Recent Advances and Future Trends in Pavement Engineering

This Special Issue “Recent Advances and Future Trends in Pavement Engineering” was proposed and organized to present recent developments in the field of innovative pavement materials and engineering. The 12 articles and state-of-the-art reviews highlighted in this editorial are related to different aspects of pavement engineering, from recycled asphalt pavements to alkali-activated materials, from hot mix asphalt concrete to porous asphalt concrete, from interface bonding to modal analysis, and from destructive testing to non-destructive pavement monitoring by using fiber optics sensors. This Special Issue partly provides an overview of current innovative pavement engineering ideas that have the potential to be implemented in industry in the future, covering some recent developments

Polymer Processing and Surfaces

This book focuses on fundamental and applied research on polymer processing and its effect on the final surface as the optimization of polymer surface properties results in the unique applicability of these over other materials. The development and testing of the next generation of polymeric and composite materials is of particular interest. Special attention is given to polymer surface modification, external stimuli-responsive surfaces, coatings, adhesion, polymer and composites fatigue analysis, evaluation of the surface quality and microhardness, processing parameter optimization, characterization techniques, among others

Optimization of the processing of bio based polymer sustainable products

Polylactic Acid (PLA) is processed by injection moulding technology. The main aim of this study is to provide guidelines for mould and part design, namely to cope with the shrinkage effect and the ejection forces related to the use of bio based polymers. Furthermore optimization of the overall process will be investigated as well as the influence of different parameters to the process and product properties. Draft angle, mould temperature and holding pressure will be related to the ejection forces and the level of shrinkage that occurs

A feature-based approach to the Computer-Aided Design of sculptured products

Computer-Aided Design systems offer considerable potential for improving design process efficiency. To reduce the 'ease of use' barrier hindering full realisation of this potential amongst general mechanical engineering industries, many commercial systems are adopting a Feature-Based Design (FBD) metaphor. Typically the user is allowed to define and manipulate the design model using interface elements that introduce and control parametric geometry clusters, with engineering meaning, representing specific product features (such as threaded holes, slots, pockets and bosses). Sculptured products, such as golf club heads, shoe lasts, crockery and sanitary ware, are poorly supported by current FBD systems and previous research, because their complex shapes cannot be accurately defined using the geometrically primitive feature sets implemented. Where sculptured surface regions are allowed for, the system interface, data model and functionality are little different from that already provided in many commercial surface modelling systems, and so offer very little improvement in ease of use, quality or efficiency. This thesis presents research to propose and develop an FBD methodology and system suitable for sculptured products. [Continues.

Fabrication of sulfonated polyethersulfone ultrafiltration membranes with an excellent antifouling performance by impregnating with polysulfopropyl acrylate coated ZnO nanoparticles

Sulfonated polyethersulfone/sulfopropyl methacrylate membranes impregnated with the polysulfopropyl acrylate coated ZnO nanoparticles were developed using a non-solvent-induced phase separation recipe. The composite membranes offered much-enhanced hydrophilicity and improved porosity, which are critical for the excellent antifouling performance and high permeate flux. By adding polysulfopropyl acrylate modified ZnO, it achieved the maximum water flux of 420 Lm−2h−1 while maintained the natural organic matter rejection rate of 99% with an excellent flux recovery ratio up to 99% in the antifouling measurement. The results display that the impregnation of ZnO nanoparticles in the sulfonated polyethersulfone membrane can effectively increase the surface hydrophilicity which is essential for reducing the irreversible fouling with improved long-term performance and excellent recyclability

Implementation of hierarchical design for manufacture rules in manufacturing processes

In order to shorten the product development cycle time, minimise overall cost and smooth transition into production, early consideration of manufacturing processes is important. Design for Manufacture (DFM) is the practice of designing products with manufacturing issues using an intelligent system, which translates 3D solid models into manufacturable features. Many existing and potential applications, particularly in the field of manufacturing, require various aspects of features technology. In all engineering fields geometric modelling wluch accurately represents the shape of a whole engineering component has become accepted for a wide range of applications. To apply DFM rules or guidelines in manufacturing processes, they have to be systematised and organised into a hierarchical rule system. Rules at the higher level of the hierarchical system are applied to more generic manufacturing features, and specific rules are applied to more detailed features. This enables the number of rules and amount of repetition to be minimsed. Violation of the design for manufacture rules in the features, their characteristics and manufacturing capabilities are further examined in this hierarchical system. Manufacturabillty analysis, such as production type, materials, tolerances, surface finish, feature characteristics and accessibility, are also taken into consideration. Consideration of process capabilities and limitations during the design process is necessary in order to minimise production time and as a result, rnanufactunng cost. The correct selection of manufacturing processes is also important as it is related to the overal cost. As a result of this research, a hierarchical design for manufacture rule system is proposed which would aid designers in avoiding designs that would lead to costly manufacturing processes

Detached eddy simulation of unsteady turbulent flows in the draft tube of a bulb turbine

