3,022 research outputs found
HERO: Heterogeneous Embedded Research Platform for Exploring RISC-V Manycore Accelerators on FPGA
Heterogeneous embedded systems on chip (HESoCs) co-integrate a standard host
processor with programmable manycore accelerators (PMCAs) to combine
general-purpose computing with domain-specific, efficient processing
capabilities. While leading companies successfully advance their HESoC
products, research lags behind due to the challenges of building a prototyping
platform that unites an industry-standard host processor with an open research
PMCA architecture. In this work we introduce HERO, an FPGA-based research
platform that combines a PMCA composed of clusters of RISC-V cores, implemented
as soft cores on an FPGA fabric, with a hard ARM Cortex-A multicore host
processor. The PMCA architecture mapped on the FPGA is silicon-proven,
scalable, configurable, and fully modifiable. HERO includes a complete software
stack that consists of a heterogeneous cross-compilation toolchain with support
for OpenMP accelerator programming, a Linux driver, and runtime libraries for
both host and PMCA. HERO is designed to facilitate rapid exploration on all
software and hardware layers: run-time behavior can be accurately analyzed by
tracing events, and modifications can be validated through fully automated hard
ware and software builds and executed tests. We demonstrate the usefulness of
HERO by means of case studies from our research
DyPS: Dynamic Processor Switching for Energy-Aware Video Decoding on Multi-core SoCs
In addition to General Purpose Processors (GPP), Multicore SoCs equipping
modern mobile devices contain specialized Digital Signal Processor designed
with the aim to provide better performance and low energy consumption
properties. However, the experimental measurements we have achieved revealed
that system overhead, in case of DSP video decoding, causes drastic
performances drop and energy efficiency as compared to the GPP decoding. This
paper describes DyPS, a new approach for energy-aware processor switching (GPP
or DSP) according to the video quality . We show the pertinence of our solution
in the context of adaptive video decoding and describe an implementation on an
embedded Linux operating system with the help of the GStreamer framework. A
simple case study showed that DyPS achieves 30% energy saving while sustaining
the decoding performanc
Towards a Scalable Hardware/Software Co-Design Platform for Real-time Pedestrian Tracking Based on a ZYNQ-7000 Device
Currently, most designers face a daunting task to
research different design flows and learn the intricacies of
specific software from various manufacturers in
hardware/software co-design. An urgent need of creating a
scalable hardware/software co-design platform has become a key
strategic element for developing hardware/software integrated
systems. In this paper, we propose a new design flow for building
a scalable co-design platform on FPGA-based system-on-chip.
We employ an integrated approach to implement a histogram
oriented gradients (HOG) and a support vector machine (SVM)
classification on a programmable device for pedestrian tracking.
Not only was hardware resource analysis reported, but the
precision and success rates of pedestrian tracking on nine open
access image data sets are also analysed. Finally, our proposed
design flow can be used for any real-time image processingrelated
products on programmable ZYNQ-based embedded
systems, which benefits from a reduced design time and provide a
scalable solution for embedded image processing products
An IoT Endpoint System-on-Chip for Secure and Energy-Efficient Near-Sensor Analytics
Near-sensor data analytics is a promising direction for IoT endpoints, as it
minimizes energy spent on communication and reduces network load - but it also
poses security concerns, as valuable data is stored or sent over the network at
various stages of the analytics pipeline. Using encryption to protect sensitive
data at the boundary of the on-chip analytics engine is a way to address data
security issues. To cope with the combined workload of analytics and encryption
in a tight power envelope, we propose Fulmine, a System-on-Chip based on a
tightly-coupled multi-core cluster augmented with specialized blocks for
compute-intensive data processing and encryption functions, supporting software
programmability for regular computing tasks. The Fulmine SoC, fabricated in
65nm technology, consumes less than 20mW on average at 0.8V achieving an
efficiency of up to 70pJ/B in encryption, 50pJ/px in convolution, or up to
25MIPS/mW in software. As a strong argument for real-life flexible application
of our platform, we show experimental results for three secure analytics use
cases: secure autonomous aerial surveillance with a state-of-the-art deep CNN
consuming 3.16pJ per equivalent RISC op; local CNN-based face detection with
secured remote recognition in 5.74pJ/op; and seizure detection with encrypted
data collection from EEG within 12.7pJ/op.Comment: 15 pages, 12 figures, accepted for publication to the IEEE
Transactions on Circuits and Systems - I: Regular Paper
Toolflows for Mapping Convolutional Neural Networks on FPGAs: A Survey and Future Directions
In the past decade, Convolutional Neural Networks (CNNs) have demonstrated
state-of-the-art performance in various Artificial Intelligence tasks. To
accelerate the experimentation and development of CNNs, several software
frameworks have been released, primarily targeting power-hungry CPUs and GPUs.
In this context, reconfigurable hardware in the form of FPGAs constitutes a
potential alternative platform that can be integrated in the existing deep
learning ecosystem to provide a tunable balance between performance, power
consumption and programmability. In this paper, a survey of the existing
CNN-to-FPGA toolflows is presented, comprising a comparative study of their key
characteristics which include the supported applications, architectural
choices, design space exploration methods and achieved performance. Moreover,
major challenges and objectives introduced by the latest trends in CNN
algorithmic research are identified and presented. Finally, a uniform
evaluation methodology is proposed, aiming at the comprehensive, complete and
in-depth evaluation of CNN-to-FPGA toolflows.Comment: Accepted for publication at the ACM Computing Surveys (CSUR) journal,
201
Dynamic Vision Sensor integration on FPGA-based CNN accelerators for high-speed visual classification
Deep-learning is a cutting edge theory that is being applied to many fields.
For vision applications the Convolutional Neural Networks (CNN) are demanding
significant accuracy for classification tasks. Numerous hardware accelerators
have populated during the last years to improve CPU or GPU based solutions.
This technology is commonly prototyped and tested over FPGAs before being
considered for ASIC fabrication for mass production. The use of commercial
typical cameras (30fps) limits the capabilities of these systems for high speed
applications. The use of dynamic vision sensors (DVS) that emulate the behavior
of a biological retina is taking an incremental importance to improve this
applications due to its nature, where the information is represented by a
continuous stream of spikes and the frames to be processed by the CNN are
constructed collecting a fixed number of these spikes (called events). The
faster an object is, the more events are produced by DVS, so the higher is the
equivalent frame rate. Therefore, these DVS utilization allows to compute a
frame at the maximum speed a CNN accelerator can offer. In this paper we
present a VHDL/HLS description of a pipelined design for FPGA able to collect
events from an Address-Event-Representation (AER) DVS retina to obtain a
normalized histogram to be used by a particular CNN accelerator, called
NullHop. VHDL is used to describe the circuit, and HLS for computation blocks,
which are used to perform the normalization of a frame needed for the CNN.
Results outperform previous implementations of frames collection and
normalization using ARM processors running at 800MHz on a Zynq7100 in both
latency and power consumption. A measured 67% speedup factor is presented for a
Roshambo CNN real-time experiment running at 160fps peak rate.Comment: 7 page
- …