OutFlank Routing: Increasing Throughput in Toroidal Interconnection Networks

We present a new, deadlock-free, routing scheme for toroidal interconnection networks, called OutFlank Routing (OFR). OFR is an adaptive strategy which exploits non-minimal links, both in the source and in the destination nodes. When minimal links are congested, OFR deroutes packets to carefully chosen intermediate destinations, in order to obtain travel paths which are only an additive constant longer than the shortest ones. Since routing performance is very sensitive to changes in the traffic model or in the router parameters, an accurate discrete-event simulator of the toroidal network has been developed to empirically validate OFR, by comparing it against other relevant routing strategies, over a range of typical real-world traffic patterns. On the 16x16x16 (4096 nodes) simulated network OFR exhibits improvements of the maximum sustained throughput between 14% and 114%, with respect to Adaptive Bubble Routing.Comment: 9 pages, 5 figures, to be presented at ICPADS 201

The Effect Of Hot Spots On The Performance Of Mesh--Based Networks

Direct network performance is affected by different design parameters which include number of virtual channels, number of ports, routing algorithm, switching technique, deadlock handling technique, packet size, and buffer size. Another factor that affects network performance is the traffic pattern. In this thesis, we study the effect of hotspot traffic on system performance. Specifically, we study the effect of hotspot factor, hotspot number, and hot spot location on the performance of mesh-based networks. Simulations are run on two network topologies, both the mesh and torus. We pay more attention to meshes because they are widely used in commercial machines. Comparisons between oblivious wormhole switching and chaotic packet switching are reported. Overall packet switching proved to be more efficient in terms of throughput when compared to wormhole switching. In the case of uniform random traffic, it is shown that the differences between chaotic and oblivious routing are indistinguishable. Networks with low number of hotspots show better performance. As the number of hotspots increases network latency tends to increase. It is shown that when the hotspot factor increases, performance of packet switching is better than that of wormhole switching. It is also shown that the location of hotspots affects network performance particularly with the oblivious routers since their achieved latencies proved to be more vulnerable to changes in the hotspot location. It is also shown that the smaller the size of the network the earlier network saturation occurs. Further, it is shown that the chaos router’s adaptivity is useful in this case. Finally, for tori, performance is not greatly affected by hotspot presence. This is mostly due to the symmetric nature of tori

Performance Evaluation of XY and XTRANC Routing Algorithm for Network on Chip and Implementation using DART Simulator

In today’s world Network on Chip(NoC) is one of the most efficient on chip communication platform for System on Chip where a large amount of computational and storage blocks are integrated on a single chip. NoCs are scalable and have tackled the short commings of SoCs . In the first part of this project the basics of NoCs is explained which includes why we should use NoC , how to implement NoC ,various blocks of NoCs .The next part of the project deals with the implementation of XY routing algorithm in mesh (3*3) and mesh (4*4) network topologies. The throughput and latency curves for both the topologies were found and a through comparison was done by varying the no of virtual cannels. In the next part an improvised routing algorithm known as the extended torus(XTRANC) routing algorithm for NoCs implementation is explained. This algorithm is designed for inner torus mesh networks and provides better performance than usual routing algorithms. It has been implemented using the CONNECT simulator. Then the DART simulator was explored and two important components namely the flitqueue and the traffic generator was designed using this simulator

On the design of a high-performance adaptive router for CC-NUMA multiprocessors

Copyright © 2003 IEEEThis work presents the design and evaluation of an adaptive packet router aimed at supporting CC-NUMA traffic. We exploit a simple and efficient packet injection mechanism to avoid deadlock, which leads to a fully adaptive routing by employing only three virtual channels. In addition, we selectively use output buffers for implementing the most utilized virtual paths in order to reduce head-of-line blocking. The careful implementation of these features has resulted in a good trade off between network performance and hardware cost. The outcome of this research is a High-Performance Adaptive Router (HPAR), which adequately balances the needs of parallel applications: minimal network latency at low loads and high throughput at heavy loads. The paper includes an evaluation process in which HPAR is compared with other adaptive routers using FIFO input buffering, with or without additional virtual channels to reduce head-of-line blocking. This evaluation contemplates both the VLSI costs of each router and their performance under synthetic and real application workloads. To make the comparison fair, all the routers use the same efficient deadlock avoidance mechanism. In all the experiments, HPAR exhibited the best response among all the routers tested. The throughput gains ranged from 10 percent to 40 percent in respect to its most direct rival, which employs more hardware resources. Other results shown that HPAR achieves up to 83 percent of its theoretical maximum throughput under random traffic and up to 70 percent when running real applications. Moreover, the observed packet latencies were comparable to those exhibited by simpler routers. Therefore, HPAR can be considered as a suitable candidate to implement packet interchange in next generations of CC-NUMA multiprocessors.Valentín Puente, José-Ángel Gregorio, Ramón Beivide, and Cruz Iz

