Técnicas de posicionamiento y localización en sistemas de comunicaciones móviles UMTS

[ES] Con la implantación de las redes de comunicaciones móviles de Tercera Generación (UMTS), se abre un nuevo abanico de posibilidades en cuanto al desarrollo de algoritmos para la gestión eficiente y optimización de recursos radio. Con el fin de llevar a cabo dicha gestión se hace imprescindible disponer de fuentes de información que permitan en cada momento distribuir y gestionar los recursos disponibles maximizando la capacidad de la red. El presente trabajo se centra en la localización de terminales móviles en base a parámetros de tiempo. La técnica que hace uso del parámetro RACH Propagation Delay se emplea como un estimador de la distancia entre la estación base y el terminal móvil, con un coste nulo en hardware. Adicionalmente, mediante la información obtenida en el receptor RAKE integrado en el Nodo B, se presenta una técnica se seguimiento de recursos radio, también con un coste cero de implementación hardware. Por último, se presenta una técnica de localización personal mediante GPS asistido por la red.[EN] With the advent of the Third Generation in Mobile Communications (UMTS), a new range of possibilities and resources become available for developing efficient network management and optimization radio algorithms. In order to carry out this task it is necessary to have at one¿s disposal the necessary sources of information for distributing and managing in real time the available resources in the network maximizing in this way the capacity. The aim of this document is to present some novel mobile location techniques based in time parameters. The technique based in a parameter known as RACH Propagation Delay is used as an estimator of the distance between the base station and the mobile equipment, implying a zero cost hardware solution. By using the information acquired from the RAKE receiver, which is integrated in the Node B, it is presented a technique for tracking mobiles implying a zero cost hardware solution too. Finally, a technique for personal location using the GPS network assistance is presented.Argiles Ortiz, D. (2008). Técnicas de posicionamiento y localización en sistemas de comunicaciones móviles UMTS. http://hdl.handle.net/10251/27131.Archivo delegad

Cell search in frequency division : duplex WCDMA networks.

Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2006.Wireless radio access technologies have been progressively evolving to meet the high data rate demands of consumers. The deployment and success of voice-based second generation networks were enabled through the use of the Global System for Mobile Communications (GSM) and the Interim Standard Code Division Multiple Access (lS-95 CDMA) networks. The rise of the high data rate third generation communication systems is realised by two potential wireless radio access networks, the Wideband Code Division Multiple Access (WCDMA) and the CDMA2000. These networks are based on the use of various types of codes to initiate, sustain and terminate the communication links. Moreover, different codes are used to separate the transmitting base stations. This dissertation focuses on base station identification aspects of the Frequency Division Duplex (FDD) WCDMA networks. Notwithstanding the ease of deployment of these networks, their asynchronous nature presents serious challenges to the designer of the receiver. One of the challenges is the identification of the base station identity by the receiver, a process called Cell Search. The receiver algorithms must therefore be robust to the hostile radio channel conditions, Doppler frequency shifts and the detrimental effects of carrier frequency offsets. The dissertation begins by discussing the structure and the generation of WCDMA base station data along with an examination of the effects of the carrier frequency offset. The various cell searching algorithms proposed in the literature are then discussed and a new algorithm that exploits the correlation length structure is proposed and the simulation results are presented. Another design challenge presented by WCDMA networks is the estimation of carrier frequency offset at the receiver. Carrier frequency offsets arise due to crystal oscillator inaccuracies at the receiver and their effect is realised when the voltage controlled oscillator at the receiver is not oscillating at the same carrier frequency as that of the transmitter. This leads to a decrease in the receiver acquisition performance. The carrier frequency offset has to be estimated and corrected before the decoding process can commence. There are different approaches in the literature to estimate and correct these offsets. The final part of the dissertation investigates the FFT based carrier frequency estimation techniques and presents a new method that reduces the estimation error

Convergence of packet communications over the evolved mobile networks; signal processing and protocol performance

