16 research outputs found

    Security aspects of communications in VANETs

    Get PDF
    The Fourth Industrial Revolution has begun and it promises breakthroughs in Artificial Intelligence, robotics, Machine Learning, Internet of Things, Digital Twin, and many other technologies that tackle advancements in the industries. The trend is headed towards automation and connectivity. In the automotive industry, advancements have been made towards integrating autonomous driving vehicles into Intelligent Transport Systems (ITS) with the use of Vehicular Ad-Hoc Networks (VANETs). The purpose of this type of network is to enable efficient communication between vehicles (V2V communication) or vehicles and infrastructure (V2I communication), to improve driving safety, to avoid traffic congestion, and to better coordinate transport networks. This direction towards limited (or lack of) human intervention implies vulnerability to cyber attacks. In this context, this paper provides a comprehensive classification of related state-of-the-art approaches following three key directions: 1) privacy, 2) authentication and 3) message integrity within VANETs. Discussions, challenges and open issues faced by the current and next generation of vehicular networks are also provided

    Enhancing quality-of-service conditions using a cross-layer paradigm for ad-hoc vehicular communication

    Get PDF
    The Internet of Vehicles (IoVs) is an emerging paradigm aiming to introduce a plethora of innovative applications and services that impose a certain quality of service (QoS) requirements. The IoV mainly relies on vehicular ad-hoc networks (VANETs) for autonomous inter-vehicle communication and road-traffic safety management. With the ever-increasing demand to design new and emerging applications for VANETs, one challenge that continues to stand out is the provision of acceptable QoS requirements to particular user applications. Most existing solutions to this challenge rely on a single layer of the protocol stack. This paper presents a cross-layer decision-based routing protocol that necessitates choosing the best multi-hop path for packet delivery to meet acceptable QoS requirements. The proposed protocol acquires the information about the channel rate from the physical layer and incorporates this information in decision making, while directing traffic at the network layer level. Key performance metrics for the system design are analyzed using extensive experimental simulation scenarios. In addition, three data rate variant solutions are proposed to cater for various application-specific requirements in highways and urban environments. © 2013 IEEE

    Security aspects of communications in VANETs

    Get PDF
    The Fourth Industrial Revolution has begun and it promises breakthroughs in Artificial Intelligence, robotics, Machine Learning, Internet of Things, Digital Twin, and many other technologies that tackle advancements in the industries. The trend is headed towards automation and connectivity. In the automotive industry, advancements have been made towards integrating autonomous driving vehicles into Intelligent Transport Systems (ITS) with the use of Vehicular Ad-Hoc Networks (VANETs). The purpose of this type of network is to enable efficient communication between vehicles (V2V communication) or vehicles and infrastructure (V2I communication), to improve driving safety, to avoid traffic congestion, and to better coordinate transport networks. This direction towards limited (or lack of) human intervention implies vulnerability to cyber attacks. In this context, this paper provides a comprehensive classification of related state-of-the-art approaches following three key directions: 1) privacy, 2) authentication and 3) message integrity within VANETs. Discussions, challenges and open issues faced by the current and next generation of vehicular networks are also provided

    SNAP : A Software-Defined & Named-Data Oriented Publish-Subscribe Framework for Emerging Wireless Application Systems

