Active Charge Equalizer of Li-Ion Battery Cells Using Double Energy Carriers

In this work, a new active balancing circuit is proposed. This circuit consists of a cell-access network and an energy-transfer network. The cell-access network requires 2n + 6 switches, where n is the number of cells, and creates an energy-transfer path between unbalanced cells and the energy-transfer network. The energy-transfer network has double energy carriers and simultaneously implements cell-to-pack and pack-to-cell balancing operations without overlapping. As a result, a high power rate and fast balancing operation can be achieved by using two energy carriers in a single balancing circuit. The prototype of a proposed balancing circuit was built for six cells and then tested under various conditions; all cells in the state of charge (SOC) region of 70% to 80% were equalized after 93 min, and one charging/discharging period in the SOC region of 10% to 90% was increased by 8.58% compared to the non-balancing operation. These results show that the proposed circuit is a good way to balance charges among batteries in a battery pack.11Ysciescopu

A Modular Multi-level Converter for Energy Management of Hybrid Energy-Storage Systems in Electric Vehicles

Electric vehicles (EVs) are substantial applications of clean energy. Their effectiveness for mainstream transportation is predicated on the efficient use of stored energy within the vehicles’ power pack. Among rechargeable storage solutions, lithium-ion (Li-ion) battery cells have high energy density making them suitable to supply the EVs’ average power. However, the peak power requirements of the vehicles exert stress on the Li-ion cells due to their low pulsating power capabilities. Ultracapacitors can be used instead as the power-pulsating storage elements given their superior power density. Incorporating the two cell types for energy storage signifies a hybrid configuration that leads to challenging tasks in managing the energy between cells due to varying cell dynamics. Therefore, this study investigated the design of an end-to-end hybrid energy-storage and management system. The limitations of existing power electronics and control schemes were identified based on comparative analysis, both on a cell level and on a system level. Subsequently, an energy system was developed that utilized modular multi-level converters to manage the energy between the different cell types. The formulated control strategy accounted for various power modes and added immense flexibility in charge sharing through diverse switching states. Furthermore, the proposed configuration eliminated the conventional need for a system level drive inverter feeding the EV motor. Electro-mechanical modeling results and physical design merits verified the proposed configuration’s effectiveness in improving EV efficiency

Cascaded Converters For Integration And Management Of Grid Level Energy Storage Systems

ABSTRACT CASCADED CONVERTERS FOR INTEGRATION AND MANAGEMENT OF GRID-LEVEL ENERGY STORAGE SYSTEMS by ZUHAIR ALAAS December 2017 Advisor: Dr. Caisheng Wang Major: ELECTRICAL ENGINEERING Degree: Doctor of Philosophy This research work proposes two cascaded multilevel inverter structures for BESS. The gating and switching control of switching devices in both inverter typologies are done by using a phase-shifted PWM scheme. The first proposed isolated multilevel inverter is made up of three-phase six-switch inverter blocks with a reduced number of power components compared with traditional isolated CHB. The suggested isolated converter has only one battery string for three-phase system that can be used for high voltage and high power applications such as grid connected BESS and alternative energy systems. The isolated inverter enables dq frame based simple control and eliminates the issues of single-phase pulsating power, which can cause detrimental impacts on certain dc sources. Simulation studies have been carried out to compare the proposed isolated multi-level inverter with an H-bridge cascaded transformer inverter. The simulation results verified the performance of the isolated inverter. The second proposed topology is a Hierarchal Cascaded Multilevel Converter (HCMC) with phase to phase SOC balancing capability which also for high voltage and high power battery energy storage systems. The HCMC has a hybrid structure of half-bridge converters and H-bridge inverters and the voltage can be hierarchically cascaded to reach the desired value at the half-bridge and the H-bridge levels. The uniform SOC battery management is achieved by controlling the half-bridge converters that are connected to individual battery modules/cells. Simulation studies and experimental results have been carried on a large scale battery system under different operating conditions to verify the effectiveness of the proposed inverters. Moreover, this dissertation presents a new three-phase SOC equalizing circuit, called six-switch energy-level balancing circuit (SSBC), which can be used to realize uniform SOC operation for full utilization of the battery capacity in proposed HCMC or any CMI inverter while keeping balanced three-phase operation. A sinusoidal PWM modulation technique is used to control power transferring between phases. Simulation results have been carried out to verify the performance of the proposed SSBC circuit of uniform three-phase SOC balancing