In this thesis, the convergence of packet communications over the evolved mobile networks is studied. The Long Term Evolution (LTE) process is dominating the Third Generation Partnership Project (3GPP) in order to bring technologies to the markets in the spirit of continuous innovation. The global markets of mobile information services are growing towards the Mobile Information Society. The thesis begins with the principles and theories of the multiple-access transmission schemes, transmitter receiver techniques and signal processing algorithms. Next, packet communications and Internet protocols are referred from the IETF standards with the characteristics of mobile communications in the focus. The mobile network architecture and protocols bind together the evolved packet system of Internet communications to the radio access network technologies. Specifics of the traffic models are shortly visited for their statistical meaning in the radio performance analysis. Radio resource management algorithms and protocols, also procedures, are covered addressing their relevance for the system performance. Throughout these Chapters, the commonalities and differentiators of the WCDMA, WCDMA/HSPA and LTE are covered. The main outcome of the thesis is the performance analysis of the LTE technology beginning from the early discoveries to the analysis of various system features and finally converging to an extensive system analysis campaign. The system performance is analysed with the characteristics of voice over the Internet and best effort traffic of the Internet. These traffic classes represent the majority of the mobile traffic in the converged packet networks, and yet they are simple enough for a fair and generic analysis of technologies. The thesis consists of publications and inventions created by the author that proposed several improvements to the 3G technologies towards the LTE. In the system analysis, the LTE showed by the factor of at least 2.5 to 3 times higher system measures compared to the WCDMA/HSPA reference. The WCDMA/HSPA networks are currently available with over 400 million subscribers and showing increasing growth, in the meanwhile the first LTE roll-outs are scheduled to begin in 2010. Sophisticated 3G LTE mobile devices are expected to appear fluently for all consumer segments in the following years

Linear MMSE Receivers for Interference Suppression & Multipath Diversity Combining in Long-Code DS-CDMA Systems

This thesis studies the design and implementation of a linear minimum mean-square error (LMMSE) receiver in asynchronous bandlimited direct-sequence code-division multiple-access (DS-CDMA) systems that employ long-code pseudo-noise (PN) sequences and operate in multipath environments. The receiver is shown to be capable of multiple-access interference (MAI) suppression and multipath diversity combining without the knowledge of other users' signature sequences. It outperforms any other linear receiver by maximizing output signal-to-noise ratio (SNR) with the aid of a new chip filter which exploits the cyclostationarity of the received signal and combines all paths of the desired user that fall within its supported time span. This work is motivated by the shortcomings of existing LMMSE receivers which are either incompatible with long-code CDMA or constrained by limitations in the system model. The design methodology is based on the concept of linear/conjugate linear (LCL) filtering and satisfying the orthogonality conditions to achieve the LMMSE filter response. Moreover, the proposed LMMSE receiver addresses two drawbacks of the coherent Rake receiver, the industry's current solution for multipath reception. First, unlike the Rake receiver which uses the chip-matched filter (CMF) and treats interference as additive white Gaussian noise (AWGN), the LMMSE receiver suppresses interference by replacing the CMF with a new chip pulse filter. Second, in contrast to the Rake receiver which only processes a subset of strongest paths of the desired user, the LMMSE receiver harnesses the energy of all paths of the desired user that fall within its time support, at no additional complexity. The performance of the proposed LMMSE receiver is analyzed and compared with that of the coherent Rake receiver with probability of bit error, Pe, as the figure of merit. The analysis is based on the accurate improved Gaussian approximation (IGA) technique. Closed form conditional Pe expressions for both the LMMSE and Rake receivers are derived. Furthermore, it is shown that if quadriphase random spreading, moderate to large spreading factors, and pulses with small excess bandwidth are used, the widely-used standard Gaussian Approximation (SGA) technique becomes accurate even for low regions of Pe. Under the examined scenarios tailored towards current narrowband system settings, the LMMSE receiver achieves 60% gain in capacity (1. 8 dB in output SNR) over the selective Rake receiver. A third of the gain is due to interference suppression capability of the receiver while the rest is credited to its ability to collect the energy of the desired user diversified to many paths. Future wideband systems will yield an ever larger gain. Adaptive implementations of the LMMSE receiver are proposed to rid the receiver from dependence on the knowledge of multipath parameters. The adaptive receiver is based on a fractionally-spaced equalizer (FSE) whose taps are updated by an adaptive algorithm. Training-based, pilot-channel-aided (PCA), and blind algorithms are developed to make the receiver applicable to both forward and reverse links, with or without the presence of pilot signals. The blind algorithms are modified versions of the constant modulus algorithm (CMA) which has not been previously studied for long-code CDMA systems. Extensive simulation results are presented to illustrate the convergence behavior of the proposed algorithms and quantify their performance loss under various levels of MAI. Computational complexities of the algorithms are also discussed. These three criteria (performance loss, convergence rate, and computational complexity) determine the proper choice of an adaptive algorithm with respect to the requirements of the specific application in mind

Bit error rate estimation in WiMAX communications at vehicular speeds using Nakagami-m fading model

