The Hierarchical Control Method for Coordinating a Group of Connected Vehicles on Urban Roads

Safety, mobility and environmental impact are the three major challenges in today\u27s transportation system. As the advances in wireless communication and vehicle automation technologies, they have rapidly led to the emergence and development of connected and automated vehicles (CAVs). We can expect fully CAVs by 2030. The CAV technologies offer another solution for the issues we are dealing with in the current transportation system. In the meanwhile, urban roads are one of the most important part in the transportation network. Urban roads are characterized by multiple interconnected intersections. They are more complicated than highway traffic, because the vehicles on the urban roads are moving in multiple directions with higher relative velocity. Most of the traffic accidents happened at intersections and the intersections are the major contribution to the traffic congestions. Our urban road infrastructures are also becoming more intelligent. Sensor-embedded roadways are continuously gathering traffic data from passing vehicles. Our smart vehicles are meeting intelligent roads. However, we have not taken the fully advantages of the data rich traffic environment provided by the connected vehicle technologies and intelligent road infrastructures. The objective of this research is to develop a coordination control strategy for a group of connected vehicles under intelligent traffic environment, which can guide the vehicles passing through the intersections and make smart lane change decisions with the objective of improving overall fuel economy and traffic mobility. The coordination control strategy should also be robust to imperfect connectivity conditions with various connected vehicle penetration rate. This dissertation proposes a hierarchical control method to coordinate a group of connected vehicles travelling on urban roads with intersections. The dissertation includes four parts of the application of our proposed method: First, we focus on the coordination of the connected vehicles on the multiple interconnected unsignalized intersection roads, where the traffic signals are removed and the collision avoidance at the intersection area relays on the communication and cooperation of the connected vehicles and intersection controllers. Second, a fuel efficient hierarchical control method is proposed to control the connected vehicles travel on the signalized intersection roads. With the signal phase and timing (SPAT) information, our proposed approach is able to help the connected vehicles minimize red light idling and improve the fuel economy at the same time. Third, the research is extended form single lane to multiple lane, where the connected vehicle discretionary and cooperative mandatory lane change have been explored. Finally, we have analysis the real-world implementation potential of our proposed algorithm including the communication delay and real-time implementation analysis

Impact of Different Desired Velocity Profiles and Controller Gains on Convoy Driveability of Cooperative Adaptive Cruise Control Operated Platoons

As the development of autonomous vehicles rapidly advances, the use of convoying/platooning becomes a more widely explored technology option for saving fuel and increasing the efficiency of traffic. In cooperative adaptive cruise control (CACC), the vehicles in a convoy follow each other under adaptive cruise control (ACC) that is augmented by the sharing of preceding vehicle acceleration through the vehicle to vehicle communication in a feedforward control path. In general, the desired velocity optimization for vehicles in the convoy is based on fuel economy optimization, rather than driveability. This paper is a preliminary study on the impact of the desired velocity profile on the driveability characteristics of a convoy of vehicles and the controller gain impact on the driveability. A simple low-level longitudinal model of the vehicle has been used along with a PD type cruise controller and a generic spacing policy for ACC/CACC. The acceleration of the previous vehicle is available to the next vehicle as input, and the simulations are performed as Cooperative Adaptive Cruise Control of a convoy of vehicles. Individual vehicle acceleration profiles have been analyzed for driveability for two different velocity profiles that are followed in a stretch of 720 m between stop signs. The controller gains have been re-tuned based on the parameter space robust control PID approach for driveability and compared with the original gains. The US06 SFTP drive cycle has also been used for the comparison of the two different controller gain sets

A Learning-based Stochastic MPC Design for Cooperative Adaptive Cruise Control to Handle Interfering Vehicles

Vehicle to Vehicle (V2V) communication has a great potential to improve reaction accuracy of different driver assistance systems in critical driving situations. Cooperative Adaptive Cruise Control (CACC), which is an automated application, provides drivers with extra benefits such as traffic throughput maximization and collision avoidance. CACC systems must be designed in a way that are sufficiently robust against all special maneuvers such as cutting-into the CACC platoons by interfering vehicles or hard braking by leading cars. To address this problem, a Neural- Network (NN)-based cut-in detection and trajectory prediction scheme is proposed in the first part of this paper. Next, a probabilistic framework is developed in which the cut-in probability is calculated based on the output of the mentioned cut-in prediction block. Finally, a specific Stochastic Model Predictive Controller (SMPC) is designed which incorporates this cut-in probability to enhance its reaction against the detected dangerous cut-in maneuver. The overall system is implemented and its performance is evaluated using realistic driving scenarios from Safety Pilot Model Deployment (SPMD).Comment: 10 pages, Submitted as a journal paper at T-I

