Statistical modelling of nano CMOS transistors with surface potential compact model PSP

The development of a statistical compact model strategy for nano-scale CMOS transistors is presented in this thesis. Statistical variability which arises from the discreteness of charge and granularity of matter plays an important role in scaling of nano CMOS transistors especially in sub 50nm technology nodes. In order to achieve reasonable performance and yield in contemporary CMOS designs, the statistical variability that affects the circuit/system performance and yield must be accurately represented by the industry standard compact models. As a starting point, predictive 3D simulation of an ensemble of 1000 microscopically different 35nm gate length transistors is carried out to characterize the impact of statistical variability on the device characteristics. PSP, an advanced surface potential compact model that is selected as the next generation industry standard compact model, is targeted in this study. There are two challenges in development of a statistical compact model strategy. The first challenge is related to the selection of a small subset of statistical compact model parameters from the large number of compact model parameters. We propose a strategy to select 7 parameters from PSP to capture the impact of statistical variability on current-voltage characteristics. These 7 parameters are used in statistical parameter extraction with an average RMS error of less than 2.5% crossing the whole operation region of the simulated transistors. Moreover, the accuracy of statistical compact model extraction strategy in reproducing the MOSFET electrical figures of merit is studied in detail. The results of the statistical compact model extraction are used for statistical circuit simulation of a CMOS inverter under different input-output conditions and different number of statistical parameters. The second challenge in the development of statistical compact model strategy is associated with statistical generation of parameters preserving the distribution and correlation of the directly extracted parameters. By using advanced statistical methods such as principal component analysis and nonlinear power method, the accuracy of parameter generation is evaluated and compared to directly extracted parameter sets. Finally, an extension of the PSP statistical compact model strategy to different channel width/length devices is presented. The statistical trends of parameters and figures of merit versus channel width/length are characterized

Design and modelling of variability tolerant on-chip communication structures for future high performance system on chip designs

The incessant technology scaling has enabled the integration of functionally complex System-on-Chip (SoC) designs with a large number of heterogeneous systems on a single chip. The processing elements on these chips are integrated through on-chip communication structures which provide the infrastructure necessary for the exchange of data and control signals, while meeting the strenuous physical and design constraints. The use of vast amounts of on chip communications will be central to future designs where variability is an inherent characteristic. For this reason, in this thesis we investigate the performance and variability tolerance of typical on-chip communication structures. Understanding of the relationship between variability and communication is paramount for the designers; i.e. to devise new methods and techniques for designing performance and power efficient communication circuits in the forefront of challenges presented by deep sub-micron (DSM) technologies. The initial part of this work investigates the impact of device variability due to Random Dopant Fluctuations (RDF) on the timing characteristics of basic communication elements. The characterization data so obtained can be used to estimate the performance and failure probability of simple links through the methodology proposed in this work. For the Statistical Static Timing Analysis (SSTA) of larger circuits, a method for accurate estimation of the probability density functions of different circuit parameters is proposed. Moreover, its significance on pipelined circuits is highlighted. Power and area are one of the most important design metrics for any integrated circuit (IC) design. This thesis emphasises the consideration of communication reliability while optimizing for power and area. A methodology has been proposed for the simultaneous optimization of performance, area, power and delay variability for a repeater inserted interconnect. Similarly for multi-bit parallel links, bandwidth driven optimizations have also been performed. Power and area efficient semi-serial links, less vulnerable to delay variations than the corresponding fully parallel links are introduced. Furthermore, due to technology scaling, the coupling noise between the link lines has become an important issue. With ever decreasing supply voltages, and the corresponding reduction in noise margins, severe challenges are introduced for performing timing verification in the presence of variability. For this reason an accurate model for crosstalk noise in an interconnection as a function of time and skew is introduced in this work. This model can be used for the identification of skew condition that gives maximum delay noise, and also for efficient design verification

AI/ML Algorithms and Applications in VLSI Design and Technology

An evident challenge ahead for the integrated circuit (IC) industry in the nanometer regime is the investigation and development of methods that can reduce the design complexity ensuing from growing process variations and curtail the turnaround time of chip manufacturing. Conventional methodologies employed for such tasks are largely manual; thus, time-consuming and resource-intensive. In contrast, the unique learning strategies of artificial intelligence (AI) provide numerous exciting automated approaches for handling complex and data-intensive tasks in very-large-scale integration (VLSI) design and testing. Employing AI and machine learning (ML) algorithms in VLSI design and manufacturing reduces the time and effort for understanding and processing the data within and across different abstraction levels via automated learning algorithms. It, in turn, improves the IC yield and reduces the manufacturing turnaround time. This paper thoroughly reviews the AI/ML automated approaches introduced in the past towards VLSI design and manufacturing. Moreover, we discuss the scope of AI/ML applications in the future at various abstraction levels to revolutionize the field of VLSI design, aiming for high-speed, highly intelligent, and efficient implementations

