265 research outputs found
Trojans in Early Design Steps—An Emerging Threat
Hardware Trojans inserted by malicious foundries
during integrated circuit manufacturing have received substantial
attention in recent years. In this paper, we focus on a different
type of hardware Trojan threats: attacks in the early steps of
design process. We show that third-party intellectual property
cores and CAD tools constitute realistic attack surfaces and that
even system specification can be targeted by adversaries. We
discuss the devastating damage potential of such attacks, the
applicable countermeasures against them and their deficiencies
Ingress of threshold voltage-triggered hardware trojan in the modern FPGA fabric–detection methodology and mitigation
The ageing phenomenon of negative bias temperature instability (NBTI) continues to challenge the dynamic thermal management of modern FPGAs. Increased transistor density leads to thermal accumulation and propagates higher and non-uniform temperature variations across the FPGA. This aggravates the impact of NBTI on key PMOS transistor parameters such as threshold voltage and drain current. Where it ages the transistors, with a successive reduction in FPGA lifetime and reliability, it also challenges its security. The ingress of threshold voltage-triggered hardware Trojan, a stealthy and malicious electronic circuit, in the modern FPGA, is one such potential threat that could exploit NBTI and severely affect its performance. The development of an effective and efficient countermeasure against it is, therefore, highly critical. Accordingly, we present a comprehensive FPGA security scheme, comprising novel elements of hardware Trojan infection, detection, and mitigation, to protect FPGA applications against the hardware Trojan. Built around the threat model of a naval warship’s integrated self-protection system (ISPS), we propose a threshold voltage-triggered hardware Trojan that operates in a threshold voltage region of 0.45V to 0.998V, consuming ultra-low power (10.5nW), and remaining stealthy with an area overhead as low as 1.5% for a 28 nm technology node. The hardware Trojan detection sub-scheme provides a unique lightweight threshold voltage-aware sensor with a detection sensitivity of 0.251mV/nA. With fixed and dynamic ring oscillator-based sensor segments, the precise measurement of frequency and delay variations in response to shifts in the threshold voltage of a PMOS transistor is also proposed. Finally, the FPGA security scheme is reinforced with an online transistor dynamic scaling (OTDS) to mitigate the impact of hardware Trojan through run-time tolerant circuitry capable of identifying critical gates with worst-case drain current degradation
Creation and detection of hardware trojans using non-invasive off-the-shelf technologies
As a result of the globalisation of the semiconductor design and fabrication processes, integrated circuits are becoming increasingly vulnerable to malicious attacks. The most concerning threats are hardware trojans. A hardware trojan is a malicious inclusion or alteration to the existing design of an integrated circuit, with the possible effects ranging from leakage of sensitive information to the complete destruction of the integrated circuit itself. While the majority of existing detection schemes focus on test-time, they all require expensive methodologies to detect hardware trojans. Off-the-shelf approaches have often been overlooked due to limited hardware resources and detection accuracy. With the advances in technologies and the democratisation of open-source hardware, however, these tools enable the detection of hardware trojans at reduced costs during or after production. In this manuscript, a hardware trojan is created and emulated on a consumer FPGA board. The experiments to detect the trojan in a dormant and active state are made using off-the-shelf technologies taking advantage of different techniques such as Power Analysis Reports, Side Channel Analysis and Thermal Measurements. Furthermore, multiple attempts to detect the trojan are demonstrated and benchmarked. Our simulations result in a state-of-the-art methodology to accurately detect the trojan in both dormant and active states using off-the-shelf hardware
Recommended from our members
Stealthy parametric hardware Trojans in VLSI Circuits
Over the last decade, hardware Trojans have gained increasing attention in academia, industry and by government agencies. In order to design reliable countermeasures, it is crucial to understand how hardware Trojans can be built in practice. This is an area that has received relatively scant treatment in the literature. In this thesis, we examine how particularly stealthy parametric Trojans can be introduced to VLSI circuits. Parametric Trojans do not require any additional logic and are purely based on subtle manipulations on the sub-transistor level to modify the parameters of few transistors which makes them very hard to detect.
We introduce a design methodology to insert stealthy parametric hardware Trojans which are based on injecting extremely rare path delay faults into the netlist of the target circuit. As a case study, we apply our method to a 32-bit multiplier circuit resulting in a stealthy Trojan multiplier that computes faulty outputs for specific combinations of input pairs that are applied to the circuit. The multiplier can be used to realize bug attacks, introduced by Biham et al. in 2008. We also extend this concept and show how it can be used to attack ECDH key agreement protocols. Our method is a versatile tool for designing stealthy Trojans for a given circuit and is not restricted to multipliers and the bug attack.
In this thesis we also examine how a stealthy side-channel hardware Trojan can be inserted in a provably-secure side-channel analysis protected implementation. Once the Trojan is triggered, the malicious design exhibits exploitable side-channel leakage leading to successful key recovery attacks. The underlying concept is based on a secure masked hardware implementation which does not exhibit any detectable leakage. However, by running the device at a particular clock frequency one of the requirements of the underlying masking scheme is not fulfilled anymore, and the device\u27s side-channel leakage can be exploited. We apply our technique to a Threshold Implementation of the PRESENT block cipher realized in both FPGA and ASIC. We show that triggering the Trojan makes both FPGA and ASIC prototypes vulnerable to certain SCA attacks.
True random number generators (TRNGs) are an essential component of cryptographic designs, which are used to generate private keys for encryption and authentication, and are used in masking countermeasures. This thesis also presents a mechanism to design a stealthy parametric hardware Trojan for ring oscillator-based TRNGs. When the Trojan is triggered by operation at a specific high temperature the malicious TRNG generates predictable non-random outputs, yet under normal operating conditions it works correctly. Also we elaborate a stochastic model based on Markov Chains by which the attacker can use their knowledge of the Trojan to predict the TRNG outputs
- …