Cost and energy efficient reconfigurable embedded platform using Spartan-6 FPGAs

Modern FPGAs with run-time reconfiguration allow the implementation of complex systems offering both the flexibility of software-based solutions combined with the performance of hardware. This combination of characteristics, together with the development of new specific methodologies, make feasible to reach new points of the system design space, and make embedded systems built on these platforms acquire more and more importance. However, the practical exploitation of this technique in fields that traditionally have relied on resource restricted embedded systems, is mainly limited by strict power consumption requirements, the cost and the high dependence of DPR techniques with the specific features of the device technology underneath. In this work, we tackle the previously reported problems, designing a reconfigurable platform based on the low-cost and low-power consuming Spartan-6 FPGA family. The full process to develop the platform will be detailed in the paper from scratch. In addition, the implementation of the reconfiguration mechanism, including two profiles, is reported. The first profile is a low-area and low-speed reconfiguration engine based mainly on software functions running on the embedded processor, while the other one is a hardware version of the same engine, implemented in the FPGA logic. This reconfiguration hardware block has been originally designed to the Virtex-5 family, and its porting process will be also described in this work, facing the interoperability problem among different families

A novel partial reconfiguration methodology for FPGAs of multichip systems

A number of SRAM-based field programmable gate arrays (FPGAs) allow for partial reconfiguration (PR). Partial reconfiguration can be used to maximize the resource utilization in these FPGAs. Any large design usually consists of many modular features that are never used all concurrently. An FPGA does not need to implement all these features at the same time provided that it can be reconfigured in a reasonable amount of time to implement the features that can be used simultaneously. The use of partial reconfiguration is ideal in this case, since it allows for just the features that are no longer needed to be replaced by the newly required features. Current methodologies use both external and self partial reconfiguration for this purpose. On mature multichip (MC) systems that have not made use of the PR features of their SRAM-based FPGA(s), however, these methodologies would require changes in the existing FPGA configuration protocol and/or associated hardware outside the array. This thesis presents a novel methodology that makes PR features available to these systems for the purpose of maximizing their FPGA resources without the modifications required by the current methodologies. The proposed methodology reuses an existing data interface to send the PR data to the array and directs this data to the FPGA’s internal configuration port. A prototype of this methodology is demonstrated on a commercial color space conversion (CSC) engine design using two Xilinx Virtex-II Pro FPGAs. In addition, the effectiveness of the proposed methodology is quantified by comparing the FPGA resource utilization of the original CSC engine design and that of the partial reconfigurable prototype above. Finally, since the application of partial reconfiguration inherently adds latency to the output of any design, the effects of the proposed methodology on the performance of the CSC engine are also studied and reported. This information will show that reconfiguring and loading the prototyped CSC engine in addition to processing a full image in it takes 683ms, which is within the target of one second

Fault Tolerant Nanosatellite Computing on a Budget

In this contribution, we present a CubeSat-compatible on-board computer (OBC) architecture that offers strong fault tolerance to enable the use of such spacecraft in critical and long-term missions. We describe in detail the design of our OBC’s breadboard setup, and document its composition from the component-level, all the way down to the software level. Fault tolerance in this OBC is achieved without resorting to radiation hardening, just intelligent through software. The OBC ages graceful, and makes use of FPGA-reconfiguration and mixed criticality. It can dynamically adapt to changing performance requirements throughout a space mission. We developed a proof-of-concept with several Xilinx Ultrascale and Ultrascale+ FPGAs. With the smallest Kintex Ultrascale+ KU3P device, we achieve 1.94W total power consumption at 300Mhz, well within the power budget range of current 2U CubeSats. To our knowledge, this is the first scalable and COTS-based, widely reproducible OBC solution which can offer strong fault coverage even for small CubeSats. To reproduce this OBC architecture, no custom-written, proprietary, or protected IP is needed, and the needed design tools are available free-of-charge to academics. All COTS components required to construct this architecture can be purchased on the open market, and are affordable even for academic and scientific CubeSat developers

TANGO: Transparent heterogeneous hardware Architecture deployment for eNergy Gain in Operation

The paper is concerned with the issue of how software systems actually use Heterogeneous Parallel Architectures (HPAs), with the goal of optimizing power consumption on these resources. It argues the need for novel methods and tools to support software developers aiming to optimise power consumption resulting from designing, developing, deploying and running software on HPAs, while maintaining other quality aspects of software to adequate and agreed levels. To do so, a reference architecture to support energy efficiency at application construction, deployment, and operation is discussed, as well as its implementation and evaluation plans.Comment: Part of the Program Transformation for Programmability in Heterogeneous Architectures (PROHA) workshop, Barcelona, Spain, 12th March 2016, 7 pages, LaTeX, 3 PNG figure

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

A fuzzy logic based dynamic reconfiguration scheme for optimal energy and throughput in symmetric chip multiprocessors

Embedded systems architectures have traditionally often been investigated and designed in order to achieve a greater throughput combined with minimum energy consumption. With the advent of reconfigurable architectures it is now possible to support algorithms to find optimal solutions for an improved energy and throughput balance. As a result of ongoing research several online and offline techniques and algorithm have been proposed for hardware adaptation. This paper presents a novel coarse-grained reconfigurable symmetric chip multiprocessor (SCMP) architecture managed by a fuzzy logic engine that balances performance and energy consumption. The architecture incorporates reconfigurable level 1 (L1) caches, power gated cores and adaptive on-chip network routers to allow minimizing leakage energy effects for inactive components. A coarse grained architecture was selected as to be a focus for this study as it typically allows for fast reconfiguration as compared to the fine-grained architectures, thus making it more feasible to be used for runtime adaption schemes. The presented architecture is analyzed using a set of OpenMP based parallel benchmarks and the results show significant improvements in performance while maintaining minimum energy consumption