagnose this extremely complex physical system. TAAP is developing advanced FDIR software for use on the SSF thermal control system. The goal of TAAP is to join Knowledge-Based System (KBS) technology, using a combination of rules and model-based reasoning, with conventional monitoring and control software in order to maximize autonomy of the ATCS. TAAP's predecessor was NASA's Thermal Expert System (TEXSYS) project which was the first large real-time expert system to use both extensive rules and model-based reasoning to control and perform FDIR on a large, complex physical system. TEXSYS showed that a method is needed for safely and inexpensively testing all possible faults of the ATCS, particularly those potentially damaging to the hardware, in order to develop a fully capable FDIR system. TAAP therefore includes the development of a high-fidelity simulation of the thermal control system. The simulation provides realistic, dynamic ATCS behavior and fault insertion capability for software testing without hardware related risks or expense. In addition, thermal engineers will gain greater confidence in the KBS FDIR software than was possible prior to this kind of simulation testing. The TAAP KBS will initially be a ground-based extension of the baseline ATCS monitoring and control software and could be migrated on-board as additional computation resources are made available

Inverse Simulation as a Tool for Fault Detection and Isolation in Planetary Rovers

With manned expeditions to planetary bodies beyond our own and the Moon currently intractable, the onus falls upon robotic systems to explore and analyse extraterrestrial environments such as Mars. These systems typically take the form of wheeled rovers, designed to navigate the difficult terrain of other worlds. Rovers have been used in this role since Lunokhod 1 landed on the Moon in 1970. While early rovers were remote controlled, communication latency with bodies beyond the Moon and the desire to improve mission effectiveness have resulted in increasing autonomy in planetary rovers. With an increase in autonomy, however, comes an increase in complexity. This can have a negative impact on the reliability of the rover system. With a fault-free system an unlikely prospect and human assistance millions of miles away, the rover must have a robust fault detection, isolation and recovery (FDIR) system. The need for comprehensive FDIR is demonstrated by the recent Chinese lunar rover, Yutu (or “Jade Rabbit”). Yutu was rendered immobile 42 days after landing and remained so for the duration of its operational life: 31 months. While its lifespan far exceeded its expected value, Yutu's inability to move severely impaired its ability to perform its mission. This clearly highlights the need for robust FDIR. A common approach to FDIR is through the generation and analysis of residuals. Output residuals may be obtained by comparing the outputs of the system with predictions of those outputs, obtained from a mathematical model of the system which is supplied with the system inputs. Output residuals allow simple detection and isolation of faults at the output of the system. Faults in earlier stages of the system, however, propagate through the system dynamics and can disperse amongst several of the outputs. This problem is exemplified by faults at the input, which can potentially excite every system state and thus manifest in every output residual. Methods exist for decoupling and analysing output residuals such that input faults may be isolated, however, these methods are complex and require comprehensive development and testing. A conceptually simpler approach is presented in this paper. Inverse simulation (InvSim) is a numerical method by which the inputs of a system are obtained for a desired output. It does so by using a Newton-Raphson algorithm to solve a non-linear model of the system for the input. When supplied with the outputs of a fault-afflicted system, InvSim produces the input required to drive a fault-free system to this output. The fault therefore manifests itself in this generated input signal. The InvSim-generated input may then be compared to the true system input to generate input residuals. Just as a fault at an output manifests itself in the residual for that output alone, a fault at an input similarly manifests itself only in the residual for that input. InvSim may also be used to generate residuals at other locations in the system, by considering distinct subsystems with their own inputs and outputs. This ability is tested comprehensively in this paper. Faults are applied to a simulated rover at a variety of locations within the system structure and residuals generated using both InvSim and conventional forward simulation. Residuals generated using InvSim are shown to facilitate detection and isolation of faults in several locations using simple analyses. By contrast, forward simulation requires the use of complex analytical methods such as structured residuals or adaptive thresholds

State-of-the-art on research and applications of machine learning in the building life cycle

Fueled by big data, powerful and affordable computing resources, and advanced algorithms, machine learning has been explored and applied to buildings research for the past decades and has demonstrated its potential to enhance building performance. This study systematically surveyed how machine learning has been applied at different stages of building life cycle. By conducting a literature search on the Web of Knowledge platform, we found 9579 papers in this field and selected 153 papers for an in-depth review. The number of published papers is increasing year by year, with a focus on building design, operation, and control. However, no study was found using machine learning in building commissioning. There are successful pilot studies on fault detection and diagnosis of HVAC equipment and systems, load prediction, energy baseline estimate, load shape clustering, occupancy prediction, and learning occupant behaviors and energy use patterns. None of the existing studies were adopted broadly by the building industry, due to common challenges including (1) lack of large scale labeled data to train and validate the model, (2) lack of model transferability, which limits a model trained with one data-rich building to be used in another building with limited data, (3) lack of strong justification of costs and benefits of deploying machine learning, and (4) the performance might not be reliable and robust for the stated goals, as the method might work for some buildings but could not be generalized to others. Findings from the study can inform future machine learning research to improve occupant comfort, energy efficiency, demand flexibility, and resilience of buildings, as well as to inspire young researchers in the field to explore multidisciplinary approaches that integrate building science, computing science, data science, and social science

A Fault Tolerant System for an Integrated Avionics Sensor Configuration

An aircraft sensor fault tolerant system methodology for the Transport Systems Research Vehicle in a Microwave Landing System (MLS) environment is described. The fault tolerant system provides reliable estimates in the presence of possible failures both in ground-based navigation aids, and in on-board flight control and inertial sensors. Sensor failures are identified by utilizing the analytic relationships between the various sensors arising from the aircraft point mass equations of motion. The estimation and failure detection performance of the software implementation (called FINDS) of the developed system was analyzed on a nonlinear digital simulation of the research aircraft. Simulation results showing the detection performance of FINDS, using a dual redundant sensor compliment, are presented for bias, hardover, null, ramp, increased noise and scale factor failures. In general, the results show that FINDS can distinguish between normal operating sensor errors and failures while providing an excellent detection speed for bias failures in the MLS, indicated airspeed, attitude and radar altimeter sensors