Error resilience and concealment techniques for high-efficiency video coding

This thesis investigates the problem of robust coding and error concealment in High Efficiency Video Coding (HEVC). After a review of the current state of the art, a simulation study about error robustness, revealed that the HEVC has weak protection against network losses with significant impact on video quality degradation. Based on this evidence, the first contribution of this work is a new method to reduce the temporal dependencies between motion vectors, by improving the decoded video quality without compromising the compression efficiency. The second contribution of this thesis is a two-stage approach for reducing the mismatch of temporal predictions in case of video streams received with errors or lost data. At the encoding stage, the reference pictures are dynamically distributed based on a constrained Lagrangian rate-distortion optimization to reduce the number of predictions from a single reference. At the streaming stage, a prioritization algorithm, based on spatial dependencies, selects a reduced set of motion vectors to be transmitted, as side information, to reduce mismatched motion predictions at the decoder. The problem of error concealment-aware video coding is also investigated to enhance the overall error robustness. A new approach based on scalable coding and optimally error concealment selection is proposed, where the optimal error concealment modes are found by simulating transmission losses, followed by a saliency-weighted optimisation. Moreover, recovery residual information is encoded using a rate-controlled enhancement layer. Both are transmitted to the decoder to be used in case of data loss. Finally, an adaptive error resilience scheme is proposed to dynamically predict the video stream that achieves the highest decoded quality for a particular loss case. A neural network selects among the various video streams, encoded with different levels of compression efficiency and error protection, based on information from the video signal, the coded stream and the transmission network. Overall, the new robust video coding methods investigated in this thesis yield consistent quality gains in comparison with other existing methods and also the ones implemented in the HEVC reference software. Furthermore, the trade-off between coding efficiency and error robustness is also better in the proposed methods

Error concealment techniques for H.264/MVC encoded sequences

This work is partially funded by the Strategic Educational Pathways Scholarship Scheme (STEPS-Malta). This scholarship is partly financed by the European Union–European Social Fund (ESF 1.25).The H.264/MVC standard offers good compression ratios for multi-view sequences by exploiting spatial, temporal and interview image dependencies. This works well in error-free channels, however in the event of transmission errors, it leads to the propagation of the distorted macro-blocks, degrading the quality of experience of the user. This paper reviews the state-of-the-art error concealment solutions and proposes a low complexity concealment method that can be used with multi-view video coding. The error resilience techniques used to aid error concealment are also identified. Results obtained demonstrate that good multi-view video reconstruction can be obtained with this approach.peer-reviewe

Multimedia over wireless ip networks:distortion estimation and applications.

