3,093 research outputs found
Biomimetic Manipulator Control Design for Bimanual Tasks in the Natural Environment
As robots become more prolific in the human environment, it is important that safe operational
procedures are introduced at the same time; typical robot control methods are
often very stiff to maintain good positional tracking, but this makes contact (purposeful
or accidental) with the robot dangerous. In addition, if robots are to work cooperatively
with humans, natural interaction between agents will make tasks easier to perform with
less effort and learning time. Stability of the robot is particularly important in this
situation, especially as outside forces are likely to affect the manipulator when in a close
working environment; for example, a user leaning on the arm, or task-related disturbance
at the end-effector.
Recent research has discovered the mechanisms of how humans adapt the applied force
and impedance during tasks. Studies have been performed to apply this adaptation to
robots, with promising results showing an improvement in tracking and effort reduction
over other adaptive methods. The basic algorithm is straightforward to implement,
and allows the robot to be compliant most of the time and only stiff when required by
the task. This allows the robot to work in an environment close to humans, but also
suggests that it could create a natural work interaction with a human. In addition, no
force sensor is needed, which means the algorithm can be implemented on almost any
robot.
This work develops a stable control method for bimanual robot tasks, which could also
be applied to robot-human interactive tasks. A dynamic model of the Baxter robot is
created and verified, which is then used for controller simulations. The biomimetic control
algorithm forms the basis of the controller, which is developed into a hybrid control
system to improve both task-space and joint-space control when the manipulator is disturbed
in the natural environment. Fuzzy systems are implemented to remove the need
for repetitive and time consuming parameter tuning, and also allows the controller to
actively improve performance during the task. Experimental simulations are performed,
and demonstrate how the hybrid task/joint-space controller performs better than either
of the component parts under the same conditions. The fuzzy tuning method is then applied
to the hybrid controller, which is shown to slightly improve performance as well as
automating the gain tuning process. In summary, a novel biomimetic hybrid controller
is presented, with a fuzzy mechanism to avoid the gain tuning process, finalised with a
demonstration of task-suitability in a bimanual-type situation.EPSR
A survey on uninhabited underwater vehicles (UUV)
ASME Early Career Technical Conference, ASME ECTC, October 2-3, 2009, Tuscaloosa, Alabama, USAThis work presents the initiation of our underwater robotics research which will be focused on underwater
vehicle-manipulator systems. Our aim is to build an underwater vehicle with a robotic manipulator which has a robust system and also can compensate itself under the influence of the hydrodynamic effects. In this paper, overview of the existing underwater vehicle systems, thruster designs, their dynamic models and control architectures are given. The purpose and results of the existing methods in underwater robotics are investigated
Computational intelligence approaches to robotics, automation, and control [Volume guest editors]
No abstract available
Classifying intelligence in machines : a taxonomy of intelligent control
The quest to create machines that can solve problems as humans do leads us to intelligent control. This field encompasses control systems that can adapt to changes and learn to improve their actions—traits typically associated with human intelligence. In this work we seek to determine how intelligent these classes of control systems are by quantifying their level of adaptability and learning. First we describe the stages of development towards intelligent control and present a definition based on literature. Based on the key elements of this definition, we propose a novel taxonomy of intelligent control methods, which assesses the extent to which they handle uncertainties in three areas: the environment, the controller, and the goals. This taxonomy is applicable to a variety of robotic and other autonomous systems, which we demonstrate through several examples of intelligent control methods and their classifications. Looking at the spread of classifications based on this taxonomy can help researchers identify where control systems can be made more intelligent
Task-space dynamic control of underwater robots
This thesis is concerned with the control aspects for underwater tasks performed by
marine robots. The mathematical models of an underwater vehicle and an underwater
vehicle with an onboard manipulator are discussed together with their associated
properties.
The task-space regulation problem for an underwater vehicle is addressed where the
desired target is commonly specified as a point. A new control technique is proposed
where the multiple targets are defined as sub-regions. A fuzzy technique is used to
handle these multiple sub-region criteria effectively. Due to the unknown gravitational
and buoyancy forces, an adaptive term is adopted in the proposed controller.
An extension to a region boundary-based control law is then proposed for an underwater
vehicle to illustrate the flexibility of the region reaching concept. In this novel
controller, a desired target is defined as a boundary instead of a point or region. For a
mapping of the uncertain restoring forces, a least-squares estimation algorithm and the
inverse Jacobian matrix are utilised in the adaptive control law.
To realise a new tracking control concept for a kinematically redundant robot, subregion
tracking control schemes with a sub-tasks objective are developed for a UVMS.
In this concept, the desired objective is specified as a moving sub-region instead of a
trajectory. In addition, due to the system being kinematically redundant, the controller
also enables the use of self-motion of the system to perform sub-tasks (drag
minimisation, obstacle avoidance, manipulability and avoidance of mechanical joint
limits)
Industrial Robotics
This book covers a wide range of topics relating to advanced industrial robotics, sensors and automation technologies. Although being highly technical and complex in nature, the papers presented in this book represent some of the latest cutting edge technologies and advancements in industrial robotics technology. This book covers topics such as networking, properties of manipulators, forward and inverse robot arm kinematics, motion path-planning, machine vision and many other practical topics too numerous to list here. The authors and editor of this book wish to inspire people, especially young ones, to get involved with robotic and mechatronic engineering technology and to develop new and exciting practical applications, perhaps using the ideas and concepts presented herein
Intelligent systems in manufacturing: current developments and future prospects
Global competition and rapidly changing customer requirements are demanding increasing changes in manufacturing environments. Enterprises are required to constantly redesign their products and continuously reconfigure their manufacturing systems. Traditional approaches to manufacturing systems do not fully satisfy this new situation. Many authors have proposed that artificial intelligence will bring the flexibility and efficiency needed by manufacturing systems. This paper is a review of artificial intelligence techniques used in manufacturing systems. The paper first defines the components of a simplified intelligent manufacturing systems (IMS), the different Artificial Intelligence (AI) techniques to be considered and then shows how these AI techniques are used for the components of IMS
- …