Device-circuit interactions and impact on TFT circuit-system design

This paper reviews the importance of device-circuit interactions (DCI) and its consideration when designing thin film transistor circuits and systems. We examine temperature- and process-induced variations and propose a way to evaluate the maximum achievable intrinsic performance of the TFT. This is aimed at determining when DCI becomes crucial for a specific application. Compensation methods are then reviewed to show examples of how DCI is considered in the design of AMOLED displays. Other designs such as analog front-end and image sensors are also discussed, where alternate circuits should be designed to overcome the limitations of the intrinsic device properties

a‐InGaZnO thin‐film transistors for AMOLEDs: Electrical stability and pixel‐circuit simulation

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/92036/1/JSID17.6.525.pd

Novel a‐Si:H TFT pixel circuit for electrically stable top‐anode light‐emitting AMOLEDs

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/92120/1/1.2770853.pd

Thin-Film Transistor Integration for Biomedical Imaging and AMOLED Displays

Thin film transistor (TFT) backplanes are being continuously researched for new applications such as active-matrix organic light emitting diode (AMOLED) displays, sensors, and x-ray imagers. However, the circuits implemented in presently available fabrication technologies including poly silicon (poly-Si), hydrogenated amorphous silicon (a-Si:H), and organic semiconductor, are prone to spatial and/or temporal non-uniformities. While current-programmed active matrix (AM) can tolerate mismatches and non-uniformity caused by aging, the long settling time is a significant limitation. Consequently, acceleration schemes are needed and are proposed to reduce the settling time to 20 µs. This technique is used in the development of a pixel circuit and system for biomedical imager and sensor. Here, a metal-insulator-semiconductor (MIS) capacitor is adopted for adjustment and boost of the circuit gain. Thus, the new pixel architecture supports multi-modality imaging for a wide range of applications with various input signal intensities. Also, for applications with lower current levels, a fast current-mode line driver is developed based on positive feedback which controls the effect of the parasitic capacitance. The measured settling time of a conventional current source is around 2 ms for a 100-nA input current and 200-pF parasitic capacitance whereas it is less than 4 μs for the driver presented here. For displays needed in mobile devices such as cell phones and DVD players, another new driving scheme is devised that provides for a high temporal stability, low-power consumption, high tolerance of temperature variations, and high resolution. The performance of the new driving scheme is demonstrated in a 9-inch fabricated display intended for DVD players. Also, a multi-modal imager pixel circuit is developed using this technique to provide for gain-adjustment capability. Here, the readout operation is not destructive, enabling the use of low-cost readout circuitry and noise reduction techniques. In addition, a highly stable and reliable driving scheme, based on step calibration is introduced for high precision displays and imagers. This scheme takes advantage of the slow aging of the electronics in the backplane to simplify the drive electronics. The other attractive features of this newly developed driving scheme are its simplicity, low-power consumption, and fast programming critical for implementation of large-area and high-resolution active matrix arrays for high precision

Pixel Circuits and Driving Schemes for Active-Matrix Organic Light-Emitting Diode Displays

Rapid progress over the last decade on thin film transistor (TFT) active matrix organic light emitting (AMOLED) displays led to the emergence of high-performance, low-power, low-cost flat panel displays. Despite the shortcomings of the active matrix that are associated with the instability and low mobility of TFTs, the amorphous silicon TFT technology still remains the primary solution for the AMOLED backplane. To take advantage of this technology, it is crucial to develop driving schemes and circuit techniques to compensate for the limitations of the TFTs. The driving schemes proposed in this thesis address these challenges, in which, the sensitivity of the OLED current to the transistor variations is reduced significantly. This is achieved by comparing the data signal with a feedback signal associated with the pixel current by means of an external driving circuit through a column feedback line. Depending on the nature of the feedback signal, (i.e. current or voltage) several pixel circuits and external drivers are proposed. New AMOLED pixel circuits with voltage and current feedback are designed, simulated, fabricated, and tested. The performance of these circuits is analyzed in terms of their stability, settling time, power efficiency, noise, and temperature-dependence. For the pixel circuits with current feedback, an operational transresistance amplifier is designed and implemented in a high-voltage CMOS process. Measurement results for both voltage and current feedback driving schemes indicate less than a 2%/V sensitivity to shifts in the threshold voltage of the TFTs. By using current feedback and an accelerating pulse, programming times less than 50 s are achieved

Amorphous Silicon Thin Film Transistor Models and Pixel Circuits for AMOLED Displays

