175 research outputs found

    A survey on fractional order control techniques for unmanned aerial and ground vehicles

    Get PDF
    In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

    Development of Fault Diagnosis and Fault Tolerant Control Algorithms with Application to Unmanned Systems

    Get PDF
    Unmanned vehicles have been increasingly employed in real life. They include unmanned air vehicles (UAVs), unmanned ground vehicles (UGVs), unmanned spacecrafts, and unmanned underwater vehicles (UUVs). Unmanned vehicles like any other autonomous systems need controllers to stabilize and control them. On the other hand unmanned systems might subject to different faults. Detecting a fault, finding the location and severity of it, are crucial for unmanned vehicles. Having enough information about a fault, it is needed to redesign controller based on post fault characteristics of the system. The obtained controlled system in this case can tolerate the fault and may have a better performance. The main focus of this thesis is to develop Fault Detection and Diagnosis (FDD) algorithms, and Fault Tolerant Controllers (FTC) to increase performance, safety and reliability of various missions using unmanned systems. In the field of unmanned ground vehicles, a new kinematical control method has been proposed for the trajectory tracking of nonholonomic Wheeled Mobile Robots (MWRs). It has been experimentally tested on an UGV, called Qbot. A stable leader-follower formation controller for time-varying formation configuration of multiple nonholonomic wheeled mobile robots has also been presented and is examined through computer simulation. In the field of unmanned aerial vehicles, Two-Stage Kalman Filter (TSKF), Adaptive Two-Stage Kalman Filter (ATSKF), and Interacting Multiple Model (IMM) filter were proposed for FDD of the quadrotor helicopter testbed in the presence of actuator faults. As for space missions, an FDD algorithm for the attitude control system of the Japan Canada Joint Collaboration Satellite - Formation Flying (JC2Sat-FF) mission has been developed. The FDD scheme was achieved using an IMM-based FDD algorithm. The efficiency of the FDD algorithm has been shown through simulation results in a nonlinear simulator of the JC2Sat-FF. A fault tolerant fuzzy gain-scheduled PID controller has also been designed for a quadrotor unmanned helicopter in the presence of actuator faults. The developed FDD algorithms and fuzzy controller were evaluated through experimental application to a quadrotor helicopter testbed called Qball-X4

    Fault Separation Based on An Excitation Operator with Application to a Quadrotor UAV

    Full text link
    This paper presents an excitation operator based fault separation architecture for a quadrotor unmanned aerial vehicle (UAV) subject to loss of effectiveness (LoE) faults, actuator aging, and load uncertainty. The actuator fault dynamics is deeply excavated, containing the deep coupling information among the actuator faults, the system states, and control inputs. By explicitly considering the physical constraints and tracking performance, an excitation operator and corresponding integrated state observer are designed to estimate separately actuator fault and load uncertainty. Moreover, a fault separation maneuver and a safety controller are proposed to ensure the tracking performance when the excitation operator is injected. Both comparative simulation and flight experiments have demonstrated the effectiveness of the proposed scheme while maintaining high levels of tracking performance

    Design, Development and Implementation of Intelligent Algorithms to Increase Autonomy of Quadrotor Unmanned Missions

    Get PDF
    This thesis presents the development and implementation of intelligent algorithms to increase autonomy of unmanned missions for quadrotor type UAVs. A six-degree-of freedom dynamic model of a quadrotor is developed in Matlab/Simulink in order to support the design of control algorithms previous to real-time implementation. A dynamic inversion based control architecture is developed to minimize nonlinearities and improve robustness when the system is driven outside bounds of nominal design. The design and the implementation of the control laws are described. An immunity-based architecture is introduced for monitoring quadrotor health and its capabilities for detecting abnormal conditions are successfully demonstrated through flight testing. A vision-based navigation scheme is developed to enhance the quadrotor autonomy under GPS denied environments. An optical flow sensor and a laser range finder are used within an Extended Kalman Filter for position estimation and its estimation performance is analyzed by comparing against measurements from a GPS module. Flight testing results are presented where the performances are analyzed, showing a substantial increase of controllability and tracking when the developed algorithms are used under dynamically changing environments. Healthy flights, flights with failures, flight with GPS-denied navigation and post-failure recovery are presented

    Hybrid fault detection using kalman filter and neural network for quadrotor micro aerial vehicle

    Get PDF
    This thesis introduces the application of time-domain Hybrid Fault Detection (HFD) methods for application in a quadrotor Micro Aerial Vehicle (MAV). The application aims to solve one of the main problems of the quadrotor, which is its inability to reach the exact target location that the user intended. The problem may be due to a faulty signal happened in the sensor or the actuator side or both, causing the quadrotor unable to complete the task given. Among the reasons of the faulty signal are the occurrences of signal in quadrotor, in the sensor or actuator side, as well as possible communication problem. When actuator fault, sensor fault or both faults occur, the controllers cannot function well and hence its performance reduce. At the initial control design stage of quadrotor, it is usually designed under the assumption that no faults would occur in quadrotors. The Faulty Detection (FD) method is therefore crucial to ensure quadrotor system can work properly and efficiently. The proposed method for the fault detection in this study uses hybrid technique which combines the extended kalman filter and artificial neural network (ANN). Two classes of approaches are analysed: the fault system identification approach ANN and the observer-based approach using the extended kalman filter. The extended kalman filter recognizes data from the sensors of the system and indicates the residuals of the system in the sensor reading. Residuals prediction is based on the fault magnitude and the time occurrence of fault. The information will then be fed to ANN, which consists of a bank of parameter estimation that generates the failure state. ANN is an algorithm that is used to determine the fault condition and determine its severity in the quadrotor system. ANN is designed based on nonlinear autoregressive network with exogenous inputs (NARX) scheme so that it can be trained to generate output based on the simulation behaviours of the quadrotor. The different fault locations are used as input vectors for training an artificial neural network (ANN). The result of the residual signal before filtration and after filtration showed that Kalman-ANN is able to identify single fault as well as multiple faults. For all individual faults including the multiple fault detection, the accuracy of the detection is 78.89 percent. It can be conclude that the newly proposed hybrid FD method in this thesis is able to accurately detect the location fault, for both the sensor and actuator faults simultaneous in the quadrotor

