Stabilization of bipedal walking based on compliance control

The embodiment of physical compliance in humanoid robots, inspired by biology, improves the robustness of locomotion in unknown environments. The mechanical implementation using elastic materials demands a further combination together with controlled compliance to make the intrinsic compliance more effective. We hereby present an active compliance control to stabilize the humanoid robots for standing and walking tasks. Our actively controlled compliance is achieved via admittance control using closed-loop feedback of the six axis force/torque sensors in the feet. The modeling and theoretical formulation are presented, followed by the simulation study. Further, the control algorithms were validated on a real humanoid robot COMAN with inherent compliance. A series of experimental comparisons were studied, including standing balancing against impacts, straight walking, and omni-directional walking, to demonstrate the necessity and the effectiveness of applying controlled compliance on the basis of physical elasticity to enhance compliant foot-ground interaction for the successful locomotion. All data from simulations and experiments related with the proposed controller and the performance are presented, analyzed, and discussed

Planning and Control Strategies for Motion and Interaction of the Humanoid Robot COMAN+

Despite the majority of robotic platforms are still confined in controlled environments such as factories, thanks to the ever-increasing level of autonomy and the progress on human-robot interaction, robots are starting to be employed for different operations, expanding their focus from uniquely industrial to more diversified scenarios. Humanoid research seeks to obtain the versatility and dexterity of robots capable of mimicking human motion in any environment. With the aim of operating side-to-side with humans, they should be able to carry out complex tasks without posing a threat during operations. In this regard, locomotion, physical interaction with the environment and safety are three essential skills to develop for a biped. Concerning the higher behavioural level of a humanoid, this thesis addresses both ad-hoc movements generated for specific physical interaction tasks and cyclic movements for locomotion. While belonging to the same category and sharing some of the theoretical obstacles, these actions require different approaches: a general high-level task is composed of specific movements that depend on the environment and the nature of the task itself, while regular locomotion involves the generation of periodic trajectories of the limbs. Separate planning and control architectures targeting these aspects of biped motion are designed and developed both from a theoretical and a practical standpoint, demonstrating their efficacy on the new humanoid robot COMAN+, built at Istituto Italiano di Tecnologia. The problem of interaction has been tackled by mimicking the intrinsic elasticity of human muscles, integrating active compliant controllers. However, while state-of-the-art robots may be endowed with compliant architectures, not many can withstand potential system failures that could compromise the safety of a human interacting with the robot. This thesis proposes an implementation of such low-level controller that guarantees a fail-safe behaviour, removing the threat that a humanoid robot could pose if a system failure occurred

Compliance control for stabilizing the humanoid on the changing slope based on terrain inclination estimation

This paper presents a stabilization framework integrated with the estimation of the terrain inclination to balance a humanoid on the changing slope as an extension to our previous study. In this paper, the estimation of the terrain inclination is improved for walking in place on an inclination-varying slope. A passivity based admittance control utilizes the force/torque sensing in feet to actively regulate the impedance at the center of mass to stabilize the robot. The logic-based inclination estimation algorithm uses the feet to probe the terrain and deals with the under-actuation. The equilibrium set-point in the admittance control is regulated based on the detected inclination. The effectiveness of the control framework is validated on the humanoid robot COMAN and demonstrated by estimating the terrain inclination, coping with the under-actuation phase, adapting to the slope with changing inclination during both standing and walking. Experimental data are analyzed and discussed, and the future work is suggested

Robust Model Predictive Control for humanoids standing balancing

This paper presents the implementations of Model Predictive Control for the standing balance control of a humanoid to reject external disturbances. The strategies allow the robot to have a compliant behaviour against external forces resulting in a stable and smooth response. The first, ZMP based controller, compensates for the center of mass deviation while the second, attitude controller, regulates the orientation of the body to counterbalance the external disturbances. These two control strategies are combined as an integrated stabilizer, which further increases the effectiveness. Simulation studies on the COMAN humanoid are presented and the data are analysed. The simulations show significant improvements in rejection of external disturbances compared to an existing compliant stabilizer

Benchmarking Dynamic Balancing Controllers for Humanoid Robots

This paper presents a comparison study of three control design approaches for humanoid balancing based on the Center of Mass (CoM) stabilization and body posture adjustment. The comparison was carried out under controlled circumstances allowing other researchers to replicate and compare our results with their own. The feedback control from state space design is based on simple models and provides sufficient robustness to control complex and high Degrees of Freedom (DoFs) systems, such as humanoids. The implemented strategies allow compliant behavior of the robot in reaction to impulsive or periodical disturbances, resulting in a smooth and human-like response while considering constraints. In this respect, we implemented two balancing strategies to compensate for the CoM deviation. The first one uses the robot’s capture point as a stability principle and the second one uses the Force/Torque sensors at the ankles to define a CoM reference that stabilizes the robot. In addition, was implemented a third strategy based on upper body orientation to absorb external disturbances and counterbalance them. Even though the balancing strategies are implemented independently, they can be merged to further increase balancing performance. The proposed strategies were previously applied on different humanoid bipedal platforms, however, their performance could not be properly benchmarked before. With this concern, this paper focuses on benchmarking in controlled scenarios to help the community in comparing different balance techniques. The key performance indicators (KPIs) used in our comparison are the CoM deviation, the settling time, the maximum measured orientation, passive gait measure, measured ankles torques, and reconstructed Center of Pressure (CoP). The benchmarking experiments were carried out in simulations and using the facility at Istituto Italiano di Tecnologia on the REEM-C humanoid robot provided by PAL robotics inside the EU H2020 project EUROBENCH framework