A Deadlock – Free Routing Algorithm for Torus Network

TORUS is a n-dimensional network topology. Each dimension will have k nodes.  A routing algorithm determines the sequence of channels for a packet to traverse from the source to destination. A new router design that significantly reduces the main drawback of worm hole switching – latency, is presented in this paper. Worm-hole switching is combined with virtual channel to provide better performance. Packet deadlock is avoided by verifying the freeness of the nodes before sending the packets to that node. The traditional ‘wormhole switching’ mechanism for routing in the torus network has the disadvantages such as link contention, message latency, need for large buffer size and finally a massive deadlock may appear. The recently proposed ‘clue’ algorithm, has the disadvantages such as difficulty in cut through the link by the packets, says nothing about loss of packets between a hop and storage overhead and complexity in dividing the virtual channels. We proposed an ‘Advanced Clue’ algorithm by combining the concepts of clue and flow controlled clue and also overcome the disadvantages of clue. We use two virtual channels and a buffer which gives a combination of clue and flow controlled clue. We also propose conditions that satisfy the reliability of the packet delivery between hops. The packet will be sent to the next hop and buffered in the current hop. The sending hop will set a timer and wait for the acknowledgement. If the acknowledgement is not arrived till the timer expired then, the packet will be resend, and otherwise the packet will be removed from the buffer. Keywords: Torus, Virtual channels, Cut – through Switching, Wormhole switching

Routing on the Channel Dependency Graph:: A New Approach to Deadlock-Free, Destination-Based, High-Performance Routing for Lossless Interconnection Networks

In the pursuit for ever-increasing compute power, and with Moore's law slowly coming to an end, high-performance computing started to scale-out to larger systems. Alongside the increasing system size, the interconnection network is growing to accommodate and connect tens of thousands of compute nodes. These networks have a large influence on total cost, application performance, energy consumption, and overall system efficiency of the supercomputer. Unfortunately, state-of-the-art routing algorithms, which define the packet paths through the network, do not utilize this important resource efficiently. Topology-aware routing algorithms become increasingly inapplicable, due to irregular topologies, which either are irregular by design, or most often a result of hardware failures. Exchanging faulty network components potentially requires whole system downtime further increasing the cost of the failure. This management approach becomes more and more impractical due to the scale of today's networks and the accompanying steady decrease of the mean time between failures. Alternative methods of operating and maintaining these high-performance interconnects, both in terms of hardware- and software-management, are necessary to mitigate negative effects experienced by scientific applications executed on the supercomputer. However, existing topology-agnostic routing algorithms either suffer from poor load balancing or are not bounded in the number of virtual channels needed to resolve deadlocks in the routing tables. Using the fail-in-place strategy, a well-established method for storage systems to repair only critical component failures, is a feasible solution for current and future HPC interconnects as well as other large-scale installations such as data center networks. Although, an appropriate combination of topology and routing algorithm is required to minimize the throughput degradation for the entire system. This thesis contributes a network simulation toolchain to facilitate the process of finding a suitable combination, either during system design or while it is in operation. On top of this foundation, a key contribution is a novel scheduling-aware routing, which reduces fault-induced throughput degradation while improving overall network utilization. The scheduling-aware routing performs frequent property preserving routing updates to optimize the path balancing for simultaneously running batch jobs. The increased deployment of lossless interconnection networks, in conjunction with fail-in-place modes of operation and topology-agnostic, scheduling-aware routing algorithms, necessitates new solutions to solve the routing-deadlock problem. Therefore, this thesis further advances the state-of-the-art by introducing a novel concept of routing on the channel dependency graph, which allows the design of an universally applicable destination-based routing capable of optimizing the path balancing without exceeding a given number of virtual channels, which are a common hardware limitation. This disruptive innovation enables implicit deadlock-avoidance during path calculation, instead of solving both problems separately as all previous solutions

Effects of injection pressure on network throughput

©2006 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.Recent parallel systems use multiple injection ports and various injection policies, but little is known about their impact on network performance. This paper evaluates the influence that these injection interfaces have on maximum sustained throughput in adaptive cut-through torus networks by modeling the number of injection queues (1 or 4), and the allocation of new packets to those queues. Network evaluations for medium to large size 2D tori show that designs with multiple injection ports do not improve performance under uniform traffic. On the contrary, they result in more pressure from the injection interface to acquire the scarce network resources of an already clogged system. Interestingly, for small networks, a single injection FIFO queue, with the HOLB it entails, indirectly provides the much needed injection control. For networks with thousands of nodes and multiple injection channels, as those being implemented in current massively parallel processors, this implicit form of congestion control is not enough. In such systems, restrictive injection policies are required to prevent routers from being flooded with new packets for loads beyond saturation.C. Izu, J. Miguel-Alonso, J.A. Gregori