Investigation of a hierarchical context-aware architecture for rule-based customisation of mobile computing service

The continuous technical progress in mobile device built-in modules and embedded sensing techniques creates opportunities for context-aware mobile applications. The context-aware computing paradigm exploits the relevant context as implicit input to characterise the user and physical environment and provide a computing service customised to the contextual situation. However, heterogeneity in techniques, complexity of contextual situation, and gap between raw sensor data and usable context keep the techniques from truly integration for extensive use. Studies in this area mainly focus on feasibility demonstration of the emerging techniques, and they lack general architecture support and appropriate service customisation strategy. This investigation aims to provide general system architecture and technical approaches to deal with the heterogeneity problem and efficiently utilise the dynamic context towards proactive computing service that is customised to the contextual situation. The main efforts of this investigation are the approaches to gathering, handling, and utilising the dynamic context information in an efficient way and the decision making and optimisation methods for computing service customisation. In brief, the highlights of this thesis cover the following aspects: (1) a hierarchical context-aware computing architecture supporting interoperable distribution and further use of context; (2) an in-depth analysis and classification of context and the corresponding context acquisition methods; (3) context modelling and context data representation for efficient and interoperable use of context; (4) a rule-based service customisation strategy with a rule generation mechanism to supervise the service customisation. In addition, feasibility demonstration of the proposed system and contribution justification of this investigation are conducted through case studies and prototype implementations. One case study uses mobile built-in sensing techniques to improve the usability and efficiency of mobile applications constrained by resource limitation, and the other employs the mobile terminal and embedded sensing techniques to predict users’ expectations for home facility automatic control. Results demonstrate the feasibility of the proposed context handling architecture and service customisation methods. It shows great potential for employing the context of the computing environment for context-aware adaptation in pervasive and mobile applications but also indicates some underlying problems for further study

Named Data Networking in Vehicular Ad hoc Networks: State-of-the-Art and Challenges

International audienceInformation-Centric Networking (ICN) has been proposed as one of the future Internet architectures. It is poised to address the challenges faced by today's Internet that include, but not limited to, scalability, addressing, security, and privacy. Furthermore, it also aims at meeting the requirements for new emerging Internet applications. To realize ICN, Named Data Networking (NDN) is one of the recent implementations of ICN that provides a suitable communication approach due to its clean slate design and simple communication model. There are a plethora of applications realized through ICN in different domains where data is the focal point of communication. One such domain is Intelligent Transportation System (ITS) realized through Vehicular Ad hoc NETwork (VANET) where vehicles exchange information and content with each other and with the infrastructure. To date, excellent research results have been yielded in the VANET domain aiming at safe, reliable, and infotainment-rich driving experience. However, due to the dynamic topologies, host-centric model, and ephemeral nature of vehicular communication, various challenges are faced by VANET that hinder the realization of successful vehicular networks and adversely affect the data dissemination, content delivery, and user experiences. To fill these gaps, NDN has been extensively used as underlying communication paradigm for VANET. Inspired by the extensive research results in NDN-based VANET, in this paper, we provide a detailed and systematic review of NDN-driven VANET. More precisely, we investigate the role of NDN in VANET and discuss the feasibility of NDN architecture in VANET environment. Subsequently, we cover in detail, NDN-based naming, routing and forwarding, caching, mobility, and security mechanism for VANET. Furthermore, we discuss the existing standards, solutions, and simulation tools used in NDN-based VANET. Finally, we also identify open challenges and issues faced by NDN-driven VANET and highlight future research directions that should be addressed by the research community

A Review of the Teaching and Learning on Power Electronics Course

—In this review, we describe various kinds of problem and solution related teaching and learning on power electronics course all around the world. The method was used the study of literature on journal articles and proceedings published by reputable international organizations. Thirtynine papers were obtained using Boolean operators, according to the specified criteria. The results of the problems generally established that student learning motivation was low, teaching approaches that are still teacher-centered, the scope of the curriculum extends, and the physical limitations of laboratory equipment. The solutions offered are very diverse ranging from models, strategies, methods and learning techniques supported by information and communication technology

Intelligent MANET optimisation system

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.In the literature, various Mobile Ad hoc NETwork (MANET) routing protocols proposed. Each performs the best under specific context conditions, for example under high mobility or less volatile topologies. In existing MANET, the degradation in the routing protocol performance is always associated with changes in the network context. To date, no MANET routing protocol is able to produce optimal performance under all possible conditions. The core aim of this thesis is to solve the routing problem in mobile Ad hoc networks by introducing an optimum system that is in charge of the selection of the running routing protocol at all times, the system proposed in this thesis aims to address the degradation mentioned above. This optimisation system is a novel approach that can cope with the network performance’s degradation problem by switching to other routing protocol. The optimisation system proposed for MANET in this thesis adaptively selects the best routing protocol using an Artificial Intelligence mechanism according to the network context. In this thesis, MANET modelling helps in understanding the network performance through different contexts, as well as the models’ support to the optimisation system. Therefore, one of the main contributions of this thesis is the utilisation and comparison of various modelling techniques to create representative MANET performance models. Moreover, the proposed system uses an optimisation method to select the optimal communication routing protocol for the network context. Therefore, to build the proposed system, different optimisation techniques were utilised and compared to identify the best optimisation technique for the MANET intelligent system, which is also an important contribution of this thesis. The parameters selected to describe the network context were the network size and average mobility. The proposed system then functions by varying the routing mechanism with the time to keep the network performance at the best level. The selected protocol has been shown to produce a combination of: higher throughput, lower delay, fewer retransmission attempts, less data drop, and lower load, and was thus chosen on this basis. Validation test results indicate that the identified protocol can achieve both a better network performance quality than other routing protocols and a minimum cost function of 4.4%. The Ad hoc On Demand Distance Vector (AODV) protocol comes in second with a cost minimisation function of 27.5%, and the Optimised Link State Routing (OLSR) algorithm comes in third with a cost minimisation function of 29.8%. Finally, The Dynamic Source Routing (DSR) algorithm comes in last with a cost minimisation function of 38.3%