Improved information flow topology for vehicle convoy control

A vehicle convoy is a string of inter-connected vehicles moving together for mutual support, minimizing traffic congestion, facilitating people safety, ensuring string stability and maximizing ride comfort. There exists a trade-off among the convoy's performance indices, which is inherent in any existing vehicle convoy. The use of unrealistic information flow topology (IFT) in vehicle convoy control, generally affects the overall performance of the convoy, due to the undesired changes in dynamic parameters (relative position, speed, acceleration and jerk) experienced by the following vehicle. This thesis proposes an improved information flow topology for vehicle convoy control. The improved topology is of the two-vehicle look-ahead and rear-vehicle control that aimed to cut-off the trade-off with a more robust control structure, which can handle constraints, wider range of control regions and provide acceptable performance simultaneously. The proposed improved topology has been designed in three sections. The first section explores the single vehicle's dynamic equations describing the derived internal and external disturbances modeled together as a unit. In the second section, the vehicle model is then integrated into the control strategy of the improved topology in order to improve the performance of the convoy to two look-ahead and rear. The changes in parameters of the improved convoy topology are compared through simulation with the most widely used conventional convoy topologies of one-vehicle look-ahead and that of the most human-driver like (the two-vehicle look-ahead) convoy topology. The results showed that the proposed convoy control topology has an improved performance with an increase in the intervehicular spacing by 19.45% and 18.20% reduction in acceleration by 20.28% and 15.17% reduction in jerk by 25.09% and 6.25% as against the one-look-ahead and twolook- ahead respectively. Finally, a model predictive control (MPC) system was designed and combined with the improved convoy topology to strictly control the following vehicle. The MPC serves the purpose of handling constraints, providing smoother and satisfactory responses and providing ride comfort with no trade-off in terms of performance or stability. The performance of the proposed MPC based improved convoy topology was then investigated via simulation and the results were compared with the previously improved convoy topology without MPC. The improved convoy topology with MPC provides safer inter-vehicular spacing by 13.86% refined the steady speed to maneuvering speed, provided reduction in acceleration by 32.11% and a huge achievement was recorded in reduction in jerk by 55.12% as against that without MPC. This shows that the MPC based improved convoy control topology gave enough spacing for any uncertain application of brake by the two look-ahead or further acceleration from the rear-vehicle. Similarly, manoeuvering speed was seen to ensure safety ahead and rear, ride comfort was achieved due to the low acceleration and jerk of the following vehicle. The controlling vehicle responded to changes, hence good handling was achieved

Intelligent Operation System for the Autonomous Vehicle Fleet

Modular vehicles are vehicles with interchangeable substantial components also known as modules. Fleet modularity provides extra operational flexibility through on-field actions, in terms of vehicle assembly, disassembly, and reconfiguration (ADR). The ease of assembly and disassembly of modular vehicles enables them to achieve real-time fleet reconfiguration, which is proven as beneficial in promoting fleet adaptability and in saving ownership costs. The objective of military fleet operation is to satisfy uncertain demands on time while providing vehicle maintenance. To quantify the benefits and burdens from modularity in military operation, a decision support system is required to yield autonomously operation strategies for comparing the (near) optimal fleet performance for different vehicle architectures under diverse scenarios. The problem is challenging because: 1) fleet operation strategies are numerous, especially when modularity is considered; 2) operation actions are time-delayed and time-varying; 3) vehicle damages and demands are highly uncertain; 4) available capacity for ADR actions and vehicle repair is constrained. Finally, to explore advanced tactics enabled by fleet modularity, the competition between human-like and adversarial forces is required, where each force is capable to autonomously perceive and analyze field information, learn enemy's behavior, forecast enemy's actions, and prepare an operation plan accordingly. Currently, methodologies developed specifically for fleet competition are only valid for single type of resources and simple operation rules, which are impossible to implement in modular fleet operation. This dissertation focuses on a new general methodology to yield decisions in operating a fleet of autonomous military vehicles/robots in both conventional and modular architectures. First, a stochastic state space model is created to represent the changes in fleet dynamics caused by operation actions. Then, a stochastic model predictive control is customized to manage the system dynamics, which is capable of real-time decision making. Including modularity increases the complexity of fleet operation problem, a novel intelligent agent based model is proposed to ensure the computational efficiency and also imitate the collaborative decisions making process of human-like commanders. Operation decisions are distributed to several agents with distinct responsibility. Agents are designed in a specific way to collaboratively make and adjust decisions through selectively sharing information, reasoning the causality between events, and learning the other's behavior, which are achieved by real-time optimization and artificial intelligence techniques. To evaluate the impacts from fleet modularity, three operation problems are formulated: (i) simplified logistic mission scenario: operate a fleet to guarantee the readiness of vehicles at battlefields considering the stochasticity in inventory stocks and mission requirements; (ii) tactical mission scenario: deliver resources to battlefields with stochastic requirements of vehicle repairs and maintenance; (iii) attacker-defender game: satisfy the mission requirements with minimized losses caused by uncertain assaults from an enemy. The model is also implemented for a civilian application, namely the real-time management of reconfigurable manufacturing systems (RMSs). As the number of RMS configurations increases exponentially with the size of the line and demand changes frequently, two challenges emerge: how to efficiently select the optimal configuration given limited resources, and how to allocate resources among lines. According to the ideas in modular fleet operation, a new mathematical approach is presented for distributing the stochastic demands and exchanging machines or modules among lines (which are groups of machines) as a bidding process, and for adaptively configuring these lines and machines for the resulting shared demand under a limited inventory of configurable components.PHDMechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147588/1/lixingyu_2.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/147588/2/lixingyu_1.pd