Hybrid Gate-Level Leakage Model for Monte Carlo Analysis on Multiple GPUs

This paper proposes a hybrid gate-level leakage model for the use with the Monte Carlo (MC) analysis approach, which combines a lookup table (LUT) model with a first-order exponential-polynomial model (first-order model, herein). For the process parameters having strong nonlinear relationships with the logarithm of leakage current, the proposed model uses the LUT approach for the sake of modeling accuracy. For the other process parameters, it uses the first-order model for increased efficiency. During the library characterization for each type of logic gates, the proposed approach determines the process parameters for which it will use the LUT model. And, it determines the number of LUT data points, which can maximize analysis efficiency with acceptable accuracy, based on the user-defined threshold. The proposed model was implemented for gate-level MC leakage analysis using three graphic processing units. In experiments, the proposed approach exhibited the average errors of <5% in both mean and standard deviation with reference to SPICE-level MC leakage analysis. In comparison, MC analysis with the first-order model exhibited more than 90% errors. In CPU times, the proposed hybrid approach took only two to five times longer runtimes. In comparison with the full LUT model, the proposed hybrid model was up to one hundred times faster while increasing the average errors by only 3%. Finally, the proposed approach completed a leakage analysis of an OpenSparc T2 core of 4.5 million gates with a runtime of <5 min.1150Ysciescopu

Total Dose Simulation for High Reliability Electronics

abstract: New technologies enable the exploration of space, high-fidelity defense systems, lighting fast intercontinental communication systems as well as medical technologies that extend and improve patient lives. The basis for these technologies is high reliability electronics devised to meet stringent design goals and to operate consistently for many years deployed in the field. An on-going concern for engineers is the consequences of ionizing radiation exposure, specifically total dose effects. For many of the different applications, there is a likelihood of exposure to radiation, which can result in device degradation and potentially failure. While the total dose effects and the resulting degradation are a well-studied field and methodologies to help mitigate degradation have been developed, there is still a need for simulation techniques to help designers understand total dose effects within their design. To that end, the work presented here details simulation techniques to analyze as well as predict the total dose response of a circuit. In this dissertation the total dose effects are broken into two sub-categories, intra-device and inter-device effects in CMOS technology. Intra-device effects degrade the performance of both n-channel and p-channel transistors, while inter-device effects result in loss of device isolation. In this work, multiple case studies are presented for which total dose degradation is of concern. Through the simulation techniques, the individual device and circuit responses are modeled post-irradiation. The use of these simulation techniques by circuit designers allow predictive simulation of total dose effects, allowing focused design changes to be implemented to increase radiation tolerance of high reliability electronics.Dissertation/ThesisPh.D. Electrical Engineering 201

Oxygen-insertion Technology for CMOS Performance Enhancement

Until 2003, the semiconductor industry followed Dennard scaling rules to improve complementary metal-oxide-semiconductor (CMOS) transistor performance. However, performance gains with further reductions in transistor gate length are limited by physical effects that do not scale commensurately with device dimensions: short-channel effects (SCE) due to gate-leakage-limited gate-oxide thickness scaling, channel mobility degradation due to enhanced vertical electric fields, increased parasitic resistances due to reductions in source/drain (S/D) contact area, and increased variability in transistor performance due to random dopant fluctuation (RDF) effects and gate work function variations (WFV). These emerging scaling issues, together with increased process complexity and cost, pose severe challenges to maintaining the exponential scaling of transistor dimensions. This dissertation discusses the benefits of oxygen-insertion (OI) technology, a CMOS performance booster, for overcoming these challenges. The benefit of OI technology to mitigate the increase in sheet resistance ($R_{sh}$) with decreasing junction depth ($X_J$) for ultra-shallow-junctions (USJs) relevant for deep-sub-micron planar CMOS transistors is assessed through the fabrication of $R_{sh}$ test structures, electrical characterization, and technology computer-aided design (TCAD) simulations. Experimental and secondary ion mass spectroscopy (SIMS) analyses indicate that OI technology can facilitate low-resistivity USJ formation by reducing $R_{sh}$ and $X_J$ due to retarded transient-enhanced-diffusion (TED) effects and enhanced dopant retention during post-implantation thermal annealing. It is also shown that a low-temperature-oxide (LTO) capping can increase $R_{sh}$ unfavorably due to lower dopant activation levels, which can be alleviated by OI technology. This dissertation extends the evaluation of OI technology to advanced FinFET technology, targeting 7/8-nm low power technology node. A bulk-Si FinFET design comprising a super-steep retrograde (SSR) fin channel doping profile achievable with OI technology is studied by three-dimensional (3-D) TCAD simulations. As compared with the conventional bulk-Si (control) FinFET design with a heavily-doped fin channel doping profile, SSR FinFETs can achieve higher $I_{on}/I_{off}$ ratios and reduce the sensitivity of device performance to variations due to the lightly doped fin channel. As compared with the SOI FinFET design, SSR FinFETs can achieve similarly low $V_{DD,min}$ for 6T-SRAM cell yield estimation. Both SSR and SOI design can provide for as much as 100 mV reduction in $V_{DD,min}$ compared with the control FinFET design. Overall, the SSR FinFET design that can be achieved with OI technology is demonstrated to be a cheaper alternative to the SOI FinFET technology for extending CMOS scaling beyond the 10-nm node. Finally, this dissertation investigates the benefits of OI technology for reducing the Schottky barrier height ($\Phi_{Bp}$) of a Pt/Ti/p-type Si metal-semiconductor (M/S) contact, which can be expected to help reduce the specific contact resistivity for a p-type silicon contact. Electrical measurements of back-to-back Schottky diodes, SIMS, and X-ray photoelectron spectroscopy (XPS) show that the reduction in $\Phi_{Bp}$ is associated with enhanced Ti 2p and Si 2p core energy level shifts. OI technology is shown to favor low-$\Phi_{Bp}$ Pt monosilicide formation during forming gas anneal (FGA) by suppressing the grain boundary diffusion of Pt atoms into the crystalline Si substrate