    Get PDF
    The evolution of Cyber-Physical Systems (CPSs) has given rise to an emergent class of CPSs defined by ad-hoc wireless connectivity, mobility, and resource constraints in computation, memory, communications, and battery power. These systems are expected to fulfill essential roles in critical infrastructure sectors. Vehicular Ad-Hoc Network (VANET) and a swarm of Unmanned Aerial Vehicles (UAV swarm) are examples of such systems. The significant utility of these systems, coupled with their economic viability, is a crucial indicator of their anticipated growth in the future. Typically, the tasks assigned to these systems have strict Quality-of-Service (QoS) requirements and require sensing, perception, and analysis of a substantial amount of data. To fulfill these QoS requirements, the system requires network connectivity, data dissemination, and data analysis methods that can operate well within a system\u27s limitations. Traditional Internet protocols and methods for network connectivity and data dissemination are typically designed for well-engineering cyber systems and do not comprehensively support this new breed of emerging systems. The imminent growth of these CPSs presents an opportunity to develop broadly applicable methods that can meet the stated system requirements for a diverse range of systems and integrate these systems with the Internet. These methods could potentially be standardized to achieve interoperability among various systems of the future. This work presents a solution that can fulfill the communication and data dissemination requirements of a broad class of emergent CPSs. The two main contributions of this work are the Application System (APPSYS) system abstraction, and a complementary communications framework called the Software-Defined NAmed-data enabled Publish-Subscribe (SNAP) communication framework. An APPSYS is a new breed of Internet application representing the mobile and resource-constrained CPSs supporting data-intensive and QoS-sensitive safety-critical tasks, referred to as the APPSYS\u27s mission. The functioning of the APPSYS is closely aligned with the needs of the mission. The standard APPSYS architecture is distributed and partitions the system into multiple clusters where each cluster is a hierarchical sub-network. The SNAP communication framework within the APPSYS utilized principles of Information-Centric Networking (ICN) through the publish-subscribe communication paradigm. It further extends the role of brokers within the publish-subscribe paradigm to create a distributed software-defined control plane. The SNAP framework leverages the APPSYS design characteristics to provide flexible and robust communication and dynamic and distributed control-plane decision-making that successfully allows the APPSYS to meet the communication requirements of data-oriented and QoS-sensitive missions. In this work, we present the design, implementation, and performance evaluation of an APPSYS through an exemplar UAV swarm APPSYS. We evaluate the benefits offered by the APPSYS design and the SNAP communication framework in meeting the dynamically changed requirements of a data-intensive and QoS-sensitive Coordinated Search and Tracking (CSAT) mission operating in a UAV swarm APPSYS on the battlefield. Results from the performance evaluation demonstrate that the UAV swarm APPSYS successfully monitors and mitigates network impairment impacting a mission\u27s QoS to support the mission\u27s QoS requirements