2006/2007This thesis deals with multimedia communication over unreliable and resource constrained IP-based packet-switched networks. The focus is on estimating, evaluating and enhancing the quality of streaming media services with particular regard to video services. The original contributions of this study involve mainly the development of three video distortion estimation techniques and the successive definition of some application scenarios used to demonstrate the benefits obtained applying such algorithms. The material presented in this dissertation is the result of the studies performed within the Telecommunication Group of the Department of Electronic Engineering at the University of Trieste during the course of Doctorate in Information Engineering. In recent years multimedia communication over wired and wireless packet based networks is exploding. Applications such as BitTorrent, music file sharing, multimedia podcasting are the main source of all traffic on the Internet. Internet radio for example is now evolving into peer to peer television such as CoolStreaming. Moreover, web sites such as YouTube have made publishing videos on demand available to anyone owning a home video camera. Another challenge in the multimedia evolution is inside the house where videos are distributed over local WiFi networks to many end devices around the house. More in general we are assisting an all media over IP revolution, with radio, television, telephony and stored media all being delivered over IP wired and wireless networks. All the presented applications require an extreme high bandwidth and often a low delay especially for interactive applications. Unfortunately the Internet and the wireless networks provide only limited support for multimedia applications. Variations in network conditions can have considerable consequences for real-time multimedia applications and can lead to unsatisfactory user experience. In fact, multimedia applications are usually delay sensitive, bandwidth intense and loss tolerant applications. In order to overcame this limitations, efficient adaptation mechanism must be derived to bridge the application requirements with the transport medium characteristics. Several approaches have been proposed for the robust transmission of multimedia packets; they range from source coding solutions to the addition of redundancy with forward error correction and retransmissions. Additionally, other techniques are based on developing efficient QoS architectures at the network layer or at the data link layer where routers or specialized devices apply different forwarding behaviors to packets depending on the value of some field in the packet header. Using such network architecture, video packets are assigned to classes, in order to obtain a different treatment by the network; in particular, packets assigned to the most privileged class will be lost with a very small probability, while packets belonging to the lowest priority class will experience the traditional best–effort service. But the key problem in this solution is how to assign optimally video packets to the network classes. One way to perform the assignment is to proceed on a packet-by-packet basis, to exploit the highly non-uniform distortion impact of compressed video. Working on the distortion impact of each individual video packet has been shown in recent years to deliver better performance than relying on the average error sensitivity of each bitstream element. The distortion impact of a video packet can be expressed as the distortion that would be introduced at the receiver by its loss, taking into account the effects of both error concealment and error propagation due to temporal prediction. The estimation algorithms proposed in this dissertation are able to reproduce accurately the distortion envelope deriving from multiple losses on the network and the computational complexity required is negligible in respect to those proposed in literature. Several tests are run to validate the distortion estimation algorithms and to measure the influence of the main encoder-decoder settings. Different application scenarios are described and compared to demonstrate the benefits obtained using the developed algorithms. The packet distortion impact is inserted in each video packet and transmitted over the network where specialized agents manage the video packets using the distortion information. In particular, the internal structure of the agents is modified to allow video packets prioritization using primarily the distortion impact estimated by the transmitter. The results obtained will show that, in each scenario, a significant improvement may be obtained with respect to traditional transmission policies. The thesis is organized in two parts. The first provides the background material and represents the basics of the following arguments, while the other is dedicated to the original results obtained during the research activity. Referring to the first part in the first chapter it summarized an introduction to the principles and challenges for the multimedia transmission over packet networks. The most recent advances in video compression technologies are detailed in the