Low-Capture-Power Test Generation for Scan-Based At-Speed Testing

Scan-based at-speed testing is a key technology to guarantee timing-related test quality in the deep submicron era. However, its applicability is being severely challenged since significant yield loss may occur from circuit malfunction due to excessive IR drop caused by high power dissipation when a test response is captured. This paper addresses this critical problem with a novel low-capture-power X-filling method of assigning 0\u27s and 1\u27s to unspecified (X) bits in a test cube obtained during ATPG. This method reduces the circuit switching activity in capture mode and can be easily incorporated into any test generation flow to achieve capture power reduction without any area, timing, or fault coverage impact. Test vectors generated with this practical method greatly improve the applicability of scan-based at-speed testing by reducing the risk of test yield lossIEEE International Conference on Test, 2005, 8 November 2005, Austin, TX, US

Efficient Test Set Modification for Capture Power Reduction

The occurrence of high switching activity when the response to a test vector is captured by flipflops in scan testing may cause excessive IR drop, resulting in significant test-induced yield loss. This paper addresses the problem with a novel method based on test set modification, featuring (1) a new constrained X-identification technique that turns a properly selected set of bits in a fullyspecified test set into X-bits without fault coverage loss, and (2) a new LCP (low capture power) X-filling technique that optimally assigns 0’s and 1’s to the X-bits for the purpose of reducing the switching activity of the resulting test set in capture mode. This method can be readily applied in any test generation flow for capture power reduction without any impact on area, timing, test set size, and fault coverage

An Efficient Algorithm to Selectively Gate Scan Cells for Capture Power Reduction

[[abstract]]Recently, power dissipation in full-scan testing has brought a great challenge for test engineers. In addition to shift power reduction, excessive switching activity during capture operation may lead to circuit malfunction and yield loss. In this paper, a new algorithm is proposed with using clock gating technique on a part of the scan cells to prevent the internal circuit from unnecessary transitions. These scan cells are divided into several exclusive scan groups. For each test vector, only a portion of the scan groups are activated to store the test response per capture cycle. The proposed method can reduce the capture power dissipation without any influence on fault coverage or testing time. Experimental results for ISCAS'89 benchmark circuits show that the capture power reduction in test sequence can up to 55%.[[notice]]補正完畢[[incitationindex]]EI[[booktype]]紙

A comparison of classical scheduling approaches in power-constrained block-test scheduling

Classical scheduling approaches are applied here to overcome the problem of unequal-length block-test scheduling under power dissipation constraints. List scheduling-like approaches are proposed first as greedy algorithms to tackle the fore mentioned problem. Then, distribution-graph based approaches are described in order to achieve balanced test concurrency and test power dissipation. An extended tree growing technique is also used in combination with these classical approaches in order to improve the test concurrency having assigned power dissipation limits. A comparison between the results of the test scheduling experiments highlights the advantages and disadvantages of applying different classical scheduling algorithms to the power-constrained test scheduling proble

REDUCING POWER DURING MANUFACTURING TEST USING DIFFERENT ARCHITECTURES

Power during manufacturing test can be several times higher than power consumption in functional mode. Excessive power during test can cause IR drop, over-heating, and early aging of the chips. In this dissertation, three different architectures have been introduced to reduce test power in general cases as well as in certain scenarios, including field test. In the first architecture, scan chains are divided into several segments. Every segment needs a control bit to enable capture in a segment when new faults are detectable on that segment for that pattern. Otherwise, the segment should be disabled to reduce capture power. We group the control bits together into one or more control chains. To address the extra pin(s) required to shift data into the control chain(s) and significant post processing in the first architecture, we explored a second architecture. The second architecture stitches the control bits into the chains they control as EECBs (embedded enable capture bits) in between the segments. This allows an ATPG software tool to automatically generate the appropriate EECB values for each pattern to maintain the fault coverage. This also works in the presence of an on-chip decompressor. The last architecture focuses primarily on the self-test of a device in a 3D stacked IC when an existing FPGA in the stack can be programmed as a tester. We show that the energy expended during test is significantly less than would be required using low power patterns fed by an on-chip decompressor for the same very short scan chains

Test Slice Difference Technique for Low-Transition Test Data Compression

[[notice]]補正完畢[[incitationindex]]EI[[booktype]]電子

A novel scan segmentation design method for avoiding shift timing failure in scan testing

ITC : 2011 IEEE International Test Conference , 20-22 Sep. 2011 , Anaheim, CA, USAHigh power consumption in scan testing can cause undue yield loss which has increasingly become a serious problem for deep-submicron VLSI circuits. Growing evidence attributes this problem to shift timing failures, which are primarily caused by excessive switching activity in the proximities of clock paths that tends to introduce severe clock skew due to IR-drop-induced delay increase. This paper is the first of its kind to address this critical issue with a novel layout-aware scheme based on scan segmentation design, called LCTI-SS (Low-Clock-Tree-Impact Scan Segmentation). An optimal combination of scan segments is identified for simultaneous clocking so that the switching activity in the proximities of clock trees is reduced while maintaining the average power reduction effect on conventional scan segmentation. Experimental results on benchmark and industrial circuits have demonstrated the advantage of the LCTI-SS scheme

Evolution of Test Programs Exploiting a FSM Processor Model

Microprocessor testing is becoming a challenging task, due to the increasing complexity of modern architectures. Nowadays, most architectures are tackled with a combination of scan chains and Software-Based Self-Test (SBST) methodologies. Among SBST techniques, evolutionary feedback-based ones prove effective in microprocessor testing: their main disadvantage, however, is the considerable time required to generate suitable test programs. A novel evolutionary-based approach, able to appreciably reduce the generation time, is presented. The proposed method exploits a high-level representation of the architecture under test and a dynamically built Finite State Machine (FSM) model to assess fault coverage without resorting to time-expensive simulations on low-level models. Experimental results, performed on an OpenRISC processor, show that the resulting test obtains a nearly complete fault coverage against the targeted fault mode

Thermal-Safe Test Scheduling for Core-Based System-on-a-Chip Integrated Circuits

Overheating has been acknowledged as a major problem during the testing of complex system-on-chip (SOC) integrated circuits. Several power-constrained test scheduling solutions have been recently proposed to tackle this problem during system integration. However, we show that these approaches cannot guarantee hot-spot-free test schedules because they do not take into account the non-uniform distribution of heat dissipation across the die and the physical adjacency of simultaneously active cores. This paper proposes a new test scheduling approach that is able to produce short test schedules and guarantee thermal-safety at the same time. Two thermal-safe test scheduling algorithms are proposed. The first algorithm computes an exact (shortest) test schedule that is guaranteed to satisfy a given maximum temperature constraint. The second algorithm is a heuristic intended for complex systems with a large number of embedded cores, for which the exact thermal-safe test scheduling algorithm may not be feasible. Based on a low-complexity test session thermal cost model, this algorithm produces near-optimal length test schedules with significantly less computational effort compared to the optimal algorithm