    Estudo do IPFS como protocolo de distribuição de conteúdos em redes veiculares

    Get PDF
    Over the last few years, vehicular ad-hoc networks (VANETs) have been the focus of great progress due to the interest in autonomous vehicles and in distributing content not only between vehicles, but also to the Cloud. Performing a download/upload to/from a vehicle typically requires the existence of a cellular connection, but the costs associated with mobile data transfers in hundreds or thousands of vehicles quickly become prohibitive. A VANET allows the costs to be several orders of magnitude lower - while keeping the same large volumes of data - because it is strongly based in the communication between vehicles (nodes of the network) and the infrastructure. The InterPlanetary File System (IPFS) is a protocol for storing and distributing content, where information is addressed by its content, instead of its location. It was created in 2014 and it seeks to connect all computing devices with the same system of files, comparable to a BitTorrent swarm exchanging Git objects. It has been tested and deployed in wired networks, but never in an environment where nodes have intermittent connectivity, such as a VANET. This work focuses on understanding IPFS, how/if it can be applied to the vehicular network context, and comparing it with other content distribution protocols. In this dissertation, IPFS has been tested in a small and controlled network to understand its working applicability to VANETs. Issues such as neighbor discoverability times and poor hashing performance have been addressed. To compare IPFS with other protocols (such as Veniam’s proprietary solution or BitTorrent) in a relevant way and in a large scale, an emulation platform was created. The tests in this emulator were performed in different times of the day, with a variable number of files and file sizes. Emulated results show that IPFS is on par with Veniam’s custom V2V protocol built specifically for V2V, and greatly outperforms BitTorrent regarding neighbor discoverability and data transfers. An analysis of IPFS’ performance in a real scenario was also conducted, using a subset of STCP’s vehicular network in Oporto, with the support of Veniam. Results from these tests show that IPFS can be used as a content dissemination protocol, showing it is up to the challenge provided by a constantly changing network topology, and achieving throughputs up to 2.8 MB/s, values similar or in some cases even better than Veniam’s proprietary solution.Nos últimos anos, as redes veiculares (VANETs) têm sido o foco de grandes avanços devido ao interesse em veículos autónomos e em distribuir conteúdos, não só entre veículos mas também para a "nuvem" (Cloud). Tipicamente, fazer um download/upload de/para um veículo exige a utilização de uma ligação celular (SIM), mas os custos associados a fazer transferências com dados móveis em centenas ou milhares de veículos rapidamente se tornam proibitivos. Uma VANET permite que estes custos sejam consideravelmente inferiores - mantendo o mesmo volume de dados - pois é fortemente baseada na comunicação entre veículos (nós da rede) e a infraestrutura. O InterPlanetary File System (IPFS - "sistema de ficheiros interplanetário") é um protocolo de armazenamento e distribuição de conteúdos, onde a informação é endereçada pelo conteúdo, em vez da sua localização. Foi criado em 2014 e tem como objetivo ligar todos os dispositivos de computação num só sistema de ficheiros, comparável a um swarm BitTorrent a trocar objetos Git. Já foi testado e usado em redes com fios, mas nunca num ambiente onde os nós têm conetividade intermitente, tal como numa VANET. Este trabalho tem como foco perceber o IPFS, como/se pode ser aplicado ao contexto de rede veicular e compará-lo a outros protocolos de distribuição de conteúdos. Numa primeira fase o IPFS foi testado numa pequena rede controlada, de forma a perceber a sua aplicabilidade às VANETs, e resolver os seus primeiros problemas como os tempos elevados de descoberta de vizinhos e o fraco desempenho de hashing. De modo a poder comparar o IPFS com outros protocolos (tais como a solução proprietária da Veniam ou o BitTorrent) de forma relevante e em grande escala, foi criada uma plataforma de emulação. Os testes neste emulador foram efetuados usando registos de mobilidade e conetividade veicular de alturas diferentes de um dia, com um número variável de ficheiros e tamanhos de ficheiros. Os resultados destes testes mostram que o IPFS está a par do protocolo V2V da Veniam (desenvolvido especificamente para V2V e VANETs), e que o IPFS é significativamente melhor que o BitTorrent no que toca ao tempo de descoberta de vizinhos e transferência de informação. Uma análise do desempenho do IPFS em cenário real também foi efetuada, usando um pequeno conjunto de nós da rede veicular da STCP no Porto, com o apoio da Veniam. Os resultados destes testes demonstram que o IPFS pode ser usado como protocolo de disseminação de conteúdos numa VANET, mostrando-se adequado a uma topologia constantemente sob alteração, e alcançando débitos até 2.8 MB/s, valores parecidos ou nalguns casos superiores aos do protocolo proprietário da Veniam.Mestrado em Engenharia de Computadores e Telemátic

    Adaptive Data Transmission Control for Spatio-temporal Data Retention over Crowds of Vehicles

    Get PDF
    Some specific services for Internet of Things, such as real-time map and providing local weather information, depend strongly on geographical time and location. We refer to the data for such service as spatio-temporal data (STD). When STD is used in a query response system similar to conventional Internet services, users not only need to acquire data actively as required, they must also have functions for retrieving data available STD. Therefore, we propose an STD retention system that uses vehicles as information hubs (InfoHubs) for disseminating and retaining the data in a specific area. In our system, InfoHubs diffuse, maintain, and advertise STD over places and times where the STD are strongly dependent, thereby allowing users to receive such data passively within the specific area. Additionally, because STD are associated with a particular space, the system can reduce search costs. We also propose an adaptive transmission control method that each vehicle effectively operates its wireless resources autonomously and STD are retained and distributed efficiently. Finally, we evaluated our proposed method using simulations and clarified that our proposed system is capable of achieving a coverage rate of nearly 100% for STD while reducing the number of data transmissions compared to existing systems

    A Secure and Distributed Architecture for Vehicular Cloud and Protocols for Privacy-preserving Message Dissemination in Vehicular Ad Hoc Networks