second chapter, focusing in particular on aspects that involve the resilience to packet loss impairments. The third chapter deals with the main techniques adopted to protect the multimedia flow for mitigating the packet loss corruption due to channel failures. The fourth chapter introduces the more recent advances in network adaptive media transport detailing the techniques that prioritize the video packet flow. The fifth chapter makes a literature review of the existing distortion estimation techniques focusing mainly on their limitation aspects. The second part of the thesis describes the original results obtained in the modelling of the video distortion deriving from the transmission over an error prone network. In particular, the sixth chapter presents three new distortion estimation algorithms able to estimate the video quality and shows the results of some validation tests performed to measure the accuracy of the employed algorithms. The seventh chapter proposes different application scenarios where the developed algorithms may be used to enhance quickly the video quality at the end user side. Finally, the eight chapter summarizes the thesis contributions and remarks the most important conclusions. It also derives some directions for future improvements. The intent of the entire work presented hereafter is to develop some video distortion estimation algorithms able to predict the user quality deriving from the loss on the network as well as providing the results of some useful applications able to enhance the user experience during a video streaming session.Questa tesi di dottorato affronta il problema della trasmissione efficiente di contenuti multimediali su reti a pacchetto inaffidabili e con limitate risorse di banda. L’obiettivo è quello di ideare alcuni algoritmi in grado di predire l’andamento della qualità del video ricevuto da un utente e successivamente ideare alcune tecniche in grado di migliorare l’esperienza dell’utente finale nella fruizione dei servizi video. In particolare i contributi originali del presente lavoro riguardano lo sviluppo di algoritmi per la stima della distorsione e l’ideazione di alcuni scenari applicativi in molto frequenti dove poter valutare i benefici ottenibili applicando gli algoritmi di stima. I contributi presentati in questa tesi di dottorato sono il risultato degli studi compiuti con il gruppo di Telecomunicazioni del Dipartimento di Elettrotecnica Elettronica ed Informatica (DEEI) dell’Università degli Studi di Trieste durante il corso di dottorato in Ingegneria dell’Informazione. Negli ultimi anni la multimedialità, diffusa sulle reti cablate e wireless, sta diventando parte integrante del modo di utilizzare la rete diventando di fatto il fenomeno più imponente. Applicazioni come BitTorrent, la condivisione di file musicali e multimediali e il podcasting ad esempio costituiscono una parte significativa del traffico attuale su Internet. Quelle che negli ultimi anni erano le prime radio che trsmettevano sulla rete oggi si stanno evolvendo nei sistemi peer to peer per più avanzati per la diffusione della TV via web come CoolStreaming. Inoltre siti web come YouTube hanno costruito il loro business sulla memorizzazione/ distribuzione di video creati da chiunque abbia una semplice video camera. Un’altra caratteristica dell’imponente rivoluzione multimediale a cui stiamo assistendo è la diffusione dei video anche all’interno delle case dove i contenuti multimediali vengono distribuiti mediante delle reti wireless locali tra i vari dispositivi finali. Tutt’oggi è in corso una rivoluzione della multimedialità sulle reti IP con le radio, i televisioni, la telefonia e tutti i video che devono essere distribuiti sulle reti cablate e wireless verso utenti eterogenei. In generale la gran parte delle applicazioni multimediali richiedono una banda elevata e dei ritardi molto contenuti specialmente se le applicazioni sono di tipo interattivo. Sfortunatamente le reti wireless e Internet più in generale sono in grado di fornire un supporto limitato alle applicazioni multimediali. La variabilità di banda, di ritardo e nella perdita possono avere conseguenze gravi sulla qualità con cui viene ricevuto il video e questo può portare a una parziale insoddisfazione o addirittura alla rinuncia della fruizione da parte dell’utente finale. Le applicazioni multimediali sono spesso sensibili al ritardo e con requisiti di banda molto stringenti ma di fatto rimango tolleranti nei confronti delle perdite che possono avvenire durante la trasmissione. Al fine di superare le limitazioni è necessario sviluppare dei meccanismi di adattamento in grado di fare da ponte fra i requisiti delle applicazioni multimediali e le caratteristiche offerte dal livello di trasporto. Diversi approcci sono stati proposti in passato in letteratura per migliorare la trasmissione dei pacchetti riducendo le perdite; gli approcci variano dalle soluzioni di compressione efficiente all’aggiunta di ridondanza con tecniche di forward error correction e ritrasmissioni. Altre tecniche si basano sulla creazione di architetture di rete complesse in grado di garantire la QoS a livello rete dove router oppure altri agenti specializzati