56 research outputs found
Process and Temperature Compensated Wideband Injection Locked Frequency Dividers and their Application to Low-Power 2.4-GHz Frequency Synthesizers
There has been a dramatic increase in wireless awareness among the user community in the past five years. The 2.4-GHz Industrial, Scientific and Medical (ISM) band is being used for a diverse range of applications due to the following reasons. It is the only unlicensed band approved worldwide and it offers more bandwidth and supports higher data rates compared to the 915-MHz ISM band. The power consumption of devices utilizing the 2.4-GHz band is much lower compared to the 5.2-GHz ISM band. Protocols like Bluetooth and Zigbee that utilize the 2.4-GHz ISM band are becoming extremely popular.
Bluetooth is an economic wireless solution for short range connectivity between PC, cell phones, PDAs, Laptops etc. The Zigbee protocol is a wireless technology that was developed as an open global standard to address the unique needs of low-cost, lowpower, wireless sensor networks. Wireless sensor networks are becoming ubiquitous, especially after the recent terrorist activities. Sensors are employed in strategic locations for real-time environmental monitoring, where they collect and transmit data frequently to a nearby terminal. The devices operating in this band are usually compact and battery powered. To enhance battery life and avoid the cumbersome task of battery replacement, the devices used should consume extremely low power. Also, to meet the growing demands cost and sized has to be kept low which mandates fully monolithic implementation using low cost process.
CMOS process is extremely attractive for such applications because of its low cost and the possibility to integrate baseband and high frequency circuits on the same chip. A fully integrated solution is attractive for low power consumption as it avoids the need for power hungry drivers for driving off-chip components. The transceiver is often the most power hungry block in a wireless communication system. The frequency divider (prescaler) and the voltage controlled oscillator in the transmitter’s frequency synthesizer are among the major sources of power consumption. There have been a number of publications in the past few decades on low-power high-performance VCOs. Therefore this work focuses on prescalers.
A class of analog frequency dividers called as Injection-Locked Frequency Dividers (ILFD) was introduced in the recent past as low power frequency division. ILFDs can consume an order of magnitude lower power when compared to conventional flip-flop based dividers. However the range of operation frequency also knows as the locking range is limited. ILFDs can be classified as LC based and Ring based. Though LC based are insensitive to process and temperature variation, they cannot be used for the 2.4-GHz ISM band because of the large size of on-chip inductors at these frequencies. This causes a lot of valuable chip area to be wasted. Ring based ILFDs are compact and provide a low power solution but are extremely sensitive to process and temperature variations. Process and temperature variation can cause ring based ILFD to loose lock in the desired operating band.
The goal of this work is to make the ring based ILFDs useful for practical applications. Techniques to extend the locking range of the ILFDs are discussed. A novel and simple compensation technique is devised to compensate the ILFD and keep the locking range tight with process and temperature variations. The proposed ILFD is used in a 2.4-GHz frequency synthesizer that is optimized for fractional-N synthesis. Measurement results supporting the theory are provided
Design of frequency synthesizers for short range wireless transceivers
The rapid growth of the market for short-range wireless devices, with standards such as Bluetooth and Wireless LAN (IEEE 802.11) being the most important, has created a need for highly integrated transceivers that target drastic power and area reduction while providing a high level of integration. The radio section of the devices designed to establish communications using these standards is the limiting factor for the power reduction efforts. A key building block in a transceiver is the frequency synthesizer, since it operates at the highest frequency of the system and consumes a very large portion of the total power in the radio. This dissertation presents the basic theory and a design methodology of frequency synthesizers targeted for short-range wireless applications. Three different examples of synthesizers are presented. First a frequency synthesizer integrated in a Bluetooth receiver fabricated in 0.35μm CMOS technology. The receiver uses a low-IF architecture to downconvert the incoming Bluetooth signal to 2MHz. The second synthesizer is integrated within a dual-mode receiver capable of processing signals of the Bluetooth and Wireless LAN (IEEE 802.11b) standards. It is implemented in BiCMOS technology and operates the voltage controlled oscillator at twice the required frequency to generate quadrature signals through a divide-by-two circuit. A phase switching prescaler is featured in the synthesizer. A large capacitance is integrated on-chip using a capacitance multiplier circuit that provides a drastic area reduction while adding a negligible phase noise contribution. The third synthesizer is an extension of the second example. The operation range of the VCO is extended to cover a frequency band from 4.8GHz to 5.85GHz. By doing this, the synthesizer is capable of generating LO signals for Bluetooth and IEEE 802.11a, b and g standards. The quadrature output of the 5 - 6 GHz signal is generated through a first order RC - CR network with an automatic calibration loop. The loop uses a high frequency phase detector to measure the deviation from the 90° separation between the I and Q branches and implements an algorithm to minimize the phase errors between the I and Q branches and their differential counterparts
Design of high performance frequency synthesizers in communication systems
Frequency synthesizer is a key building block of fully-integrated wireless communication
systems. Design of a frequency synthesizer requires the understanding of
not only the circuit-level but also of the transceiver system-level considerations. This
dissertation presents a full cycle of the synthesizer design procedure starting from the
interpretation of standards to the testing and measurement results.