The wireless communication industry has experienced a rapid technological evolution from its basic first generation (1G) wireless systems to the latest fourth generation (4G) wireless broadband systems. Wireless broadband systems are becoming increasingly popular with consumers and the technological strength of 4G has played a major role behind the success of wireless broadband systems. The IEEE 802.16m standard of the Worldwide Interoperability for Microwave Access (WiMAX) has been accepted as a 4G standard by the Institute of Electrical and Electronics Engineers in 2011. The IEEE 802.16m is fully optimised for wireless communications in fixed environments and can deliver very high throughput and excellent quality of service. In mobile communication environments however, WiMAX consumers experience a graceful degradation of service as a direct function of vehicular speeds. At high vehicular speeds, the throughput drops in WiMAX systems and unless proactive measures such as forward error control and packet size optimisation are adopted and properly adjusted, many applications cannot be facilitated at high vehicular speeds in WiMAX communications. For any proactive measure, bit error rate estimation as a function of vehicular speed, serves as a useful tool. In this thesis, we present an analytical model for bit error rate estimation in WiMAX communications using the Nakagami-m fading model. We also show, through an analysis of the data collected from a practical WiMAX system, that the Nakagami-m model can be made adaptive as a function of speed, to represent fading in fixed environments as well as mobile environments

An Investigation into the Implementation and Performance of Spectrally Shaped Orthogonal Frequency Division Multiplex

Orthogonal Frequency Division Multiplex (OFDM) is a flexible, robust multi-carrier modulation scheme. The orthogonal spectral shaping and spacing of OFDM sub-carriers ensure that their spectra can be over-lapped without leading to undesirable inter-carrier interference. Conventional OFDM systems have non-band limited Sinc(x) shaped subcarrier spectra. An alternative form of OFDM, referred to hereafter as Spectrally Shaped OFDM, employs band limited Nyquist shaped sub-carrier spectra. The research described in this thesis investigates the strengths and weaknesses of Spectrally Shaped OFDM as a potential modulation scheme for future mobile radio applications. From this research a novel Digital Signal Processing architecture for modulating and demodulating Spectrally Shaped OFDM sub-carriers has been derived which exploits the combination of a complex Discrete Fourier Transform (DFT) and PolyPhase Network (PPN) filter. This architecture is shown to significantly reduce the minimum number of computations required per symbol compared to previous designs. Using a custom coded computer simulation, the effects of varying the key parameters of the novel architecture's PolyPhase Filter (PPN) filter an the overall system complexity, spectral performance and system signal-to-distortion have been extensively studied. From these studies it is shown that compared to similar conventional OFDM systems, Spectrally Shaped OFDM systems possess superior out-of-band spectral qualities but significantly worse Peak-to-Average-Power-Ratio (PAPR) envelope performance. lt is also shown that the absolute value of the end PPN filter coefficients (dependent on the roll-off factor of the sub-carrier spectral shaping) dictate the system signal-to-distortion ratio when no time-domain windowing of the PPN filter coefficients is applied. Finally the effects of a both time and frequency selective fast fading channels on the modulation scheme's uncoded Bit Error Rate (BER) versus Signal-to-Noise (SNR) performance are simulated. The results obtained indicate that Spectrally Shaped OFDM is more robust (lower BER) to frequency-selective fading than time-selective fading

Architecture and Analysis for Next Generation Mobile Signal Processing.

Mobile devices have proliferated at a spectacular rate, with more than 3.3 billion active cell phones in the world. With sales totaling hundreds of billions every year, the mobile phone has arguably become the dominant computing platform, replacing the personal computer. Soon, improvements to today’s smart phones, such as high-bandwidth internet access, high-definition video processing, and human-centric interfaces that integrate voice recognition and video-conferencing will be commonplace. Cost effective and power efficient support for these applications will be required. Looking forward to the next generation of mobile computing, computation requirements will increase by one to three orders of magnitude due to higher data rates, increased complexity algorithms, and greater computation diversity but the power requirements will be just as stringent to ensure reasonable battery lifetimes. The design of the next generation of mobile platforms must address three critical challenges: efficiency, programmability, and adaptivity. The computational efficiency of existing solutions is inadequate and straightforward scaling by increasing the number of cores or the amount of data-level parallelism will not suffice. Programmability provides the opportunity for a single platform to support multiple applications and even multiple standards within each application domain. Programmability also provides: faster time to market as hardware and software development can proceed in parallel; the ability to fix bugs and add features after manufacturing; and, higher chip volumes as a single platform can support a family of mobile devices. Lastly, hardware adaptivity is necessary to maintain efficiency as the computational characteristics of the applications change. Current solutions are tailored specifically for wireless signal processing algorithms, but lose their efficiency when other application domains like high definition video are processed. This thesis addresses these challenges by presenting analysis of next generation mobile signal processing applications and proposing an advanced signal processing architecture to deal with the stringent requirements. An application-centric design approach is taken to design our architecture. First, a next generation wireless protocol and high definition video is analyzed and algorithmic characterizations discussed. From these characterizations, key architectural implications are presented, which form the basis for the advanced signal processor architecture, AnySP.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86344/1/mwoh_1.pd

