Exploring the Synergy: A Review of Dual-Functional Radar Communication Systems

This review paper examines the concept and advancements in the evolving landscape of Dual-functional Radar Communication (DFRC) systems. Traditionally, radar and communication systems have functioned independently, but current research is actively investigating the integration of these functionalities into a unified platform. This paper discusses the motivations behind the development of DFRC systems, the challenges involved, and the potential benefits they offer. A discussion on the performance bounds for DFRC systems is also presented. The paper encompasses a comprehensive analysis of various techniques, architectures, and technologies used in the design and optimization of DFRC systems, along with their performance and trade-offs. Additionally, we explore potential application scenarios for these joint communication and sensing systems, offering a comprehensive perspective on the multifaceted landscape of DFRC technology.Comment: 17 pages, 7 figure

Waveform Analysis and Optimization for Radar Coincidence Imaging with Modeling Error

RCI is a novel superresolution staring imaging technique based on the idea of wavefront modulation and temporal-spatial stochastic radiation field. For RCI, the reference matrix should be known accurately, and the imaging performance depends on the incoherence property of the reference matrix. Unfortunately, the modeling error, which degrades the performance significantly, exists generally. In this paper, RCI using frequency-hopping waveforms (FH-RCI) is considered, and a FH code design method aiming to increase the robustness of RCI to modeling error is proposed. First, we derive the upper bound of imaging error for RCI with modeling error and conclude that the condition number of the reference matrix determines the imaging performance. Then the object function for waveform design which minimizes the condition number of the reference matrix is achieved, and the quantum simulated annealing (QSA) is employed to optimize the FH code. Numerical simulations show that the optimized FH code could decrease the condition number of the reference matrix and improve the imaging performance of RCI with modeling error

Target localization in passive and active systems : performance bonds

The main goal of this dissertation is to improve the understanding and to develop ways to predict the performance of localization techniques as a function of signal-to-noise ratio (SNR) and of system parameters. To this end, lower bounds on the maximum likelihood estimator (MLE) performance are studied. The Cramer-Rao lower bound (CRLB) for coherent passive localization of a near-field source is derived. It is shown through the Cramer-Rao bound that, the coherent localization systems can provide high accuracies in localization, to the order of carrier frequency of the observed signal. High accuracies come to a price of having a highly multimodal estimation metric which can lead to sidelobes competing with the mainlobe and engendering ambiguity in the selection of the correct peak. The effect of the sidelobes over the estimator performance at different SNR levels is analyzed and predicted with the use of Ziv-Zakai lower bound (ZZB). Through simulations it is shown that ZZB is tight to the MLEs performance over the whole SNR range. Moreover, the ZZB is a convenient tool to assess the coherent localization performance as a function of various system parameters. The ZZB was also used to derive a lower bound on the MSE of estimating the range and the range rate of a target in active systems. From the expression of the derived lower bound it was noted that, the ZZB is determined by SNR and by the ambiguity function (AF). Thus, the ZZB can serve as an alternative to the ambiguity function (AF) as a tool for radar design. Furthermore, the derivation is extended to the problem of estimating target’s location and velocity in a distributed multiple input multiple output (MIMO) radar system. The derived bound is determined by SNR, by the product between the number of transmitting antennas and the number of receiving antennas from the radar system, and by all the ambiguity functions and the cross-ambiguity functions corresponding to all pairs transmitter-target-receiver. Similar to the coherent localization, the ZZB can be applied to study the performance of the estimator as a function of different system parameters. Comparison between the ZZB and the MSE of the MLE obtained through simulations demonstrate that the bound is tight in all SNR regions

Multidimensional Frequency Estimation with Applications in Automotive Radar

This thesis considers multidimensional frequency estimation with a focus on computational efficiency and high-resolution capability. A novel framework on multidimensional high-resolution frequency estimation is developed and applied to increase the range, radial velocity, and angular resolution capcability of state-of-the-art automotive radars