Methods to improve the coping capacities of whole-body controllers for humanoid robots

Current applications for humanoid robotics require autonomy in an environment specifically adapted to humans, and safe coexistence with people. Whole-body control is promising in this sense, having shown to successfully achieve locomotion and manipulation tasks. However, robustness remains an issue: whole-body controllers can still hardly cope with unexpected disturbances, with changes in working conditions, or with performing a variety of tasks, without human intervention. In this thesis, we explore how whole-body control approaches can be designed to address these issues. Based on whole-body control, contributions have been developed along three main axes: joint limit avoidance, automatic parameter tuning, and generalizing whole-body motions achieved by a controller. We first establish a whole-body torque-controller for the iCub, based on the stack-of-tasks approach and proposed feedback control laws in SE(3). From there, we develop a novel, theoretically guaranteed joint limit avoidance technique for torque-control, through a parametrization of the feasible joint space. This technique allows the robot to remain compliant, while resisting external perturbations that push joints closer to their limits, as demonstrated with experiments in simulation and with the real robot. Then, we focus on the issue of automatically tuning parameters of the controller, in order to improve its behavior across different situations. We show that our approach for learning task priorities, combining domain randomization and carefully selected fitness functions, allows the successful transfer of results between platforms subjected to different working conditions. Following these results, we then propose a controller which allows for generic, complex whole-body motions through real-time teleoperation. This approach is notably verified on the robot to follow generic movements of the teleoperator while in double support, as well as to follow the teleoperator\u2019s upper-body movements while walking with footsteps adapted from the teleoperator\u2019s footsteps. The approaches proposed in this thesis therefore improve the capability of whole-body controllers to cope with external disturbances, different working conditions and generic whole-body motions

A torque-controlled humanoid robot riding on a two-wheeled mobile platform

This paper is motivated by the questions: What would happen if a humanoid robot is put on a Segway? Is it possible for the humanoid robot to use this transportation device that is specifically designed for human? Simulation involving a two-wheeled mobile platform (TWMP) and our humanoid robot COMAN (COmpliant HuMANoid Platform) shows that it is indeed feasible without any hardware modification. Regarding the implementation, the full dynamics of the humanoid robot is considered and quadratic optimization is employed to generate whole-body joint torques to realise two types of tasks according to the interaction type between the TWMP and the humanoid robot. The TWMP is considered as unknown disturbance and the humanoid robot has to keep balancing on it in the first type of task. On the contrary, the active movement of the humanoid robot is utilised as an interface to intuitively drive the TWMP in the second type of task. For both tasks, tracking the position of center of mass (CoM) and regulating the angular momentum around it are considered as primary objectives, stabilizing the posture of certain part of its body is optional. In addition, both tasks are repeated on uneven terrain to demonstrate the robustness of the control method

Climbing and Walking Robots

Nowadays robotics is one of the most dynamic fields of scientific researches. The shift of robotics researches from manufacturing to services applications is clear. During the last decades interest in studying climbing and walking robots has been increased. This increasing interest has been in many areas that most important ones of them are: mechanics, electronics, medical engineering, cybernetics, controls, and computers. Today’s climbing and walking robots are a combination of manipulative, perceptive, communicative, and cognitive abilities and they are capable of performing many tasks in industrial and non- industrial environments. Surveillance, planetary exploration, emergence rescue operations, reconnaissance, petrochemical applications, construction, entertainment, personal services, intervention in severe environments, transportation, medical and etc are some applications from a very diverse application fields of climbing and walking robots. By great progress in this area of robotics it is anticipated that next generation climbing and walking robots will enhance lives and will change the way the human works, thinks and makes decisions. This book presents the state of the art achievments, recent developments, applications and future challenges of climbing and walking robots. These are presented in 24 chapters by authors throughtot the world The book serves as a reference especially for the researchers who are interested in mobile robots. It also is useful for industrial engineers and graduate students in advanced study