applicano diverse politiche di gestione del traffico in base ai valori contenuti nei campi dei pacchetti. Mediante queste architetture il traffico video viene marcato con delle classi di priorità al fine di creare una differenziazione nel traffico a livello rete; in particolare i pacchetti con i privilegi maggiori vengono assegnati alle classi di priorità più elevate e verranno persi con probabilità molto bassa mentre i pacchetti appartenenti alle classi di priorità inferiori saranno trattati alla stregua dei servizi di tipo best-effort. Uno dei principali problemi di questa soluzione riguarda come assegnare in maniera ottimale i singoli pacchetti video alle diverse classi di priorità. Un modo per effettuare questa classificazione è quello di procedere assegnando i pacchetti alle varie classi sulla base dell’importanza che ogni pacchetto ha sulla qualità finale. E’ stato dimostrato in numerosi lavori recenti che utilizzando come meccanismo per l’adattamento l’impatto sulla distorsione finale, porta significativi miglioramenti rispetto alle tecniche che utilizzano come parametro la sensibilità media del flusso nei confronti delle perdite. L’impatto che ogni pacchetto ha sulla qualità può essere espresso come la distorsione che viene introdotta al ricevitore se il pacchetto viene perso tenendo in considerazione gli effetti del recupero (error concealment) e la propagazione dell’errore (error propagation) caratteristica dei più recenti codificatori video. Gli algoritmi di stima della distorsione proposti in questa tesi sono in grado di riprodurre in maniera accurata l’inviluppo della distorsione derivante sia da perdite isolate che da perdite multiple nella rete con una complessità computazionale minima se confrontata con le più recenti tecniche di stima. Numerose prove sono stati effettuate al fine di validare gli algoritmi di stima e misurare l’influenza dei principali parametri di codifica e di decodifica. Al fine di enfatizzare i benefici ottenuti applicando gli algoritmi di stima della distorsione, durante la tesi verranno presentati alcuni scenari applicativi dove l’applicazione degli algoritmi proposti migliora sensibilmente la qualità finale percepita dagli utenti. Tali scenari verranno descritti, implementati e accuratamente valutati. In particolare, la distorsione stimata dal trasmettitore verrà incapsulata nei pacchetti video e, trasmessa nella rete dove agenti specializzati potranno agevolmente estrarla e utilizzarla come meccanismo rate-distortion per privilegiare alcuni pacchetti a discapito di altri. In particolare la struttura interna di un agente (un router) verrà modificata al fine di consentire la differenziazione del traffico utilizzando l’informazione dell’impatto che ogni pacchetto ha sulla qualità finale. I risultati ottenuti anche in termini di ridotta complessità computazionale in ogni scenario applicativo proposto mettono in luce i benefici derivanti dall’implementazione degli algoritmi di stima. La presenti tesi di dottorato è strutturata in due parti principali; la prima fornisce il background e rappresenta la base per tutti gli argomenti trattati nel seguito mentre la seconda parte è dedicata ai contributi originali e ai risultati ottenuti durante l’intera attività di ricerca. In riferimento alla prima parte in particolare un’introduzione ai principi e alle opportunità offerte dalla diffusione dei servizi multimediali sulle reti a pacchetto viene esposta nel primo capitolo. I progressi più recenti nelle tecniche di compressione video vengono esposti dettagliatamente nel secondo capitolo che si focalizza in particolare solo sugli aspetti che riguardano le tecniche per la mitigazione delle perdite. Il terzo capitolo introduce le principali tecniche per proteggere i flussi multimediali e ridurre le perdite causate dai fenomeni caratteristici del canale. Il quarto capitolo descrive i recenti avanzamenti nelle tecniche di network adaptive media transport illustrando i principali metodi utilizzati per differenziare il traffico video. Il quinto capitolo analizza i principali contributi nella letteratura sulle tecniche di stima della distorsione e si focalizza in particolare sulle limitazioni dei metodi attuali. La seconda parte della tesi descrive i contributi originali ottenuti nella modellizzazione della distorsione video derivante dalla trasmissione sulle reti con perdite. In particolare il sesto capitolo presenta tre nuovi algoritmi in grado di riprodurre fedelmente l’inviluppo della distorsione video. I numerosi test e risultati verranno proposti al fine di validare gli algoritmi e misurare l’accuratezza nella stima. Il settimo capitolo propone diversi scenari applicativi dove gli algoritmi sviluppati possono essere utilizzati per migliorare in maniera significativa la qualità percepita dall’utente finale. Infine l’ottavo capitolo sintetizza l’intero lavoro svolto e i principali risultati ottenuti. Nello stesso capitolo vengono inoltre descritti gli sviluppi futuri dell’attività di ricerca. L’obiettivo dell’intero lavoro presentato è quello di mostrare i benefici derivanti dall’utilizzo di nuovi algoritmi per la stima della distorsione e di fornire alcuni scenari applicativi di utilizzo.XIX Ciclo197