Frequency diversity array: theory and design

This thesis presents a novel concept of beam scanning and forming by employing frequency diversity in an array antenna. It is shown that by applying a linear frequency shift to the CW signals across the elements, a periodically scanning beam pattern is generated and the main beam direction is a function of time and range. Moreover, when transmitting a pulse signal, the frequency diversity array (FDA) can be used for beam forming in radar applications. These properties offer a more flexible beam scanning and forming option over traditional phase shifter implementations. The thesis begins with the discussion on FDA’s array factor. It is mathematically proven that the array factor is a periodic function of time and range and the scanning period itself is a function of the linear frequency shift. Then further discussion is made when a pulsed signal is transmitted by an FDA. The requirement on the pulse width for a certain linear frequency shift is specified and corresponding signal processing technique is provided for the frequency diverse signal receiver. The thesis subsequently goes on to an electromagnetic simulation of FDA. The CST Microwave Studio is utilized to model the FDA and simulate its transient field, which allows one to verify the relationship between the scanning period and the linear frequency shift. Finally, the implementation of FDA is considered with the focus laid on the generation of the required frequency diverse signals complying with the two basic assumptions. The PLL frequency synthesis technique is introduced as an effective approach of generating the frequency diverse signals. One low cost and profile design of integer-N frequency synthesizer is presented to illustrate the basic design considerations and guidelines. For comparison, a Σ − Δ fractional-N frequency synthesizer produced by Analog Device is introduced for designs where more budget is available

Performance evaluation and waveform design for MIMO radar

Multiple-input multiple-output (MIMO) radar has been receiving increasing attention in recent years due to the dramatic advantages offered by MIMO systems in communications. The amount of energy reflected from a common radar target varies considerably with the observation angle, and these scintillations may cause signal fading which severely degrades the performance of conventional radars. MIMO radar with widely spaced antennas is able to view several aspects of a target simultaneously, which realizes a spatial diversity gain to overcome the target scintillation problem, leading to significantly enhanced system performance. Building on the initial studies presented in the literature, MIMO radar is investigated in detail in this thesis. First of all, a finite scatterers model is proposed, based on which the target detection performance of a MIMO radar system with arbitrary array-target configurations is evaluated and analyzed. A MIMO radar involving a realistic target is also set up, whose simulation results corroborate the conclusions drawn based on theoretical target models, validating in a practical setting the improvements in detection performance brought in by the MIMO radar configuration. Next, a hybrid bistatic radar is introduced, which combines the phased-array and MIMO radar configurations to take advantage of both coherent processing gain and spatial diversity gain simultaneously. The target detection performance is first assessed, followed by the evaluation of the direction finding performance, i.e., performance of estimating angle of arrival as well as angel of departure. The presented theoretical expressions can be used to select the best architecture for a radar system, particularly when the total number of antennas is fixed. Finally, a novel two phase radar scheme involving signal retransmission is studied. It is based on the time-reversal (TR) detection and is investigated to improve the detection performance of a wideband MIMO radar or sonar system. Three detectors demanding various amounts of a priori information are developed, whose performance is evaluated and compared. Three schemes are proposed to design the retransmitted waveform with constraints on the transmitted signal power, further enhancing the detection performance with respect to the TR approach