Initial Synchronisation in the Multiple-Input Multiple-Output Aided Single- and Multi-Carrier DS-CDMA as well as DS-UWB Downlink

In this thesis, we propose and investigate code acquisition schemes employing both colocated and cooperative Multiple Input/Multiple Output (MIMO) aided Single-Carrier (SC) and Multi-Carrier (MC) Code Division Multiple Access (CDMA) DownLink (DL) schemes. We study their characteristics and performance in terms of both Non-Coherent (NC) and Differentially Coherent (DC) MIMO scenarios. Furthermore, we also propose iterative code acquisition schemes for the Direct Sequence-Ultra WideBand (DS-UWB) DL. There is a paucity of code acquisition techniques designed for transmit diversity aided systems. Moreover, there are no in-depth studies representing the fundamental characteristics of code acquisition schemes employing both co-located and cooperative MIMOs. Hence we investigate both NC and DC code acquisition schemes in the co-located and cooperative MIMO aided SC and MC DS-CDMA DL, when communicating over spatially uncorrelated Rayleigh channels. The issues of NC initial and post-initial acquisition schemes as well as DC schemes are studied as a function of the number of co-located antennas by quantifying the attainable correct detection probability and mean acquisition time performances. The research of DS-UWB systems has recently attracted a significant interest in both the academic and industrial community. In the DS-UWB DL, initial acquisition is required for both coarse timing as well as code phase alignment. Both of these constitute a challenging problem owing to the extremely short chip-duration of UWB systems. This leads to a huge acquisition search space size, which is represented as the product of the number of legitimate code phases in the uncertainty region of the PN code and the number of legitimate signalling pulse positions. Therefore the benefits of the iterative code acquisition schemes are analysed in terms of the achievable correct detection probability and mean acquisition time performances. Hence we significantly reduce the search space size with the aid of a Tanner graph based Message Passing (MP) technique, which is combined with the employment of beneficially selected generator polynomials, multiple receive antennas and appropriately designed multiple-component decoders. Finally, we characterise a range of two-stage iterative acquisition schemes employing iterative MP designed for a multiple receive antenna assisted DS-UWB DL scenario

Design and Implementation of Software Defined Radios on a Homogeneous Multi-Processor Architecture

In the wireless communications domain, multi-mode and multi-standard platforms are becoming increasingly the central focus of system architects. In fact, mobile terminal users require more and more mobility and throughput, pushing towards a fully integrated radio system able to support different communication protocols running concurrently on the platform. A new concept of radio system was introduced to meet the users' expectations. Flexible radio platforms have became an indispensable requirement to meet the expectations of the users today and in the future. This thesis deals with issues related to the design of flexible radio platforms. In particular, the flexibility of the radio system is achieved through the concept of software defined radios (SDRs). The research work focuses on the utilization of homogeneous multi-processor (MP) architectures as a feasible way to efficiently implement SDR platforms. In fact, platforms based on MP architectures are able to deliver high performance together with a high degree of flexibility. Moreover, homogeneous MP platforms are able to reduce design and verification costs as well as provide a high scalability in terms of software and hardware. However, homogeneous MP architectures provide less computational efficiency when compared to heterogeneous solutions. This thesis can be divided into two parts: the first part is related to the implementation of a reference platform while the second part of the thesis introduces the design and implementation of flexible, high performance, power and energy efficient algorithms for wireless communications. The proposed reference platform, Ninesilica, is a homogeneous MP architecture composed of a 3x3 mesh of processing nodes (PNs), interconnected by a hierarchical Network-on-Chip (NoC). Each PN hosts as Processing Element (PE) a processor core. To improve the computational efficiency of the platform, different power and energy saving techniques have been investigated. In the design, implementation and mapping of the algorithms, the following constraints were considered: energy and power efficiency, high scalability of the platform, portability of the solutions across similar platforms, and parallelization efficiency. Ninesilica architecture together with the proposed algorithm implementations showed that homogeneous MP architectures are highly scalable platforms, both in terms of hardware and software. Furthermore, Ninesilica architecture demonstrated that homogeneous MPs are able to achieve high parallelization efficiency as well as high energy and power savings, meeting the requirements of SDRs as well as enabling cognitive radios. Ninesilica can be utilized as a stand-alone block or as an elementary building block to realize clustered many-core architectures. Moreover, the obtained results, in terms of parallelization efficiency as well as power and energy efficiency are independent of the type of PE utilized, ensuring the portability of the results to similar architectures based on a different type of processing element