Les aspirateurs de turbines hydrauliques jouent un rôle crucial dans l’extraction de l’énergie disponible. Dans ce projet, les écoulements dans l’aspirateur d’une turbine de basse chute ont été simulés à l'aide de différents modèles de turbulence dont le modèle DDES, un hybride LES/RANS, qui permet de résoudre une partie du spectre turbulent. Déterminer des conditions aux limites pour ce modèle à l’entrée de l’aspirateur est un défi. Des profils d’entrée 1D axisymétriques et 2D instationnaires tenant compte des sillages et vortex induits par les aubes de la roue ont notamment été testés. Une fluctuation artificielle a également été imposée, afin d’imiter la turbulence qui existe juste après la roue. Les simulations ont été effectuées pour deux configurations d’aspirateur du projet BulbT. Pour la deuxième, plusieurs comparaisons avec des données expérimentales ont été faites pour deux conditions d'opération, à charge partielle et dans la zone de baisse rapide du rendement après le point de meilleur rendement. Cela a permis d’évaluer l'efficacité et les lacunes de la modélisation turbulente et des conditions limites à travers leurs effets sur les quantités globales et locales. Les résultats ont montrés que les structures tourbillonnaires et sillages sortant de la roue sont adéquatement résolus par les simulations DDES de l’aspirateur, en appliquant les profils instationnaires bidimensionnels et un schéma de faible dissipation pour le terme convectif. En outre, les effets de la turbulence artificielle à l'entrée de l’aspirateur ont été explorés à l'aide de l’estimation de l’intermittence du décollement, de corrélations en deux points, du spectre d'énergie et du concept de structures cohérentes lagrangiennes. Ces analyses ont montré que les détails de la dynamique de l'écoulement et de la séparation sont modifiés, ainsi que les patrons des lignes de transport à divers endroits de l’aspirateur. Cependant, les quantités globales comme le coefficient de récupération de l’aspirateur ne sont pas influencées par ces spécificités locales.Draft tubes play a crucial role in elevating the available energy extraction of hydroturbines. In this project, turbulent flows in the draft tube of a low-head bulb turbine were simulated using, among others, an advance hybrid LES/RANS turbulent model, called DDES, which can resolve portions of the turbulent spectrum. Providing appropriate inflow boundary conditions for such models is a challenging issue. In this regard, different inflow boundary conditions were tested, including axisymmetric 1D profiles, and unsteady 2D inflow profiles that take runner blade wakes and vortices into account. Artificial fluctuation at the inlet section of the draft tube was also included to mimic the turbulence existing after the runner. Simulations were conducted for two draft tube configurations of the BulbT project. For one of them, intensive comparisons with experimental data were done for two operating conditions, one at part load and another in the sharp drop-off portion of the efficiency hill after the best efficiency point. This allowed to assess the effectiveness and shortcomings of the adopted turbulence modeling and boundary conditions through their effects on the global and local quantities. The results showed that the runner-related vortical structures and wakes are appropriately resolved using stand-alone DDES simulation of the draft tube flows. This is achieved by applying unsteady 2D inflow profiles along with adopting low dissipation scheme for the convective term. Furthermore, the effects of applying artificial turbulence at inlet were explored using separation intermittency, two-point correlation, energy spectrum and Lagrangian coherent structure concepts. These analyses revealed that the type of inflow boundary conditions modifies the details of the flow and separation dynamics as well as patterns of the transport barriers in different regions of the draft tube. However, the global quantities such as recovery coefficient are not influenced by these local features

Carbon-Based Materials

New carbon materials with improved mechanical, electrical, chemical, and optical properties are predicted and considered to be very promising for practical application. Carbon-based materials in the form of films, fabrics, aerogels, or microstructural materials are known for their large surface areas and pore volumes, light weight, and a great variety of structural morphology. Such unique structures can then be employed for a variety of purposes, for example, the production of new electronic devices, energy storage, and the fabrication of new materials. Nowadays, clear understanding of carbon materials via several examples of synthesis/processing methodologies and properties characterization is required. This Special Issue, “Carbon-Based Materials”, addresses the current state regarding the production and investigation of carbon-based materials. It consists of 13 peer-reviewed papers that cover both theoretical and experimental works in a wide a range of subjects on carbon structures

Extraction of generative processes from B-Rep shapes and application to idealization transformations

International audienceA construction tree is a set of shape generation processes commonly produced with CAD modelers during a design process of B-Rep objects. However, a construction tree does not bring all the desired properties in many configurations: dimension modifications, idealization processes, etc. Generating a non trivial set of generative processes, possibly forming a construction graph, can significantly improve the adequacy of some of these generative processes to meet user's application needs. This paper proposes to extract generative processes from a given B-rep shape as a high-level shape description. To evaluate the usefulness of this description, finite element analyses (FEA) and particularly idealizations are the applications selected to evaluate the adequacy of additive generative processes. Non trivial construction trees containing generic extrusion and revolution primitives behave like well established CSG trees. Advantageously, the proposed approach is primitive-based, which ensures that any generative process of the construction graph does preserve the realizability of the corresponding volume. In the context of FEA, connections between idealized primitives of a construction graph can be efficiently performed using their interfaces. Consequently, generative processes of a construction graph become a high-level object structure that can be tailored to idealizations of primitives and robust connections between them