Cross-layer link adaptation for goodput optimization in MIMO BIC-OFDM systems

This work proposes a novel cross-layer link performance prediction (LPP) model and link adaptation (LA) strategy for soft-decoded multiple-input multiple-output (MIMO) bit-interleaved coded orthogonal frequency division multiplexing (BIC-OFDM) systems employing hybrid automatic repeat request (HARQ) protocols. The derived LPP, exploiting the concept of effective signal-to-noise ratio mapping (ESM) to model system performance over frequency-selective channels, does not only account for the actual channel state information at the transmitter and the adoption of practical modulation and coding schemes (MCSs), but also for the effect of the HARQ mechanism with bit-level combining at the receiver. Such method, named aggregated ESM, or αESM for short, exhibits an accurate performance prediction combined with a closed-form solution, enabling a flexible LA strategy, that selects at every protocol round the MCS maximizing the expected goodput (EGP), i.e., the number of correctly received bits per unit of time. The analytical expression of the EGP is derived capitalizing on the αESM and resorting to the renewal theory. Simulation results carried out in realistic wireless scenarios corroborate our theoretical claims and show the performance gain obtained by the proposed αESM-based LA strategy when compared with the best LA algorithms proposed so far for the same kind of systems

Layered Video Transmission on Adaptive OFDM Wireless Systems

Future wireless video transmission systems will consider orthogonal frequency division multiplexing (OFDM) as the basic modulation technique due to its robustness and low complexity implementation in the presence of frequency-selective channels. Recently, adaptive bit loading techniques have been applied to OFDM showing good performance gains in cable transmission systems. In this paper a multilayer bit loading technique, based on the so called "ordered subcarrier selection algorithm," is proposed and applied to a Hiperlan2-like wireless system at 5 GHz for efficient layered multimedia transmission. Different schemes realizing unequal error protection both at coding and modulation levels are compared. The strong impact of this technique in terms of video quality is evaluated for MPEG-4 video transmission

LDPC code-based bandwidth efficient coding schemes for wireless communications

This dissertation deals with the design of bandwidth-efficient coding schemes with Low-Density Parity-Check (LDPC) for reliable wireless communications. Code design for wireless channels roughly falls into three categories: (1) when channel state information (CSI) is known only to the receiver (2) more practical case of partial CSI at the receiver when the channel has to be estimated (3) when CSI is known to the receiver as well as the transmitter. We consider coding schemes for all the above categories. For the first scenario, we describe a bandwidth efficient scheme which uses highorder constellations such as QAM over both AWGN as well as fading channels. We propose a simple design with LDPC codes which combines the good properties of Multi-level Coding (MLC) and bit-interleaved coded-modulation (BICM) schemes. Through simulations, we show that the proposed scheme performs better than MLC for short-medium lengths on AWGN and block-fading channels. For the first case, we also characterize the rate-diversity tradeoff of MIMO-OFDM and SISO-OFDM systems. We design optimal coding schemes which achieve this tradeoff when transmission is from a constrained constellation. Through simulations, we show that with a sub-optimal iterative decoder, the performance of this coding scheme is very close to the optimal limit for MIMO (flat quasi-static fading), MIMO-OFDM and SISO OFDM systems. For the second case, we design non-systematic Irregular Repeat Accumulate (IRA) codes, which are a special class of LDPC codes, for Inter-Symbol Interference (ISI) fading channels when CSI is estimated at the receiver. We use Orthogonal Frequency Division Multiplexing (OFDM) to convert the ISI fading channel into parallel flat fading subchannels. We use a simple receiver structure that performs iterative channel estimation and decoding and use non-systematic IRA codes that are optimized for this receiver. This combination is shown to perform very close to a receiver with perfect CSI and is also shown to be robust to change in the number of channel taps and Doppler. For the third case, we look at bandwidth efficient schemes for fading channels that perform close to capacity when the channel state information is known at the transmitter as well as the receiver. Schemes that achieve capacity with a Gaussian codebook for the above system are already known but not for constrained constellations. We derive the near-optimum scheme to achieve capacity with constrained constellations and then propose coding schemes which perform close to capacity. Through linear transformations, a MIMO system can be converted into non-interfering parallel subchannels and we further extend the proposed coding schemes to the MIMO case too

GOODPUT BASED ADAPTIVE MODULATION AND CODING ALGORITHM FOR BIC-OFDM SYSTEMS

WiMAX IEEE 802.16m standard description and implementation of simulation software. SISO and MIMO techniques(open loop and closed loop) implementation and resultis validation. A novel physical abstraction and Link layer prediction for 802.16m MIMO BIC-OFDM system based on goodput maximization: Effective SNR mapping, with low complexity but same performance or even better compared with MIESM, called novel kESM. Theoretical derivation of novel kESM physical abstraction technique, comparison between kESM and MI-ESM / EESM. Goodput oriented adaptive modulation and coding algorithm for BIC-OFDM wireless system based on above-mentioned abstraction. Theoretical derivation and dissertation. Simulations of 802.16m WiMAX system using C++ and C++ with IT++ libraries(used in NEWCOMM++ project). Various graphic rapresentation for different modulation and coding schemas, dissertation abuot visual and practical results

Performance of Turbo Coded OFDM in Wireless Application

Orthogonal Frequency Division Multiplexing (OFDM) has become a popular modulation method in high speed wireless communications. By partitioning a wideband fading channel into flat narrowband channels, OFDM is able to mitigate the detrimental effects of multi path fading using a simple one- tap equalizer. There is a growing need to quickly transmit information wirelessly and accurately. Engineers have already combine techniques such as OFDM suitable for high data rate transmission with forward error correction (FEC) methods over wireless channels. In this thesis, we enhance the system throughput of a working OFDM system by adding turbo coding. The smart use of coding and power allocation in OFDM will be useful to the desired performance at higher data rates. Error control codes have become a vital part of modern digital wireless systems, enabling reliable transmission to be achieved over noisy channels. Over the past decade, turbo codes have been widely considered to be the most powerful error control code of practical importance. In the same time-scale, mixed voice/data networks have advanced further and the concept of global wireless networks and terrestrial links has emerged. Such networks present the challenge of optimizing error control codes for different channel types, and for the different qualities of service demanded by voice and data

Performance analysis of turbo coded OFDM in wireless application

Orthogonal Frequency Division Multiplexing (OFDM) has become a popular modulation method in high speed wireless communications. By partitioning a wideband fading channel into flat narrowband channels, OFDM is able to mitigate the detrimental effects of multi path fading using a simple one- tap equalizer. There is a growing need to quickly transmit information wirelessly and accurately.Engineers have already combine techniques such as OFDM suitable for high data rate transmission with forward error correction (FEC) methods over wireless channels. In this thesis, we enhance the system throughput of a working OFDM system by adding turbo coding. The smart use of coding and power allocation in OFDM will be useful to the desired performance at higher data rates.Error control codes have become a vital part of modern digital wireless systems,enabling reliable transmission to be achieved over noisy channels. Over the past decade,turbo codes have been widely considered to be the most powerful error control code of practical importance. In the same time-scale, mixed voice/data networks have advanced further and the concept of global wireless networks and terrestrial links has emerged. Such networks present the challenge of optimizing error control codes for different channel types,and for the different qualities of service demanded by voice and data