Error control strategies in H.265|HEVC video transmission

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonWith the rapid development in video coding technologies in the last decade, high-resolution video delivery suffers from packet loss due to unreliable transmission channels (time-varying characteristics). The error Resilience approaches at channel coding level are less efficient to implement in real time video transmission as the encoded video samples are in variable code length. Therefore, error resilience in video coding standard plays a vital role to reduce the effect of error propagation and improve the perceived visual quality. The main work in this thesis is to develop an efficient error resilience mechanism for H.265|HEVC video coding standard to reduce the effects of error propagation in error-prone conditions. In this thesis, two error resilience algorithms are proposed. The first one is Adaptive Slice Encoding (ASE) error resilience algorithm. The concept of this algorithm is to extract and protect the most active slices in the coded bitstream based on the adaptive search window. This algorithm can be applied in low delay video transmission with and without using a feedback channel. It is also designed to be compatible with reference coding software manual (HM16) for H.265|HEVC coding standard. The second proposed algorithm is a joint encoder-decoder error resilience called Error resilience based on Supplemental Enhancement Information (ERSEI) algorithm. A feedback message status is used from the decoder to notify the encoder to start encoding clean random-access picture adaptively based on the decoded picture hash message status from the decoder. At the same time, the decoder will be notified to start the error concealment process whilst waiting to receive correct video data. A recovery point message from the decoder feedback channel is used to update the encoder with error messages. In this thesis, extensive experimental work, evaluation, and comparison with state-of-the-art related algorithms have been conducted to evaluate the proposed algorithms. Furthermore, the best trade-off between the coding efficiency of the proposed error resilience algorithms and error resilience performance has been considered at the design stage. The experimental work evaluation includes both encoding conditions, i.e. error-free and error-prone. The results achieved from the experiments show significant improvements, in (Y-PSNR) results and subjective quality of the decoded bitstream, using the proposed algorithm in error-prone conditions with a variety of packet loss rates. Moreover, experimental work is conducted to test the algorithms complexity in terms of required processing execution time at both encoding and decoding stages. Additionally, the video coding standard performance for both H.264|AVC and H.265|HEVC coding standards are evaluated in error-free and error-prone environments. For ASE algorithm and when compared with improved region of interest (IROI) and region of interest (ROI) algorithms, a significant improvement in visual quality was the most obvious finding from the obtained results with PLRs of 2-18 (%). For ERSEI algorithm and when compared with the default HM16 with pixel copy concealment and motion compensated error concealment (MCEC) techniques, the evaluation results indicate clear visual quality enhancement under different packet loss rates PLRs (1,2 6, 8) %.The Ministry of Higher Education and Scientific Research in Ira

Multimedia streaming over wireless channels

The improvements in mobile communication systems have accelerated the development of new multimedia streaming techniques to increase the quality of streaming data over time varying wireless channels. In order to increase multimedia quality, error control schemes are indispensable due to time-varying and erroneous nature of the channel. However, relatively low channel capacity of wireless channels, and dependency structure in multimedia limit the eectiveness of existing error control schemes and require more sophisticated techniques to provide quality improvement on the streaming data. In this thesis, we propose sender driven multimedia streaming algorithms that incorporate error control schemes of FEC, ARQ, and packet scheduling by considering media and channel parameters such as packet importance, packet dependencies, decoding deadlines, channel state information, and channel capacity. Initially, we have proposed a multi-rate distortion optimization framework so as to jointly optimize FEC rate and packet selection by minimizing end-to-end distortion to satisfy a specified Quality of Service under channel capacity constraint. Minimization of end-to-end distortion causes computational complexity in the rate distortion optimization framework due to dependency in encoded multimedia. Therefore, we propose multimedia streaming algorithms that select packet and FEC rate with reduced computational complexity and high quality as compared with multi-rate distortion optimization framework. Additionally, protocol stack of a UMTS cellular network system with W-CDMA air interface is presented in order to clarify the relation between proposed multimedia streaming algorithms and UMTS system that is used in simulations. Finally, proposed algorithms are simulated and results demonstrate that proposed algorithms improve multimedia quality significantly as compared to existing methods