    Get PDF
    Given the enormous interest in self-driving cars, Vehicular Ad hoc NETworks (VANETs) are likely to be widely deployed in the near future. Cloud computing is also gaining widespread deployment. Marriage between cloud computing and VANETs would help solve many of the needs of drivers, law enforcement agencies, traffic management, etc. The contributions of this dissertation are summarized as follows: A Secure and Distributed Architecture for Vehicular Cloud: Ensuring security and privacy is an important issue in the vehicular cloud; if information exchanged between entities is modified by a malicious vehicle, serious consequences such as traffic congestion and accidents can occur. In addition, sensitive data could be lost, and human lives also could be in danger. Hence, messages sent by vehicles must be authenticated and securely delivered to vehicles in the appropriate regions. In this dissertation, we present a secure and distributed architecture for the vehicular cloud which uses the capabilities of vehicles to provide various services such as parking management, accident alert, traffic updates, cooperative driving, etc. Our architecture ensures the privacy of vehicles and supports secure message dissemination using the vehicular infrastructure. A Low-Overhead Message Authentication and Secure Message Dissemination Scheme for VANETs: Efficient, authenticated message dissemination in VANETs are important for the timely delivery of authentic messages to vehicles in appropriate regions in the VANET. Many of the approaches proposed in the literature use Road Side Units (RSUs) to collect events (such as accidents, weather conditions, etc.) observed by vehicles in its region, authenticate them, and disseminate them to vehicles in appropriate regions. However, as the number of messages received by RSUs increases in the network, the computation and communication overhead for RSUs related to message authentication and dissemination also increases. We address this issue and present a low-overhead message authentication and dissemination scheme in this dissertation. On-Board Hardware Implementation in VANET: Design and Experimental Evaluation: Information collected by On Board Units (OBUs) located in vehicles can help in avoiding congestion, provide useful information to drivers, etc. However, not all drivers on the roads can benefit from OBU implementation because OBU is currently not available in all car models. Therefore, in this dissertation, we designed and built a hardware implementation for OBU that allows the dissemination of messages in VANET. This OBU implementation is simple, efficient, and low-cost. In addition, we present an On-Board hardware implementation of Ad hoc On-Demand Distance Vector (AODV) routing protocol for VANETs. Privacy-preserving approach for collection and dissemination of messages in VANETs: Several existing schemes need to consider safety message collection in areas where the density of vehicles is low and roadside infrastructure is sparse. These areas could also have hazardous road conditions and may have poor connectivity. In this dissertation, we present an improved method for securely collecting and disseminating safety messages in such areas which preserves the privacy of vehicles. We propose installing fixed OBUs along the roadside of dangerous roads (i.e., roads that are likely to have more ice, accidents, etc., but have a low density of vehicles and roadside infrastructure) to help collect data about the surrounding environment. This would help vehicles to be notified about the events on such roads (such as ice, accidents, etc.).Furthermore, to enhance the privacy of vehicles, our scheme allows vehicles to change their pseudo IDs in all traffic conditions. Therefore, regardless of whether the number of vehicles is low in the RSU or Group Leader GL region, it would be hard for an attacker to know the actual number of vehicles in the RSU/GL region

    Exploring intelligent service migration in a highly mobile network

    Get PDF
    Mobile services allow services to be migrated or replicated closer to users as they move around. This is now regarded as a viable mechanism to provide good Quality of Service to users in highly mobile environments such as vehicular networks. The vehicular environment is rapidly becoming a significant part of the internet and this presents various challenges that must be addressed; this is due to continuous handovers as mobile devices change their point of attachment to these networks resulting in a loss of service. Therefore, this explains the need to build a framework for intelligent service migration. This thesis addresses these issues. It starts by discussing the requirements for intelligent service migration. Then it investigates a low latency Quality of Service Aware Framework as well as an experimental transport protocol that would be favoured by vehicular networks. Furthermore, two analytical models are developed using the Zero-Server Markov Chain technique which is a way of analysing scenarios when the server is not continuously available to serve. Using the Zero-Server Markov Chain, the first analytical model looks at lost service due to continuous handovers and the communication dynamics of vehicular networks, while the second model analyses how service migration affects service delivery in these networks. Formulas are developed to yield the average number of packets in the system, the response time, the probability of blocking and a new parameter called the probability of lost service. These formulas are then applied to the Middlesex VANET Testbed to look at reactive and proactive service migration. These techniques are then incorporated into a new Service Management Framework to provide sustainable Quality of Service and Quality of Experience to mobile users in vehicular networks. This thesis also shows that this new approach is better than current approaches as it addresses key issues in intelligent service migration in such environments, and hence can play a significant part in the development of Intelligent Transport Systems for Smart Cities

