3,941 research outputs found
Position and Orientation Estimation through Millimeter Wave MIMO in 5G Systems
Millimeter wave signals and large antenna arrays are considered enabling
technologies for future 5G networks. While their benefits for achieving
high-data rate communications are well-known, their potential advantages for
accurate positioning are largely undiscovered. We derive the Cram\'{e}r-Rao
bound (CRB) on position and rotation angle estimation uncertainty from
millimeter wave signals from a single transmitter, in the presence of
scatterers. We also present a novel two-stage algorithm for position and
rotation angle estimation that attains the CRB for average to high
signal-to-noise ratio. The algorithm is based on multiple measurement vectors
matching pursuit for coarse estimation, followed by a refinement stage based on
the space-alternating generalized expectation maximization algorithm. We find
that accurate position and rotation angle estimation is possible using signals
from a single transmitter, in either line-of- sight, non-line-of-sight, or
obstructed-line-of-sight conditions.Comment: The manuscript has been revised, and increased from 27 to 31 pages.
Also, Fig.2, Fig. 10 and Table I are adde
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
Contributions to channel modelling and performance estimation of HAPS-based communication systems regarding IEEE Std 802.16TM
New and future telecommunication networks are and will be broadband type. The existing terrestrial and space radio communication infrastructures might be supplemented by new wireless networks that make and will make use of aeronautics-technology. Our study/contribution is referring to radio communications based on radio stations aboard a stratospheric platform named, by ITU-R, HAPS (High Altitude Platform Station). These new networks have been proposed as an alternative technology within the ITU framework to provide various narrow/broadband communication services.
With the possibility of having a payload for Telecommunications in an aircraft or a balloon (HAPS), it can be carried out radio communications to provide backbone connections on ground and to access to broadband points for ground terminals. The latest implies a complex radio network planning. Therefore, the radio coverage analysis at outdoors and indoors becomes an important issue on the design of new radio systems.
In this doctoral thesis, the contribution is related to the HAPS application for terrestrial fixed broadband communications. HAPS was hypothesised as a quasi-static platform with height above ground at the so-called stratospheric layer. Latter contribution was fulfilled by approaching via simulations the outdoor-indoor coverage with a simple efficient computational model at downlink mode.
This work was assessing the ITU-R recommendations at bands recognised for the HAPS-based networks. It was contemplated the possibility of operating around 2 GHz (1820 MHz, specifically) because this band is recognised as an alternative for HAPS networks that can provide IMT-2000 and IMT-Advanced services.
The global broadband radio communication model was composed of three parts: transmitter, channel, and receiver. The transmitter and receiver parts were based on the specifications of the IEEE Std 802.16TM-2009 (with its respective digital transmission techniques for a robust-reliable link), and the channel was subjected to the analysis of radio modelling at the level of HAPS and terrestrial (outdoors plus indoors) parts.
For the channel modelling was used the two-state characterisation (physical situations associated with the transmitted/received signals), the state-oriented channel modelling. One of the channel-state contemplated the environmental transmission situation defined by a direct path between transmitter and receiver, and the remaining one regarded the conditions of shadowing. These states were dependent on the elevation angle related to the ray-tracing analysis: within the propagation environment, it was considered that a representative portion of the total energy of the signal was received by a direct or diffracted wave, and the remaining power signal was coming by a specular wave, to last-mentioned waves (rays) were added the scattered and random rays that constituted the diffuse wave.
At indoors case, the variations of the transmitted signal were also considering the following matters additionally: the building penetration, construction material, angle of incidence, floor height, position of terminal in the room, and indoor fading; also, these indoors radiocommunications presented different type of paths to reach the receiver: obscured LOS, no LOS (NLOS), and hard NLOS.
The evaluation of the feasible performance for the HAPS-to-ground terminal was accomplished by means of thorough simulations. The outcomes of the experiment were presented in terms of BER vs. Eb/N0 plotting, getting significant positive conclusions for these kind of system as access network technology based on HAPS
Spectrum Leasing as an Incentive towards Uplink Macrocell and Femtocell Cooperation
The concept of femtocell access points underlaying existing communication
infrastructure has recently emerged as a key technology that can significantly
improve the coverage and performance of next-generation wireless networks. In
this paper, we propose a framework for macrocell-femtocell cooperation under a
closed access policy, in which a femtocell user may act as a relay for
macrocell users. In return, each cooperative macrocell user grants the
femtocell user a fraction of its superframe. We formulate a coalitional game
with macrocell and femtocell users being the players, which can take individual
and distributed decisions on whether to cooperate or not, while maximizing a
utility function that captures the cooperative gains, in terms of throughput
and delay.We show that the network can selforganize into a partition composed
of disjoint coalitions which constitutes the recursive core of the game
representing a key solution concept for coalition formation games in partition
form. Simulation results show that the proposed coalition formation algorithm
yields significant gains in terms of average rate per macrocell user, reaching
up to 239%, relative to the non-cooperative case. Moreover, the proposed
approach shows an improvement in terms of femtocell users' rate of up to 21%
when compared to the traditional closed access policy.Comment: 29 pages, 11 figures, accepted at the IEEE JSAC on Femtocell Network
Antennas and Propagation of Implanted RFIDs for Pervasive Healthcare Applications
© 2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted
components of this work in other works.This post-acceptance version of the paper is essentially complete, but may differ from the official copy of record, which can be found at the following web location (subscription required to access full paper): http://dx.doi.org/10.1109/JPROC.2010.205101
- …