Motion Planning and Control of Dynamic Humanoid Locomotion

Inspired by human, humanoid robots has the potential to become a general-purpose platform that lives along with human. Due to the technological advances in many field, such as actuation, sensing, control and intelligence, it finally enables humanoid robots to possess human comparable capabilities. However, humanoid locomotion is still a challenging research field. The large number of degree of freedom structure makes the system difficult to coordinate online. The presence of various contact constraints and the hybrid nature of locomotion tasks make the planning a harder problem to solve. Template model anchoring approach has been adopted to bridge the gap between simple model behavior and the whole-body motion of humanoid robot. Control policies are first developed for simple template models like Linear Inverted Pendulum Model (LIPM) or Spring Loaded Inverted Pendulum(SLIP), the result controlled behaviors are then been mapped to the whole-body motion of humanoid robot through optimization-based task-space control strategies. Whole-body humanoid control framework has been verified on various contact situations such as unknown uneven terrain, multi-contact scenarios and moving platform and shows its generality and versatility. For walking motion, existing Model Predictive Control approach based on LIPM has been extended to enable the robot to walk without any reference foot placement anchoring. It is kind of discrete version of \u201cwalking without thinking\u201d. As a result, the robot could achieve versatile locomotion modes such as automatic foot placement with single reference velocity command, reactive stepping under large external disturbances, guided walking with small constant external pushing forces, robust walking on unknown uneven terrain, reactive stepping in place when blocked by external barrier. As an extension of this proposed framework, also to increase the push recovery capability of the humanoid robot, two new configurations have been proposed to enable the robot to perform cross-step motions. For more dynamic hopping and running motion, SLIP model has been chosen as the template model. Different from traditional model-based analytical approach, a data-driven approach has been proposed to encode the dynamics of the this model. A deep neural network is trained offline with a large amount of simulation data based on the SLIP model to learn its dynamics. The trained network is applied online to generate reference foot placements for the humanoid robot. Simulations have been performed to evaluate the effectiveness of the proposed approach in generating bio-inspired and robust running motions. The method proposed based on 2D SLIP model can be generalized to 3D SLIP model and the extension has been briefly mentioned at the end

Imitation Learning of Motion Coordination in Robots:a Dynamical System Approach

The ease with which humans coordinate all their limbs is fascinating. Such a simplicity is the result of a complex process of motor coordination, i.e. the ability to resolve the biomechanical redundancy in an efficient and repeatable manner. Coordination enables a wide variety of everyday human activities from filling in a glass with water to pair figure skating. Therefore, it is highly desirable to endow robots with similar skills. Despite the apparent diversity of coordinated motions, all of them share a crucial similarity: these motions are dictated by underlying constraints. The constraints shape the formation of the coordination patterns between the different degrees of freedom. Coordination constraints may take a spatio-temporal form; for instance, during bimanual object reaching or while catching a ball on the fly. They also may relate to the dynamics of the task; for instance, when one applies a specific force profile to carry a load. In this thesis, we develop a framework for teaching coordination skills to robots. Coordination may take different forms, here, we focus on teaching a robot intra-limb and bimanual coordination, as well as coordination with a human during physical collaborative tasks. We use tools from well-established domains of Bayesian semiparametric learning (Gaussian Mixture Models and Regression, Hidden Markov Models), nonlinear dynamics, and adaptive control. We take a biologically inspired approach to robot control. Specifically, we adopt an imitation learning perspective to skill transfer, that offers a seamless and intuitive way of capturing the constraints contained in natural human movements. As the robot is taught from motion data provided by a human teacher, we exploit evidence from human motor control of the temporal evolution of human motions that may be described by dynamical systems. Throughout this thesis, we demonstrate that the dynamical system view on movement formation facilitates coordination control in robots. We explain how our framework for teaching coordination to a robot is built up, starting from intra-limb coordination and control, moving to bimanual coordination, and finally to physical interaction with a human. The dissertation opens with the discussion of learning discrete task-level coordination patterns, such as spatio-temporal constraints emerging between the two arms in bimanual manipulation tasks. The encoding of bimanual constraints occurs at the task level and proceeds through a discretization of the task as sequences of bimanual constraints. Once the constraints are learned, the robot utilizes them to couple the two dynamical systems that generate kinematic trajectories for the hands. Explicit coupling of the dynamical systems ensures accurate reproduction of the learned constraints, and proves to be crucial for successful accomplishment of the task. In the second part of this thesis, we consider learning one-arm control policies. We present an approach to extracting non-linear autonomous dynamical systems from kinematic data of arbitrary point-to-point motions. The proposed method aims to tackle the fundamental questions of learning robot coordination: (i) how to infer a motion representation that captures a multivariate coordination pattern between degrees of freedom and that generalizes this pattern to unseen contexts; (ii) whether the policy learned directly from demonstrations can provide robustness against spatial and temporal perturbations. Finally, we demonstrate that the developed dynamical system approach to coordination may go beyond kinematic motion learning. We consider physical interactions between a robot and a human in situations where they jointly perform manipulation tasks; in particular, the problem of collaborative carrying and positioning of a load. We extend the approach proposed in the second part of this thesis to incorporate haptic information into the learning process. As a result, the robot adapts its kinematic motion plan according to human intentions expressed through the haptic signals. Even after the robot has learned the task model, the human still remains a complex contact environment. To ensure robustness of the robot behavior in the face of the variability inherent to human movements, we wrap the learned task model in an adaptive impedance controller with automatic gain tuning. The techniques, developed in this thesis, have been applied to enable learning of unimanual and bimanual manipulation tasks on the robotics platforms HOAP-3, KATANA, and i-Cub, as well as to endow a pair of simulated robots with the ability to perform a manipulation task in the physical collaboration