Supervisory Control Optimization for a Series Hybrid Electric Vehicle with Consideration of Battery Thermal Management and Aging

This dissertation integrates battery thermal management and aging into the supervisory control optimization for a heavy-duty series hybrid electric vehicle (HEV). The framework for multi-objective optimization relies on novel implementation of the Dynamic Programing algorithm, and predictive models of critical phenomena. Electrochemistry based battery aging model is integrated into the framework to assesses the battery aging rate by considering instantaneous lithium ion (Li+) surface concentration rather than average concentration. This creates a large state-action space. Therefore, the computational effort required to solve a Deterministic or Stochastic Dynamic Programming becomes prohibitively intense, and a neuro-dynamic programming approach is proposed to remove the ‘curse of dimensionality’ in classical dynamic programming. First, unified simulation framework is developed for in-depth studies of series HEV system. The integration of a refrigerant system model enables prediction of energy use for cooling the battery pack. Side reaction, electrolyte decomposition, is considered as the main aging mechanism of LiFePO4/Graphite battery, and an electrochemical model is integrated to predict side reaction rate and the resulting fading of capacity and power. An approximate analytical solution is used to solve the partial difference equations (PDEs) for Li+ diffusion. Comparing with finite difference method, it largely reduces the number of states with only a slight penalty on prediction accuracy. This improves computational efficiency, and enables inclusion of the electrochemistry based aging model in the power management optimization framework. Next, a stochastic dynamic programming (SDP) approach is applied to the optimization of supervisory control. Auxiliary cooling power is included in addition to vehicle propulsion. Two objectives, fuel economy and battery life, are optimized by weighted sum method. To reduce the computation load, a simplified battery aging model coupled with equivalent circuit model is used in SDP optimization; Li+ diffusion dynamics are disregarded, and surface concentration is represented by the average concentration. This reduces the system state number to four with two control inputs. A real-time implementable strategy is generated and embedded into the supervisory controller. The result shows that SDP strategy can improve fuel economy and battery life simultaneously, comparing with Thermostatic SOC strategy. Further, the tradeoff between fuel consumption and active Li+ loss is studied under different battery temperature. Finally, the accuracy of battery aging model for optimization is improved by adding Li+ diffusion dynamics. This increases the number of states and brings challenges to classical dynamic programming algorithms. Hence, a neuro-dynamic programming (NDP) approach is proposed for the problem with large state-action space. It combines the idea of functional approximation and temporal difference learning with dynamic programming; in that case the computation load increases linearly with the number of parameters in the approximate function, rather than exponentially with state space. The result shows that ability of NDP to solve the complex control optimization problem reliably and efficiently. The battery-aging conscientious strategy generated by NDP optimization framework further improves battery life by 3.8% without penalty on fuel economy, compared to SDP strategy. Improvements of battery life compared to the heuristic strategy are much larger, on the order of 65%. This leads to progressively larger fuel economy gains over time