High-Performance Modelling and Simulation for Big Data Applications

This open access book was prepared as a Final Publication of the COST Action IC1406 “High-Performance Modelling and Simulation for Big Data Applications (cHiPSet)“ project. Long considered important pillars of the scientific method, Modelling and Simulation have evolved from traditional discrete numerical methods to complex data-intensive continuous analytical optimisations. Resolution, scale, and accuracy have become essential to predict and analyse natural and complex systems in science and engineering. When their level of abstraction raises to have a better discernment of the domain at hand, their representation gets increasingly demanding for computational and data resources. On the other hand, High Performance Computing typically entails the effective use of parallel and distributed processing units coupled with efficient storage, communication and visualisation systems to underpin complex data-intensive applications in distinct scientific and technical domains. It is then arguably required to have a seamless interaction of High Performance Computing with Modelling and Simulation in order to store, compute, analyse, and visualise large data sets in science and engineering. Funded by the European Commission, cHiPSet has provided a dynamic trans-European forum for their members and distinguished guests to openly discuss novel perspectives and topics of interests for these two communities. This cHiPSet compendium presents a set of selected case studies related to healthcare, biological data, computational advertising, multimedia, finance, bioinformatics, and telecommunications

Computer Science & Technology Series : XXI Argentine Congress of Computer Science. Selected papers

CACIC’15 was the 21thCongress in the CACIC series. It was organized by the School of Technology at the UNNOBA (North-West of Buenos Aires National University) in Junín, Buenos Aires. The Congress included 13 Workshops with 131 accepted papers, 4 Conferences, 2 invited tutorials, different meetings related with Computer Science Education (Professors, PhD students, Curricula) and an International School with 6 courses. CACIC 2015 was organized following the traditional Congress format, with 13 Workshops covering a diversity of dimensions of Computer Science Research. Each topic was supervised by a committee of 3-5 chairs of different Universities. The call for papers attracted a total of 202 submissions. An average of 2.5 review reports werecollected for each paper, for a grand total of 495 review reports that involved about 191 different reviewers. A total of 131 full papers, involving 404 authors and 75 Universities, were accepted and 24 of them were selected for this book.Red de Universidades con Carreras en Informática (RedUNCI

Computer Science & Technology Series : XXI Argentine Congress of Computer Science. Selected papers

CACIC’15 was the 21thCongress in the CACIC series. It was organized by the School of Technology at the UNNOBA (North-West of Buenos Aires National University) in Junín, Buenos Aires. The Congress included 13 Workshops with 131 accepted papers, 4 Conferences, 2 invited tutorials, different meetings related with Computer Science Education (Professors, PhD students, Curricula) and an International School with 6 courses. CACIC 2015 was organized following the traditional Congress format, with 13 Workshops covering a diversity of dimensions of Computer Science Research. Each topic was supervised by a committee of 3-5 chairs of different Universities. The call for papers attracted a total of 202 submissions. An average of 2.5 review reports werecollected for each paper, for a grand total of 495 review reports that involved about 191 different reviewers. A total of 131 full papers, involving 404 authors and 75 Universities, were accepted and 24 of them were selected for this book.Red de Universidades con Carreras en Informática (RedUNCI

High-Performance Modelling and Simulation for Big Data Applications

This open access book was prepared as a Final Publication of the COST Action IC1406 “High-Performance Modelling and Simulation for Big Data Applications (cHiPSet)“ project. Long considered important pillars of the scientific method, Modelling and Simulation have evolved from traditional discrete numerical methods to complex data-intensive continuous analytical optimisations. Resolution, scale, and accuracy have become essential to predict and analyse natural and complex systems in science and engineering. When their level of abstraction raises to have a better discernment of the domain at hand, their representation gets increasingly demanding for computational and data resources. On the other hand, High Performance Computing typically entails the effective use of parallel and distributed processing units coupled with efficient storage, communication and visualisation systems to underpin complex data-intensive applications in distinct scientific and technical domains. It is then arguably required to have a seamless interaction of High Performance Computing with Modelling and Simulation in order to store, compute, analyse, and visualise large data sets in science and engineering. Funded by the European Commission, cHiPSet has provided a dynamic trans-European forum for their members and distinguished guests to openly discuss novel perspectives and topics of interests for these two communities. This cHiPSet compendium presents a set of selected case studies related to healthcare, biological data, computational advertising, multimedia, finance, bioinformatics, and telecommunications