Ultra-Wideband CMOS Transceiver Front-End for Bio-Medical Radar Sensing

Since the Federal Communication Commission released the unlicensed 3.1-10.6 GHz frequency band for commercial use in early 2002, the ultra wideband (UWB) has developed from an emerging technology into a mainstream research area. The UWB technology, which utilizes wide spectrum, opens a new era of possibility for practical applications in radar sensing, one of which is the human vital sign monitoring. The aim of this thesis is to study and research the possibility of a new generation humanrespiration monitoring sensor using UWB radar technology and to develop a new prototype of UWB radar sensor for system-on-chip solutions in CMOS technology. In this thesis, a lowpower Gaussian impulse UWB mono-static radar transceiver architecture is presented. The UWB Gaussian pulse transmitter and receiver are implemented and fabricated using 90nm CMOS technology. Since the energy of low order Gaussian pulse is mostly condensed at lower frequency, in order to transmit the pulse in a very efficient way, higher order Gaussian derivative pulses are desired as the baseband signal. This motivates the advancement of the design into UWB high-order pulse transmitter. Both the Gaussian impulse UWB transmitter and Gaussian higher-order impulse UWB transmitter take the low-power and high-speed advantage of digital circuit to generate different waveforms. The measurement results are analyzed and discussed. This thesis also presents a low-power UWB mono-static radar transceiver architecture exploiting the full benefit of UWB bandwidth in radar sensing applications. The transceiver includes a full UWB band transmitter, an UWB receiver front-end, and an on-chip diplexer. The non-coherent UWB transmitter generates pulse modulated baseband signals at different carrier frequencies within the designated 3-10 GHz band using a digitally controlled pulse generator. The test shows the proposed radar transceiver can detect the human respiration pattern within 50 cm distance. The applications of this UWB radar sensing solution in commercialized standard CMOS technology include constant breathing pattern monitoring for gated radiation therapy, realtime monitoring of patients, and any other breathing monitoring. The research paves the way to wireless technology integration with health care and bio-sensor network

Theory and Applications of Aperiodic (Random) Phased Arrays

A need for network centric topologies using mobile wireless communications makes it important to investigate new distributed beamforming techniques. Platforms such as micro air vehicles (MAVs), unattended ground sensors (UGSs), and unpiloted aerial vehicles (UAVs) can all benefit from advances in this area utilizing advantages in stealth, enhanced survivability and maximum maneuverability. Moreover, in this dissertation, electromagnetic radiation is investigated such that the signal power of each element is coherently added in the far-field region of a specified target direction with net destructive interference occurring in all other regions to suppress sidelobe behavior. This provides superior range and resolution characteristics for a variety of applications including; early warning radar, ballistic missile defense and search and rescue efforts. A wide variety of topologies can be used to confine geometrically these mobile random arrays for analysis. The distribution function for these topologies must be able to generalize the randomness within the geometry. By this means it is feasible to assume the random element distribution of a very large volumetric space will yield either a normal or Gaussian distribution. Therefore the underlying assumption stands that the statistically averaged beam pattern develops from an arrangement of uniformly or Gaussian distrusted elements; both confined to a variety of geometry of radius A and is further generalized using a simple theory based upon the Fourier Transform. Hence, this theory will be derived and serve as the foundation for advanced performance characteristics of these arrays such as its ability for sidelobe tapering, adaptive nulling and multi beam control. In addition it will be shown that for the most ideal of conditions a steerable beam pattern free of sidelobe behavior (better known as a Gaussian distribution) is quite possible. As well these random array structures will be shown to provide superior bandwidth capability over tradiational array structures since they are frequency independent. Last of all a summary of the random array analysis and its results concludes this dissertation

Metamaterial

In-depth analysis of the theory, properties and description of the most potential technological applications of metamaterials for the realization of novel devices such as subwavelength lenses, invisibility cloaks, dipole and reflector antennas, high frequency telecommunications, new designs of bandpass filters, absorbers and concentrators of EM waves etc. In order to create a new devices it is necessary to know the main electrodynamical characteristics of metamaterial structures on the basis of which the device is supposed to be created. The electromagnetic wave scattering surfaces built with metamaterials are primarily based on the ability of metamaterials to control the surrounded electromagnetic fields by varying their permeability and permittivity characteristics. The book covers some solutions for microwave wavelength scales as well as exploitation of nanoscale EM wavelength such as visible specter using recent advances of nanotechnology, for instance in the field of nanowires, nanopolymers, carbon nanotubes and graphene. Metamaterial is suitable for scholars from extremely large scientific domain and therefore given to engineers, scientists, graduates and other interested professionals from photonics to nanoscience and from material science to antenna engineering as a comprehensive reference on this artificial materials of tomorrow