Wireless broadband access: WiMAX and beyond - Investigation of bandwidth request mechanisms under point-to-multipoint mode of WiMAX networks

The WiMAX standard specifies a metropolitan area broadband wireless access air interface. In order to support QoS for multimedia applications, various bandwidth request and scheduling mechanisms are suggested in WiMAX, in which a subscriber station can send request messages to a base station, and the base station can grant or reject the request according to the available radio resources. This article first compares two fundamental bandwidth request mechanisms specified in the standard, random access vs. polling under the point-to-multipoint mode, a mandatory transmission mode. Our results demonstrate that random access outperforms polling when the request rate is low. However, its performance degrades significantly when the channel is congested. Adaptive switching between random access and polling according to load can improve system performance. We also investigate the impact of channel noise on the random access request mechanism

A Fair and Efficient Packet Scheduling Scheme for IEEE 802.16 Broadband Wireless Access Systems

This paper proposes a fair and efficient QoS scheduling scheme for IEEE 802.16 BWA systems that satisfies both throughput and delay guarantee to various real and non-real time applications. The proposed QoS scheduling scheme is compared with an existing QoS scheduling scheme proposed in literature in recent past. Simulation results show that the proposed scheduling scheme can provide a tight QoS guarantee in terms of delay, delay violation rate and throughput for all types of traffic as defined in the WiMAX standard, thereby maintaining the fairness and helps to eliminate starvation of lower priority class services. Bandwidth utilization of the system and fairness index of the resources are also encountered to validate the QoS provided by our proposed scheduling scheme

Study of IEEE802.16e standards to improve QoS throughput and delay analysis of PMP MAC Scheduling algorithms

WiMAX has two modes of operation: Point to Multi Point (PMP) mode and Mesh mode. PMP mode consists of one BS and multiple SS.The Wi-MAX is IEEE 802.16 Wireless network standard which recently used for Broadband Wireless communication. Now days to satisfy the highest demand of broadband wireless access by using various resource of bandwidth is a biggest challenge for Researchers, in this time WiMAX (Worldwide Interoperability for Microwave Access) emerged as a better solution to fulfil that demand. To provide authentic services for voice, data and videos WiMAX define the various QoS parameters at Media Access Control (MAC) layer. WiMAX structure is based on IEEE 802.16 OSI standard and defines the PMP (Point to Multipoint) and Mesh modes for transmission of information. In this study, cross-layer scheduling algorithm for Wimax networks has been proposed

WIMAX Basics from PHY Layer to Scheduling and Multicasting Approaches

WiMAX (Worldwide Interoperability for Microwave Access) is an emerging broadband wireless technology for providing Last mile solutions for supporting higher bandwidth and multiple service classes with various quality of service requirement. The unique architecture of the WiMAX MAC and PHY layers that uses OFDMA to allocate multiple channels with different modulation schema and multiple time slots for each channel allows better adaptation of heterogeneous user’s requirements. The main architecture in WiMAX uses PMP (Point to Multipoint), Mesh mode or the new MMR (Mobile Multi hop Mode) deployments where scheduling and multicasting have different approaches. In PMP SS (Subscriber Station) connects directly to BS (Base Station) in a single hop route so channel conditions adaptations and supporting QoS for classes of services is the key points in scheduling, admission control or multicasting, while in Mesh networks SS connects to other SS Stations or to the BS in a multi hop routes, the MMR mode extends the PMP mode in which the SS connects to either a relay station (RS) or to Bs. Both MMR and Mesh uses centralized or distributed scheduling with multicasting schemas based on scheduling trees for routing. In this paper a broad study is conducted About WiMAX technology PMP and Mesh deployments from main physical layers features with differentiation of MAC layer features to scheduling and multicasting approaches in both modes of operations

Joint Concurrent Routing and Multi-Pointer Packet Scheduling in IEEE 802.16 Mesh Networks

IEEE 802.16, also known as Worldwide Interoperability for Microwave Access (WiMAX), is a standardization effort carried out by the IEEE to provide last-mile broadband access to end users. The IEEE 802.16 standard supports two medium access control (MAC) modes - a mandatory point to multipoint (PMP) mode and an optional mesh mode. In this paper, we propose an asymmetric interference aware routing algorithm and a new multipointer approach in implementing scheduling algorithms for IEEE 802.16 mesh networks. We modify three different centralized scheduling algorithms, fixed scheduling, ordered scheduling and per-slot scheduling using multipointer approach to allow for spatial reuse (SR) in IEEE 802.16 mesh networks. Simulation results reveal that fixed scheduling with SR provides the best performance

Connection admission control and packet scheduling for IEEE 802.16 networks

Includes bibliographical references.The IEEE 802.16 standard introduced as one of the Wireless Metropolitan Area Networks (WMAN) for Broadband Wireless Access (BWA) which is known as Worldwide Interoperability for Microwave Access (WiMAX), provides a solution of broadband connectivity to areas where wired infrastructure is economically and technically infeasible. Apart from the advantage of having high speeds and low costs, IEEE 802.16 has the capability to simultaneously support various service types with required QoS characteristics. ... While IEEE 802.16 standard defines medium access control (MAC) and physical (PHY) layers specification, admission control and packet scheduling mechanisms which are important elements of QoS provisioning are left to vendors to design and implement for service differentiation and QoS support