    Fault Diagnosis in a Networked Control System under Communication Constraints: A Quadrotor Application

    Get PDF
    This paper considers the problem of attitude sensor fault diagnosis in a quadrotor helicopter. The proposed approach is composed of two stages. The first one is the modelling of the system attitude dynamics taking into account the induced communication constraints. Then a robust fault detection and evaluation scheme is proposed using a post-filter designed under a particular design objective. This approach is compared with previous results based on the standard Kalman filter and gives better results for sensor fault diagnosis

    Aggressive maneuver oriented robust actuator fault estimation of a 3-DOF helicopter prototype considering measurement noises

    Get PDF
    This paper presents a robust actuator fault estimation strategy design for a 3-DOF helicopter prototype which can be adapted to aggressive maneuvers. First, considering large pitch angle condition during flight, nonlinear coupling characteristic of the helicopter system is exploited. As the pitch angle can be measured in real time, a polytopic linear parameter-varying (LPV) model is developed for the helicopter system. Furthermore, considering measurement noises in the actual helicopter system, the dynamical model of helicopter system is modified accordingly. Then, based on the modified polytopic LPV model, a robust unknown input observer (UIO) is developed for the helicopter system to realize actuator fault estimation, in which both measurement noises and large pitch angle are considered. Robust performance of proposed fault estimation approach is guaranteed by using energy-to-energy strategy. And the observer gains are calculated by using linear matrix inequalities. Finally, based on a 3-DOF helicopter prototype, both simulations and experiments are conducted. The effects of measurement noises and large pitch angle on the fault estimation performance are sufficiently demonstrated. And effectiveness as well as advantages of the proposed observer is verified by using comparative analysis

    Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles

    Get PDF
    With the increasing demand for unmanned aerial vehicles (UAVs) in both military and civilian applications, critical safety issues need to be specially considered in order to make better and wider use of them. UAVs are usually employed to work in hazardous and complex environments, which may seriously threaten the safety and reliability of UAVs. Therefore, the safety and reliability of UAVs are becoming imperative for development of advanced intelligent control systems. The key challenge now is the lack of fully autonomous and reliable control techniques in face of different operation conditions and sophisticated environments. Further development of unmanned aerial vehicle (UAV) control systems is required to be reliable in the presence of system component faults and to be insensitive to model uncertainties and external environmental disturbances. This thesis research aims to design and develop novel control schemes for UAVs with consideration of all the factors that may threaten their safety and reliability. A novel adaptive sliding mode control (SMC) strategy is proposed to accommodate model uncertainties and actuator faults for an unmanned quadrotor helicopter. Compared with the existing adaptive SMC strategies in the literature, the proposed adaptive scheme can tolerate larger actuator faults without stimulating control chattering due to the use of adaptation parameters in both continuous and discontinuous control parts. Furthermore, a fuzzy logic-based boundary layer and a nonlinear disturbance observer are synthesized to further improve the capability of the designed control scheme for tolerating model uncertainties, actuator faults, and unknown external disturbances while preventing overestimation of the adaptive control parameters and suppressing the control chattering effect. Then, a cost-effective fault estimation scheme with a parallel bank of recurrent neural networks (RNNs) is proposed to accurately estimate actuator fault magnitude and an active fault-tolerant control (FTC) framework is established for a closed-loop quadrotor helicopter system. Finally, a reconfigurable control allocation approach is combined with adaptive SMC to achieve the capability of tolerating complete actuator failures with application to a modified octorotor helicopter. The significance of this proposed control scheme is that the stability of the closed-loop system is theoretically guaranteed in the presence of both single and simultaneous actuator faults

    ??????????????? ??? ????????? ???????????? ???????????? ??? ???????????? ?????? ?????????

    Get PDF
    Department of Mechanical EngineeringThis work presents fault detection and recovery system when the bias fault occurs in the yaw rate part of the gyro (z-gyro) during the quadrotor flight. Kalman filter based on the dynamic model of the quadrotor and chi-square test is used to detect the fault. The auxiliary yaw rate was calculated through the homography matrix between the image frames obtained by the camera which is filming the ground plane. This was used as a redundant z-gyro sensor and switched with the faulty sensor to perform the recovery process. Additionally, in constant bias fault scenario, camera is used to correct biased sensor data. Through this, it was possible to follow the path stably even if there was a bias during flights. The system was implemented with the ROS environment and simulated in Gazebo.ope
    corecore