Understanding the Potential and Limitations of Tunnel FETs for Low-Voltage Analog/Mixed-Signal Circuits

In this paper, the analog/mixed-signal performance is evaluated at device and circuit levels for a III-V nanowire tunnel field effect transistor (TFET) technology platform and compared against the predictive model for FinFETs at the 10-nm technology node. The advantages and limits of TFETs over their FinFET counterparts are discussed in detail, considering the main analog figures of merits, as well as the implementation of low-voltage track and-hold (T/H) and comparator circuits. It is found that the higher output resistance offered by TFET-based designs allows achieving significantly higher intrinsic voltage gain and higher maximum-oscillation frequency at low current levels. TFET-based T/H circuits have better accuracy and better hold performance by using the dummy switch solution for the mitigation of the charge injection. Among the comparator circuits, the TFET-based conventional dynamic architecture exhibits the best performance while keeping lower area occupation with respect to the more complex double-tail circuits. Moreover, it outperforms all the FinFET counterparts over a wide range of supply voltage when considering low values of the common-mode voltage

Simulation study of scaling design, performance characterization, statistical variability and reliability of decananometer MOSFETs

This thesis describes a comprehensive, simulation based scaling study – including device design, performance characterization, and the impact of statistical variability – on deca-nanometer bulk MOSFETs. After careful calibration of fabrication processes and electrical characteristics for n- and p-MOSFETs with 35 nm physical gate length, 1 nm EOT and stress engineering, the simulated devices closely match the performance of contemporary 45 nm CMOS technologies. Scaling to 25 nm, 18 nm and 13 nm gate length n and p devices follows generalized scaling rules, augmented by physically realistic constraints and the introduction of high-k/metal-gate stacks. The scaled devices attain the performance stipulated by the ITRS. Device a.c. performance is analyzed, at device and circuit level. Extrinsic parasitics become critical to nano-CMOS device performance. The thesis describes device capacitance components, analyzes the CMOS inverter, and obtains new insights into the inverter propagation delay in nano-CMOS. The projection of a.c. performance of scaled devices is obtained. The statistical variability of electrical characteristics, due to intrinsic parameter fluctuation sources, in contemporary and scaled decananometer MOSFETs is systematically investigated for the first time. The statistical variability sources: random discrete dopants, gate line edge roughness and poly-silicon granularity are simulated, in combination, in an ensemble of microscopically different devices. An increasing trend in the standard deviation of the threshold voltage as a function of scaling is observed. The introduction of high-k/metal gates improves electrostatic integrity and slows this trend. Statistical evaluations of variability in Ion and Ioff as a function of scaling are also performed. For the first time, the impact of strain on statistical variability is studied. Gate line edge roughness results in areas of local channel shortening, accompanied by locally increased strain, both effects increasing the local current. Variations are observed in both the drive current, and in the drive current enhancement normally expected from the application of strain. In addition, the effects of shallow trench isolation (STI) on MOSFET performance and on its statistical variability are investigated for the first time. The inverse-narrow-width effect of STI enhances the current density adjacent to it. This leads to a local enhancement of the influence of junction shapes adjacent to the STI. There is also a statistical impact on the threshold voltage due to random STI induced traps at the silicon/oxide interface