A survey of performance enhancement of transmission control protocol (TCP) in wireless ad hoc networks

This Article is provided by the Brunel Open Access Publishing Fund - Copyright @ 2011 Springer OpenTransmission control protocol (TCP), which provides reliable end-to-end data delivery, performs well in traditional wired network environments, while in wireless ad hoc networks, it does not perform well. Compared to wired networks, wireless ad hoc networks have some specific characteristics such as node mobility and a shared medium. Owing to these specific characteristics of wireless ad hoc networks, TCP faces particular problems with, for example, route failure, channel contention and high bit error rates. These factors are responsible for the performance degradation of TCP in wireless ad hoc networks. The research community has produced a wide range of proposals to improve the performance of TCP in wireless ad hoc networks. This article presents a survey of these proposals (approaches). A classification of TCP improvement proposals for wireless ad hoc networks is presented, which makes it easy to compare the proposals falling under the same category. Tables which summarize the approaches for quick overview are provided. Possible directions for further improvements in this area are suggested in the conclusions. The aim of the article is to enable the reader to quickly acquire an overview of the state of TCP in wireless ad hoc networks.This study is partly funded by Kohat University of Science & Technology (KUST), Pakistan, and the Higher Education Commission, Pakistan

Memory resource balancing for virtualized computing

Virtualization has become a common abstraction layer in modern data centers. By multiplexing hardware resources into multiple virtual machines (VMs) and thus enabling several operating systems to run on the same physical platform simultaneously, it can effectively reduce power consumption and building size or improve security by isolating VMs. In a virtualized system, memory resource management plays a critical role in achieving high resource utilization and performance. Insufficient memory allocation to a VM will degrade its performance dramatically. On the contrary, over-allocation causes waste of memory resources. Meanwhile, a VM’s memory demand may vary significantly. As a result, effective memory resource management calls for a dynamic memory balancer, which, ideally, can adjust memory allocation in a timely manner for each VM based on their current memory demand and thus achieve the best memory utilization and the optimal overall performance. In order to estimate the memory demand of each VM and to arbitrate possible memory resource contention, a widely proposed approach is to construct an LRU-based miss ratio curve (MRC), which provides not only the current working set size (WSS) but also the correlation between performance and the target memory allocation size. Unfortunately, the cost of constructing an MRC is nontrivial. In this dissertation, we first present a low overhead LRU-based memory demand tracking scheme, which includes three orthogonal optimizations: AVL-based LRU organization, dynamic hot set sizing and intermittent memory tracking. Our evaluation results show that, for the whole SPEC CPU 2006 benchmark suite, after applying the three optimizing techniques, the mean overhead of MRC construction is lowered from 173% to only 2%. Based on current WSS, we then predict its trend in the near future and take different strategies for different prediction results. When there is a sufficient amount of physical memory on the host, it locally balances its memory resource for the VMs. Once the local memory resource is insufficient and the memory pressure is predicted to sustain for a sufficiently long time, a relatively expensive solution, VM live migration, is used to move one or more VMs from the hot host to other host(s). Finally, for transient memory pressure, a remote cache is used to alleviate the temporary performance penalty. Our experimental results show that this design achieves 49% center-wide speedup