Hydrogenated amorphous Silicon (a-Si:H) Thin Film Transistor (TFT) has many advantages and is one of the suitable choices to implement Active Matrix Organic Light-Emitting Diode (AMOLED) displays. However, the aging of a-Si:H TFT caused by electrical stress affects the stability of pixel performance. To solve this problem, following aspects are important: (1) compact device models and parameter extraction methods for TFT characterization and circuit simulation; (2) a method to simulate TFT aging by using circuit simulator so that its impact on circuit performance can be investigated by using circuit simulation; and (3) novel pixel circuits to compensate the impact of TFT aging on circuit performance. These challenges are addressed in this thesis. A compact device model to describe the static and dynamic behaviors of a-Si:H TFT is presented. Several improvements were made for better accuracy, scalability, and convergence of TFT model. New parameter extraction methods with improved accuracy and consistency were also developed. The improved compact TFT model and new parameter extraction methods are verified by measurement results. Threshold voltage shift (∆Vt) over stress time is the primary aging behavior of a-Si:H TFT under voltage stress. Circuit-level aging simulation is very useful in investigating and optimizing circuit stability. Therefore, a simulation method was developed for circuit-level ∆Vt simulation. Besides, a ∆Vt model which is compatible to circuit simulator was developed. The proposed method and model are verified by measurement results. A novel pixel circuit using a-Si:H TFTs was developed to improve the stability of OLED drive current over stress time. The ∆Vt of drive TFT caused by voltage stress is compensated by an incremental gate voltage generated by utilizing a ∆Vt-dependent charge transfer from drive TFT to a TFT-based Metal-Insulator-Semiconductor (MIS) capacitor. A second MIS capacitor is used to inject positive charge to the gate of drive TFT to improve OLED drive current. The effectiveness of the proposed pixel circuit is verified by simulation and measurement results. The proposed pixel circuit is also compared to several conventional pixel circuits.4 month

Amorphous Silicon Thin Film Transistor Models and Pixel Circuits for AMOLED Displays

Hydrogenated amorphous Silicon (a-Si:H) Thin Film Transistor (TFT) has many advantages and is one of the suitable choices to implement Active Matrix Organic Light-Emitting Diode (AMOLED) displays. However, the aging of a-Si:H TFT caused by electrical stress affects the stability of pixel performance. To solve this problem, following aspects are important: (1) compact device models and parameter extraction methods for TFT characterization and circuit simulation; (2) a method to simulate TFT aging by using circuit simulator so that its impact on circuit performance can be investigated by using circuit simulation; and (3) novel pixel circuits to compensate the impact of TFT aging on circuit performance. These challenges are addressed in this thesis. A compact device model to describe the static and dynamic behaviors of a-Si:H TFT is presented. Several improvements were made for better accuracy, scalability, and convergence of TFT model. New parameter extraction methods with improved accuracy and consistency were also developed. The improved compact TFT model and new parameter extraction methods are verified by measurement results. Threshold voltage shift (∆Vt) over stress time is the primary aging behavior of a-Si:H TFT under voltage stress. Circuit-level aging simulation is very useful in investigating and optimizing circuit stability. Therefore, a simulation method was developed for circuit-level ∆Vt simulation. Besides, a ∆Vt model which is compatible to circuit simulator was developed. The proposed method and model are verified by measurement results. A novel pixel circuit using a-Si:H TFTs was developed to improve the stability of OLED drive current over stress time. The ∆Vt of drive TFT caused by voltage stress is compensated by an incremental gate voltage generated by utilizing a ∆Vt-dependent charge transfer from drive TFT to a TFT-based Metal-Insulator-Semiconductor (MIS) capacitor. A second MIS capacitor is used to inject positive charge to the gate of drive TFT to improve OLED drive current. The effectiveness of the proposed pixel circuit is verified by simulation and measurement results. The proposed pixel circuit is also compared to several conventional pixel circuits.4 month

Wide Bandwidth - High Accuracy Control Loops in the presence of Slow Varying Signals and Applications in Active Matrix Organic Light Emitting Displays and Sensor Arrays