Error-resilient multi-view video plus depth based 3-D video coding

Three Dimensional (3-D) video, by definition, is a collection of signals that can provide depth perception of a 3-D scene. With the development of 3-D display technologies and interactive multimedia systems, 3-D video has attracted significant interest from both industries and academia with a variety of applications. In order to provide desired services in various 3-D video applications, the multiview video plus depth (MVD) representation, which can facilitate the generation of virtual views, has been determined to be the best format for 3-D video data. Similar to 2-D video, compressed 3-D video is highly sensitive to transmission errors due to errors propagated from the current frame to the future predicted frames. Moreover, since the virtual views required for auto-stereoscopic displays are rendered from the compressed texture videos and depth maps, transmission errors of the distorted texture videos and depth maps can be further propagated to the virtual views. Besides, the distortions in texture and depth show different effects on the rendering views. Therefore, compared to the reliability of the transmission of the 2-D video, error-resilient texture video and depth map coding are facing major new challenges. This research concentrates on improving the error resilience performance of MVD-based 3-D video in packet loss scenarios. Based on the analysis of the propagating behaviour of transmission errors, a Wyner-Ziv (WZ)-based error-resilient algorithm is first designed for coding of the multi-view video data or depth data. In this scheme, an auxiliary redundant stream encoded according to WZ principle is employed to protect a primary stream encoded with standard multi-view video coding codec. Then, considering the fact that different combinations of texture and depth coding mode will exhibit varying robustness to transmission errors, a rate-distortion optimized mode switching scheme is proposed to strike the optimal trade-off between robustness and compression effciency. In this approach, the texture and depth modes are jointly optimized by minimizing the overall distortion of both the coded and synthesized views subject to a given bit rate. Finally, this study extends the research on the reliable transmission of view synthesis prediction (VSP)-based 3-D video. In order to mitigate the prediction position error caused by packet losses in the depth map, a novel disparity vector correction algorithm is developed, where the corrected disparity vector is calculated from the depth error. To facilitate decoder error concealment, the depth error is recursively estimated at the decoder. The contributions of this dissertation are multifold. First, the proposed WZbased error-resilient algorithm can accurately characterize the effect of transmission error on multi-view distortion at the transform domain in consideration of both temporal and inter-view error propagation, and based on the estimated distortion, this algorithm can perform optimal WZ bit allocation at the encoder through explicitly developing a sophisticated rate allocation strategy. This proposed algorithm is able to provide a finer granularity in performing rate adaptivity and unequal error protection for multi-view data, not only at the frame level, but also at the bit-plane level. Secondly, in the proposed mode switching scheme, a new analytic model is formulated to optimally estimate the view synthesis distortion due to packet losses, in which the compound impact of the transmission distortions of both the texture video and the depth map on the quality of the synthesized view is mathematically analysed. The accuracy of this view synthesis distortion model is demonstrated via simulation results and, further, the estimated distortion is integrated into a rate-distortion framework for optimal mode switching to achieve substantial performance gains over state-of-the-art algorithms. Last, but not least, this dissertation provides a preliminary investigation of VSP-based 3-D video over unreliable channel. In the proposed disparity vector correction algorithm, the pixel-level depth map error can be precisely estimated at the decoder without the deterministic knowledge of the error-free reconstructed depth. The approximation of the innovation term involved in depth error estimation is proved theoretically. This algorithm is very useful to conceal the position-erroneous pixels whose disparity vectors are correctly received

Research and developments of Dirac video codec

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.In digital video compression, apart from storage, successful transmission of the compressed video data over the bandwidth limited erroneous channels is another important issue. To enable a video codec for broadcasting application, it is required to implement the corresponding coding tools (e.g. error-resilient coding, rate control etc.). They are normally non-normative parts of a video codec and hence their specifications are not defined in the standard. In Dirac as well, the original codec is optimized for storage purpose only and so, several non-normative part of the encoding tools are still required in order to be able to use in other types of application. Being the "Research and Developments of the Dirac Video Codec" as the research title, phase I of the project is mainly focused on the error-resilient transmission over a noisy channel. The error-resilient coding method used here is a simple and low complex coding scheme which provides the error-resilient transmission of the compressed video bitstream of Dirac video encoder over the packet erasure wired network. The scheme combines source and channel coding approach where error-resilient source coding is achieved by data partitioning in the wavelet transformed domain and channel coding is achieved through the application of either Rate-Compatible Punctured Convolutional (RCPC) Code or Turbo Code (TC) using un-equal error protection between header plus MV and data. The scheme is designed mainly for the packet-erasure channel, i.e. targeted for the Internet broadcasting application. But, for a bandwidth limited channel, it is still required to limit the amount of bits generated from the encoder depending on the available bandwidth in addition to the error-resilient coding. So, in the 2nd phase of the project, a rate control algorithm is presented. The algorithm is based upon the Quality Factor (QF) optimization method where QF of the encoded video is adaptively changing in order to achieve average bitrate which is constant over each Group of Picture (GOP). A relation between the bitrate, R and the QF, which is called Rate-QF (R-QF) model is derived in order to estimate the optimum QF of the current encoding frame for a given target bitrate, R. In some applications like video conferencing, real-time encoding and decoding with minimum delay is crucial, but, the ability to do real-time encoding/decoding is largely determined by the complexity of the encoder/decoder. As we all know that motion estimation process inside the encoder is the most time consuming stage. So, reducing the complexity of the motion estimation stage will certainly give one step closer to the real-time application. So, as a partial contribution toward realtime application, in the final phase of the research, a fast Motion Estimation (ME) strategy is designed and implemented. It is the combination of modified adaptive search plus semi-hierarchical way of motion estimation. The same strategy was implemented in both Dirac and H.264 in order to investigate its performance on different codecs. Together with this fast ME strategy, a method which is called partial cost function calculation in order to further reduce down the computational load of the cost function calculation was presented. The calculation is based upon the pre-defined set of patterns which were chosen in such a way that they have as much maximum coverage as possible over the whole block. In summary, this research work has contributed to the error-resilient transmission of compressed bitstreams of Dirac video encoder over a bandwidth limited error prone channel. In addition to this, the final phase of the research has partially contributed toward the real-time application of the Dirac video codec by implementing a fast motion estimation strategy together with partial cost function calculation idea.BBC R&D and Brunel University