Contrôle de Congestion dans les Réseaux Véhiculaires

Cette thèse analyse la possibilité d'utiliser des communications sans fil inter-véhiculaires pour améliorer la sécurité routière. Les performances du nouveau réseau ainsi créé (réseau ad-hoc véhiculaire) sont étudiées analytiquement et par des simulations dans un environnement réaliste. La thèse se concentre surtout sur des scénarios avec une forte densité de véhicules. Dans ce cas, l'accès au support devient un problème essentiel, en principal pour les applications de sécurité routière qui nécessitent une qualité de service élevée pour fonctionner dans un tel contexte. Ce travail montre que la version actuelle du standard IEEE 802.11, proposé comme méthode d'accès dans les réseaux véhiculaires, ne peut pas résoudre ce problème de passage à l'échelle pour supporter correctement les applications de sécurité routière. Plusieurs améliorations possibles sont analysées, liées à l'utilisation optimale de certains paramètres du protocole comme la taille de la fenêtre de contention ou bien le seuil de détection de la porteuse. Des nouveaux mécanismes adaptatifs visant ces paramètres sont proposés et les améliorations ainsi obtenues sont non-négligeables. Finalement, une nouvelle méthode d'accès est définie, en tenant compte des caractéristiques des applications de sécurité routière. Toujours basée sur des techniques CSMA, cette technique donne des résultats largement supérieurs à la version standard actuelle. ABSTRACT : The equipment of vehicles with wireless communication devices in order to improve road safety is a major component of a future intelligent transportation system. The success and availability of IEEE 802.11-based products make this technology the main competitor for the Medium Access Control (MAC) layer used in vehicle-to-vehicle communication. The IEEE 802.11p amendment has been specially designed in this special context of wireless access in vehicular environments. However, as all the other approaches based on Carrier Sense Multiple Access (CSMA), this protocol presents scalability problems, which leads to poor performance in high density scenarios, quite frequent in the case of a vehicular ad hoc network (VANET). This thesis studies the congestion control problem in the context of safety vehicular communications, with a special focus on the back-off mechanism and the carrier sense function. First of all, a number of important characteristics presented by the safety messages are discovered and understood by the means of an analytical framework. Second, the lessons learned from the analytical study are put into practice with the design of two adaptive mechanisms (one for the contention window and the other one for the carrier sense threshold) that take into account the local vehicular density. These mechanisms remain simple, but highly efficient, while also being straightforward to integrate in IEEE 802.11 devices. Finally, by taking into account the most important properties of a safety VANET, a new CSMA-based MAC protocol is proposed. This new access method, named Safety Range CSMA (SR-CSMA), relies on the idea that collisions can not be avoided in a high density network. However, by increasing the number of simultaneous transmissions between geographically distant nodes, SR-CSMA manages to better protect the immediate neighborhood, the most important area for safety applications

Experimental Evaluation of Large Scale WiFi Multicast Rate Control

WiFi multicast to very large groups has gained attention as a solution for multimedia delivery in crowded areas. Yet, most recently proposed schemes do not provide performance guarantees and none have been tested at scale. To address the issue of providing high multicast throughput with performance guarantees, we present the design and experimental evaluation of the Multicast Dynamic Rate Adaptation (MuDRA) algorithm. MuDRA balances fast adaptation to channel conditions and stability, which is essential for multimedia applications. MuDRA relies on feedback from some nodes collected via a light-weight protocol and dynamically adjusts the rate adaptation response time. Our experimental evaluation of MuDRA on the ORBIT testbed with over 150 nodes shows that MuDRA outperforms other schemes and supports high throughput multicast flows to hundreds of receivers while meeting quality requirements. MuDRA can support multiple high quality video streams, where 90% of the nodes report excellent or very good video quality

Congestion Control in Vehicular Ad Hoc Networks

The equipment of vehicles with wireless communication devices in order to improve road safety is a major component of a future intelligent transportation system. The success and availability of IEEE 802.11-based products make this technology the main competitor for the Medium Access Control (MAC) layer used in vehicle-to-vehicle communication. The IEEE 802.11p amendment has been specially designed in this special context of wireless access in vehicular environments. However, as all the other approaches based on Carrier Sense Multiple Access (CSMA), this protocol presents scalability problems, which leads to poor performance in high density scenarios, quite frequent in the case of a vehicular ad hoc network (VANET). This thesis studies the congestion control problem in the context of safety vehicular communications, with a special focus on the back-off mechanism and the carrier sense function. First of all, a number of important characteristics presented by the safety messages are discovered and understood by the means of an analytical framework. Second, the lessons learned from the analytical study are put into practice with the design of two adaptive mechanisms (one for the contention window and the other one for the carrier sense threshold) that take into account the local vehicular density. These mechanisms remain simple, but highly efficient, while also being straightforward to integrate in IEEE 802.11 devices. Finally, by taking into account the most important properties of a safety VANET, a new CSMA-based MAC protocol is proposed. This new access method, named Safety Range CSMA (SR-CSMA), relies on the idea that collisions can not be avoided in a high density network. However, by increasing the number of simultaneous transmissions between geographically distant nodes, SR-CSMA manages to better protect the immediate neighborhood, the most important area for safety applications