A new methodology of interpreting communication standards into low level circuit
specifications is developed to clarify how the requirements are calculated. A
detailed procedure to determine important design variables is presented incorporating
the fundamental theory and non-ideal effects such as phase noise and reference
spurs. The design procedure can be easily adopted for different applications.
A BiCMOS frequency synthesizer compliant for both wireless local area network
(WLAN) 802.11a and 802.11b standards is presented as a design example. The two
standards are carefully studied according to the proposed standard interpretation
method. In order to satisfy stringent requirements due to the multi-standard architecture,
an improved adaptive dual-loop phase-locked loop (PLL) architecture is
proposed. The proposed improvements include a new loop filter topology with an
active capacitance multiplier and a tunable dead zone circuit. These improvements
are crucial for monolithic integration of the synthesizer with no off-chip components.
The proposed architecture extends the operation limit of conventional integerN type synthesizers by providing better reference spur rejection and settling time
performance while making it more suitable for monolithic integration. It opens a
new possibility of using an integer-N architecture for various other communication
standards, while maintaining the benefit of the integer-N architecture; an optimal
performance in area and power consumption
Recommended from our members
CMOS Signal Synthesizers for Emerging RF-to-Optical Applications
The need for clean and powerful signal generation is ubiquitous, with applications spanning the spectrum from RF to mm-Wave, to into and beyond the terahertz-gap. RF applications including mobile telephony and microprocessors have effectively harnessed mixed-signal integration in CMOS to realize robust on-chip signal sources calibrated against adverse ambient conditions. Combined with low cost and high yield, the CMOS component of hand-held devices costs a few cents per part per million parts. This low cost, and integrated digital processing, make CMOS an attractive option for applications like high-resolution imaging and ranging, and the emerging 5-G communication space. RADAR techniques when expanded to optical frequencies can enable micrometers of resolution for 3D imaging. These applications, however, impose upto 100x more exacting specifications on power and spectral purity at much higher frequencies than conventional RF synthesizers.
This generation of applications will present unconventional challenges for transistor technologies - whether it is to squeeze performance in the conventionally used spectrum, already wrung dry, or signal generation and system design in the relatively emptier mm-Wave to sub-mmWave spectrum, much of the latter falling in the ``Terahertz Gap". Indeed, transistor scaling and innovative device physics leading to new transistor topologies have yielded higher cut-off frequencies in CMOS, though still lagging well behind SiGe and III-V semiconductors. To avoid multimodule solutions with functionality partitioned across different technologies, CMOS must be pushed out of its comfort zone, and technology scaling has to have accompanying breakthroughs in design approaches not only at the system but also at the block level. In this thesis, while not targeting a specific application, we seek to formulate the obstacles in synthesizing high frequency, high power and low noise signals in CMOS and construct a coherent design methodology to address them. Based on this, three novel prototypes to overcome the limiting factors in each case are presented.