    Dissemination of contextual information for assisted driving

    Get PDF
    Mestrado em Engenharia Electrónica e TelecomunicaçõesDriver assistance systems can be used to improve road and car safety, reduce driving fatigue and provide a more e cient driving experience. An important part of these systems is the communication between vehicles, and vehicle-to-infrastructure communication. This work presents mechanisms enabling driving support, exploring the vehicular network to provide information about the drivers neighborhood. The network is composed by vehicles, tra c signals and xed stations along the road. Each car is equipped with a recording camera, a GPS receiver, as well as communication modules such as WiFi, WAVE and 3G/4G, allowing the exchange of data between the various nodes. The data exchanged is composed by positional data of neighboring vehicles, sensor information from tra c signals and video images incoming from other vehicles. This data is used to facilitate the driver in decision making, but can also provide an overview of the tra c density in the neighborhood. The tra c signals broadcast their position and if they are dynamic (such as tra c lights), their status is also transmitted. The xed stations are equipped with numerous sensors and are used to provide environmental data. The driver can access all the collected data via visual information, on a display screen that contains a map of the neighborhood along with the information available of the nearby nodes. The proposed system is evaluated through real vehicular experiments in two distinct scenarios: urban and highway. The results show that the communication delay is higher in the highway scenario, mainly due to the distance between vehicles and travelling speeds. However, promising results regarding the maximum delay and the average number of retransmissions foresee important inputs for future services of assisted-driving, in general, and carovertaking assistance, in particular.Os sistemas de condução assistida podem ser utilizados para melhorar a segurança rodoviária e automóvel, reduzir a fadiga da condução e proporcionar uma experiência de condução mais e ciente. Uma parte importante desses sistemas e a comunicação entre veículos e comunicação veiculo infraestrutura. Este trabalho propõe mecanismos que permitem o suporte a condução, explorando a rede de veicular para fornecer informações sobre a vizinhança do condutor. A rede e composta por veículos, sinais de transito e estações fixas ao longo da estrada. Cada carro esta equipado com uma camera de gravação, um receptor GPS, bem como módulos de comunicação, como WiFi, WAVE e 3G/4G, permitindo a troca de dados entre os vários nos. Os dados trocados são compostos por dados posicionais de veículos vizinhos, informações sensoriais de sinais de trânsito e imagens de vídeo provenientes de outros veículos. Esses dados s~ao usados para facilitar a tomada de decisões, mas também podem fornecer uma vis~ao geral da densidade de tráfego na vizinhança. Os sinais de transito transmitem a sua posição e, no caso de serem dinâmicos (como semáforos), o seu estado actual também e transmitido. As estações fixas estão equipadas com vários sensores e sao usadas para fornecer dados ambientais. O condutor pode aceder a todos os dados recolhidos através de informações visuais, num ecrã que contém um mapa da sua redondeza junto com a informação disponível dos nos vizinhos. O sistema proposto e avaliado através de testes reais em dois cenários distintos: urbano e auto-estrada. Os resultados mostram que o atraso da comunicação e maior no cenário da auto-estrada, principalmente devido as maiores distancias entre os veículos e as velocidades mais elevadas. No entanto, resultados promissores em relação ao atraso máximo e ao numero médio de retransmissões prevêem contribuições importantes para serviços futuros de condução assistida em geral, e assistência de ultrapassagem de veículos, em particular
    corecore