This dissertation deals with the problems of modern active matrix organic light-emitting diode AMOLED display back-plane drivers and sensor arrays. The research described here, aims to classify recently utilized compensation techniques into distinct groups and further pinpoint their advantages and shortcomings. Additionally, a way of describing the loops as mathematical constructs is utilized to derive new circuits from the analog design perspective. A novel principle on display driving is derived by observing those mathematical control loop models and it is analyzed and evaluated as a novel way of pixel driving. Specifically, a new feedback current programming architecture and method is described and validated through experiments, which is compatible with AMOLED displays having the two transistor one capacitor (2T1C) pixel structure. The new pixel programming approach is compatible with all TFT technologies and can compensate for non-uniformities in both threshold voltage and carrier mobility of the pixel OLED drive TFT. Data gathered show that a pixel drive current of 20 nA can be programmed in less than 10usec. This new approach can be implemented within an AMOLED external or integrated display data driver. The method to achieve robustness in the operation of the loop is also presented here, observed through a series of measurements. All the peripheral blocks implementing the design are presented and analyzed through simulations and verified experimentally. Sources of noise are identified and eliminated, while new techniques for better isolation from digital noise are described and tested on a newly fabricated driver. Multiple versions of the new proposed circuit are outlined, simulated, fabricated and measured to evaluate their performance.A novel active matrix array approach suitable for a compact multi-channel gas sensor platform is also described. The proposed active matrix sensor array utilizes an array of P-i-N diodes each connected in series with an Inter-Digitated Electrode (IDE). The functionality of 8x8 and 16x16 sensor arrays measured through external current feedback loops is also presented for the 8x8 arrays and the detection of ammonia (NH3) and chlorine (Cl2) vapor sources is demonstrated

TFTs circuit simulation models and analogue building block designs

Building functional thin-film-transistor (TFT) circuits is crucial for applications such as wearable, implantable and transparent electronics. Therefore, developing a compact model of an emerging semiconductor material for accurate circuit simulation is the most fundamental requirement for circuit design. Further, unique analogue building blocks are needed due to the specific properties and non-idealities of TFTs. This dissertation reviews the major developments in thin-film transistor (TFT) modelling for the computer-aided design (CAD) and simulation of circuits and systems. Following the progress in recent years on oxide TFTs, we have successfully developed a Verilog-AMS model called the CAMCAS model, which supports computer-aided circuit simulation of oxide-TFTs, with the potential to be extended to other types of TFT technology families. For analogue applications, an accurate small signal model for thin film transistors (TFTs) is presented taking into account non-idealities such as contact resistance, parasitic capacitance, and threshold voltage shift to exhibit higher accuracy in comparison with the adapted CMOS model. The model is used to extract the zeros and poles of the frequency response in analogue circuits. In particular, we consider the importance of device-circuit interactions (DCI) when designing thin film transistor circuits and systems and subsequently examine temperature- and process-induced variations and propose a way to evaluate the maximum achievable intrinsic performance of the TFT. This is aimed at determining when DCI becomes crucial for a specific application. Compensation methods are reviewed to show examples of how DCI is considered in the design of AMOLED displays. Based on these design considerations, analogue building blocks including voltage and current references and differential amplifier stages have been designed to expand the analogue library specifically for TFT circuit design. The $V_T$ shift problem has been compensated based on unique circuit structures. For a future generation of application, where ultra low power consumption is a critical requirement, we investigate the TFT’s subthreshold operation through examining several figures of merit including intrinsic gain ($A_i$), transconductance efficiency ($g_m/I_{DS}$) and cut-off frequency ($f_T$). Here, we consider design sensitivity for biasing circuitry and the impact of device variations on low power circuit behaviour.Cambridge Commonwealth, European & International Trust, Chinese Scholarship Counci

Flexible IGZO TFT Spice model and design of active strain-compensation circuits for bendable active matrix arrays

The detailed measurement and characterization of strain induced performance variations in flexible InGaZnO thinfilm transistors (TFTs) resulted in a Spice TFT model able to simulate tensile and compressive bending. This model was used to evaluate a new concept, namely the active compensation of strain induced performance variations in pixel driving circuits for bendable active matrix arrays. The designed circuits can compensate the mobility and threshold voltage shifts in IGZO TFTs induced by bending. In a single TFT, a drain current of 1 mA varies by 83 µA per percent of mechanical strain. The most effective compensation circuit design, comprising one additional TFT and two resistors, reduces the driving current variation to 1.1 µA per percent of strain. The compensation circuit requires no additional control signals, and increases the power consumption by only 235 µW (corresponds to 4.7 %). Finally, switching operation is possible for frequencies up to 200 kHz. This opens a way towards the fabrication of flexible displays with constant brightness even when bent