ANALYSIS AND OPTIMIZATION OF ELECTRICAL SYSTEMS IN A SOLAR CAR WITH APPLICATIONS TO GATO DEL SOL III-IV

Gato del Sol III, was powered by a solar array of 480 Silicon mono-crystalline photovoltaic cells. Maximum Power Point trackers efficiently made use of these cells and tracked the optimal load. The cells were mounted on a fiber glass and foam core composite shell. The shell rides on a lightweight aluminum space frame chassis, which is powered by a 95% efficient brushless DC motor. Gato del Sol IV was the University of Kentucky Solar Car Team’s (UKSCT) entry into the American Solar Car Challenge (ASC) 2010 event. The car makes use of 310 high density lithium-polymer batteries to account for a 5 kWh pack, enough to travel over 75 miles at 40 mph without power generated by the array. An in-house battery protection system and charge balancing system ensure safe and efficient use of the batteries. Various electrical sub-systems on the car communicate among each other via Controller Area Network (CAN). This real time data is then transmitted to an external computer via RF communication for data collection

Modelling of Multi Inductor based Balancing of Battery Pack for Electrical Mobility

   The pre requisite for success of electrical mobility is driven by development of battery technologies. Reliable performance of electrical mobility necessitates for high energy density battery packs. The advent of Li ion cell chemistry revolutionised the electric and hybrid vehicle advancement due to its high energy density, lighter weight and wide range of temperature performance. Higher operating voltages of the battery are achieved by configuration of the cells in series and parallel combinations. The performance of these battery packs are affected by operating temperature and imperfections in manufacturability which causes mismatches in cell impedance, cell potential and state of charge (SOC) imbalance. These performance issues are overcome by cell and battery balancing techniques. In this paper, a dynamic battery pack balancing circuit by using multi inductor with SOC based logic controller for both cell and battery balancing are presented. The battery pack balancing performances during static, charging, discharging conditions are analysed

Automotive Battery Equalizers Based on Joint Switched-Capacitor and Buck-Boost Converters

A series of integrated equalizers based on joint buck-boost (BB) and switched-capacitor (SC) converters are proposed for balancing the voltages of series-connected battery packs. All these equalizers realize the any-cells-to-any-cells (AC2AC) equalization mode without increasing the count of MOSFETs and drivers. Corresponding operational principles are analyzed and the expressions of balancing currents are derived by analytical methods and verified by experimental waveforms. According to the comparative balancing experiments for four and six series-connected Li-ion cells, one proposed CBB-PCSC equalizer, which achieves the dual AC2AC balancing modes through the integration of both coupled buck-boost (CBB) and parallel-connected switched-capacitor (PCSC) converters, leads to the highest balancing speed and efficiency. Moreover, compared with several conventional equalizers, this CBB-PCSC topology also has the compact size and low cost, making it become a well-performing integrated topology for automotive battery voltages equalization

Power Quality Enhancement in Electricity Grids with Wind Energy Using Multicell Converters and Energy Storage

In recent years, the wind power industry is experiencing a rapid growth and more wind farms with larger size wind turbines are being connected to the power system. While this contributes to the overall security of electricity supply, large-scale deployment of wind energy into the grid also presents many technical challenges. Most of these challenges are one way or another, related to the variability and intermittent nature of wind and affect the power quality of the distribution grid. Power quality relates to factors that cause variations in the voltage level and frequency as well as distortion in the voltage and current waveforms due to wind variability which produces both harmonics and inter-harmonics. The main motivation behind work is to propose a new topology of the static AC/DC/AC multicell converter to improve the power quality in grid-connected wind energy conversion systems. Serial switching cells have the ability to achieve a high power with lower-size components and improve the voltage waveforms at the input and output of the converter by increasing the number of cells. Furthermore, a battery energy storage system is included and a power management strategy is designed to ensure the continuity of power supply and consequently the autonomy of the proposed system. The simulation results are presented for a 149.2 kW wind turbine induction generator system and the results obtained demonstrate the reduced harmonics, improved transient response, and reference tracking of the voltage output of the wind energy conversion system.Peer reviewedFinal Accepted Versio