623 research outputs found
A survey on fiber nonlinearity compensation for 400 Gbps and beyond optical communication systems
Optical communication systems represent the backbone of modern communication
networks. Since their deployment, different fiber technologies have been used
to deal with optical fiber impairments such as dispersion-shifted fibers and
dispersion-compensation fibers. In recent years, thanks to the introduction of
coherent detection based systems, fiber impairments can be mitigated using
digital signal processing (DSP) algorithms. Coherent systems are used in the
current 100 Gbps wavelength-division multiplexing (WDM) standard technology.
They allow the increase of spectral efficiency by using multi-level modulation
formats, and are combined with DSP techniques to combat the linear fiber
distortions. In addition to linear impairments, the next generation 400 Gbps/1
Tbps WDM systems are also more affected by the fiber nonlinearity due to the
Kerr effect. At high input power, the fiber nonlinear effects become more
important and their compensation is required to improve the transmission
performance. Several approaches have been proposed to deal with the fiber
nonlinearity. In this paper, after a brief description of the Kerr-induced
nonlinear effects, a survey on the fiber nonlinearity compensation (NLC)
techniques is provided. We focus on the well-known NLC techniques and discuss
their performance, as well as their implementation and complexity. An extension
of the inter-subcarrier nonlinear interference canceler approach is also
proposed. A performance evaluation of the well-known NLC techniques and the
proposed approach is provided in the context of Nyquist and super-Nyquist
superchannel systems.Comment: Accepted in the IEEE Communications Surveys and Tutorial
A new methodology for network scale simulation of emerging power line communication standards
This paper presents the development of a new methodology for the simulation of Power Line Communication (PLC) within the popular Electromagnetic Transients Programme-Alternative Transients Programme (EMTP-ATP). As a first application, the comparative performance of the emerging Orthogonal Frequency Division Multiplexing (OFDM) based Prime and G3-PLC narrowband standards is investigated. Models of both standards have been created within the EMTP-ATP and simulations performed using frequency dependent line models and realistic transformer models as terminations. It is observed that both standards are severely affected by the highly frequency selective nature of the MV power line channel and a more considered choice of OFDM parameters may be necessary for optimal performance on MV networks
Jointly Optimal Channel Pairing and Power Allocation for Multichannel Multihop Relaying
We study the problem of channel pairing and power allocation in a
multichannel multihop relay network to enhance the end-to-end data rate. Both
amplify-and-forward (AF) and decode-and-forward (DF) relaying strategies are
considered. Given fixed power allocation to the channels, we show that channel
pairing over multiple hops can be decomposed into independent pairing problems
at each relay, and a sorted-SNR channel pairing strategy is sum-rate optimal,
where each relay pairs its incoming and outgoing channels by their SNR order.
For the joint optimization of channel pairing and power allocation under both
total and individual power constraints, we show that the problem can be
decoupled into two subproblems solved separately. This separation principle is
established by observing the equivalence between sorting SNRs and sorting
channel gains in the jointly optimal solution. It significantly reduces the
computational complexity in finding the jointly optimal solution. It follows
that the channel pairing problem in joint optimization can be again decomposed
into independent pairing problems at each relay based on sorted channel gains.
The solution for optimizing power allocation for DF relaying is also provided,
as well as an asymptotically optimal solution for AF relaying. Numerical
results are provided to demonstrate substantial performance gain of the jointly
optimal solution over some suboptimal alternatives. It is also observed that
more gain is obtained from optimal channel pairing than optimal power
allocation through judiciously exploiting the variation among multiple
channels. Impact of the variation of channel gain, the number of channels, and
the number of hops on the performance gain is also studied through numerical
examples.Comment: 15 pages. IEEE Transactions on Signal Processin
Jointly Optimal Channel Pairing and Power Allocation for Multichannel Multihop Relaying
We study the problem of channel pairing and power allocation in a
multichannel multihop relay network to enhance the end-to-end data rate. Both
amplify-and-forward (AF) and decode-and-forward (DF) relaying strategies are
considered. Given fixed power allocation to the channels, we show that channel
pairing over multiple hops can be decomposed into independent pairing problems
at each relay, and a sorted-SNR channel pairing strategy is sum-rate optimal,
where each relay pairs its incoming and outgoing channels by their SNR order.
For the joint optimization of channel pairing and power allocation under both
total and individual power constraints, we show that the problem can be
decoupled into two subproblems solved separately. This separation principle is
established by observing the equivalence between sorting SNRs and sorting
channel gains in the jointly optimal solution. It significantly reduces the
computational complexity in finding the jointly optimal solution. It follows
that the channel pairing problem in joint optimization can be again decomposed
into independent pairing problems at each relay based on sorted channel gains.
The solution for optimizing power allocation for DF relaying is also provided,
as well as an asymptotically optimal solution for AF relaying. Numerical
results are provided to demonstrate substantial performance gain of the jointly
optimal solution over some suboptimal alternatives. It is also observed that
more gain is obtained from optimal channel pairing than optimal power
allocation through judiciously exploiting the variation among multiple
channels. Impact of the variation of channel gain, the number of channels, and
the number of hops on the performance gain is also studied through numerical
examples.Comment: 15 pages. IEEE Transactions on Signal Processin
Discrete Multitone Modulation for Maximizing Transmission Rate in Step-Index Plastic Optical Fibres
The use of standard 1-mm core-diameter step-index plastic optical fiber (SI-POF) has so far been mainly limited to distances of up to 100 m and bit-rates in the order of 100 Mbit/s. By use of digital signal processing, transmission performance of such optical links can be improved. Among the different technical solutions proposed, a promising one is based on the use of discrete multitone (DMT) modulation, directly applied to intensity-modulated, direct detection (IM/DD) SI-POF links. This paper presents an overview of DMT over SI-POF and demonstrates how DMT can be used to improve transmission rate in such IM/DD systems. The achievable capacity of an SI-POF channel is first analyzed theoretically and then validated by experimental results. Additionally, first experimental demonstrations of a real-time DMT over SI-POF system are presented and discusse
Low-complexity frequency synchronization for wireless OFDM systems
Ph.DNUS-TU/E JOINT PH.D. PROGRAMM
- …