Low Complexity Multiview Video Coding

3D video is a technology that has seen a tremendous attention in the recent years. Multiview Video Coding (MVC) is an extension of the popular H.264 video coding standard and is commonly used to compress 3D videos. It offers an improvement of 20% to 50% in compression efficiency over simulcast encoding of multiview videos using the conventional H.264 video coding standard. However, there are two important problems associated with it: (i) its superior compression performance comes at the cost of significantly higher computational complexity which hampers the real-world realization of MVC encoder in applications such as 3D live broadcasting and interactive Free Viewpoint Television (FTV), and (ii) compressed 3D videos can suffer from packet loss during transmission, which can degrade the viewing quality of the 3D video at the decoder. This thesis aims to solve these problems by presenting techniques to reduce the computational complexity of the MVC encoder and by proposing a consistent error concealment technique for frame losses in 3D video transmission. The thesis first analyses the complexity of the MVC encoder. It then proposes two novel techniques to reduce the complexity of motion and disparity estimation. The first method achieves complexity reduction in the disparity estimation process by exploiting the relationship between temporal levels, type of macroblocks and search ranges while the second method achieves it by exploiting the geometrical relation- ship between motion and disparity vectors in stereo frames. These two methods are then combined with other state-of-the-art methods in a unique framework where gains add up. Experimental results show that the proposed low-complexity framework can reduce the encoding time of the standard MVC encoder by over 93% while maintaining similar compression efficiency performance. The addition of new View Synthesis Prediction (VSP) modes to the MVC encoding framework improves the compression efficiency of MVC. However, testing additional modes comes at the cost of increased encoding complexity. In order to reduce the encoding complexity, the thesis, next, proposes a bayesian early mode decision technique for a VSP enhanced MVC coder. It exploits the statistical similarities between the RD costs of the VSP SKIP mode in neighbouring views to terminate the mode decision process early. Results indicate that the proposed technique can reduce the encoding time of the enhanced MVC coder by over 33% at similar compression efficiency levels. Finally, compressed 3D videos are usually required to be broadcast to a large number of users where transmission errors can lead to frame losses which can degrade the video quality at the decoder. A simple reconstruction of the lost frames can lead to inconsistent reconstruction of the 3D scene which may negatively affect the viewing experience of a user. In order to solve this problem, the thesis proposes, at the end, a consistency model for recovering frames lost during transmission. The proposed consistency model is used to evaluate inter-view and temporal consistencies while selecting candidate blocks for concealment. Experimental results show that the proposed technique is able to recover the lost frames with high consistency and better quality than two standard error concealment methods and a baseline technique based on the boundary matching algorithm

Cross-layer analysis for video transmission over COFDM-based wireless local area networks

EThOS - Electronic Theses Online ServiceGBUnited Kingdo