The first half of this thesis deals with high frequency signal synthesis and power generation in CMOS. Outside the range of frequencies where the transistor has gain, frequency generation necessitates harmonic extraction either as harmonic oscillators or as frequency multipliers. We augment the traditional maximum oscillation frequency metric (fmax), which only accounts for transistor losses, with passive component loss to derive an effective fmax metric. We then present a methodology for building oscillators at this fmax, the Maximum Gain Ring Oscillator. Next, we explore generating large signals beyond fmax through harmonic extraction in multipliers. Applying concepts of waveform shaping, we demonstrate a Power Mixer that engineers transistor nonlinearity by manipulating the amplitudes and relative phase shifts of different device nodes to maximize performance at a specific harmonic beyond device cut-off.
The second half proposes a new architecture for an ultra-low noise phase-locked loop (PLL), the Reference-Sampling PLL. In conventional PLLs, a noisy buffer converts the slow, low-noise sine-wave reference signal to a jittery square-wave clock against which the phase of a noisy voltage-controlled oscillator (VCO) is corrected. We eliminate this reference buffer, and measure phase error by sampling the reference sine-wave with the 50x faster VCO waveform already available on chip, and selecting the relevant sample with voltage proportional to phase error. By avoiding the N-squared multiplication of the high-power reference buffer noise, and directly using voltage-mode phase error to control the VCO, we eliminate several noisy components in the controlling loop for ultra-low integrated jitter for a given power consumption. Further, isolation of the VCO tank from any varying load, unlike other contemporary divider-less PLL architectures, results in an architecture with record performance in the low-noise and low-spur space.
We conclude with work that brings together concepts developed for clean, high-power signal generation towards a hybrid CMOS-Optical approach to Frequency-Modulated Continuous-Wave (FMCW) Light-Detection-And-Ranging (LIDAR). Cost-effective tunable lasers are temperature-sensitive and have nonlinear tuning profiles, rendering precise frequency modulations or 'chirps' untenable. Locking them to an electronic reference through an electro-optic PLL, and electronically calibrating the control signal for nonlinearity and ambient sensitivity, can make such chirps possible. Approaches that build on the body of advances in electrical PLLs to control the performance, and ease the specification on the design of optical systems are proposed. Eventually, we seek to leverage the twin advantages of silicon-intensive integration and low-cost high-yield towards developing a single-chip solution that uses on-chip signal processing and phased arrays to generate precise and robust chirps for an electronically-steerable fine LIDAR beam
Roadmap on spatiotemporal light fields
Spatiotemporal sculpturing of light pulse with ultimately sophisticated
structures represents the holy grail of the human everlasting pursue of
ultrafast information transmission and processing as well as ultra-intense
energy concentration and extraction. It also holds the key to unlock new
extraordinary fundamental physical effects. Traditionally, spatiotemporal light
pulses are always treated as spatiotemporally separable wave packet as solution
of the Maxwell's equations. In the past decade, however, more generalized forms
of spatiotemporally nonseparable solution started to emerge with growing
importance for their striking physical effects. This roadmap intends to
highlight the recent advances in the creation and control of increasingly
complex spatiotemporally sculptured pulses, from spatiotemporally separable to
complex nonseparable states, with diverse geometric and topological structures,
presenting a bird's eye viewpoint on the zoology of spatiotemporal light fields
and the outlook of future trends and open challenges.Comment: This is the version of the article before peer review or editing, as
submitted by an author to Journal of Optics. IOP Publishing Ltd is not
responsible for any errors or omissions in this version of the manuscript or
any version derived from i
Beyond key velocity: Continuous sensing for expressive control on the Hammond Organ and Digital keyboards
In this thesis we seek to explore the potential for continuous key position to be
used as an expressive control in keyboard musical instruments, and how preexisting
skills can be adapted to leverage this additional control. Interaction between
performer and sound generation on a keyboard instrument is often restricted
to a number of discrete events on the keys themselves (notes onsets and
offsets), while complementary continuous control is provided via additional interfaces,
such as pedals, modulation wheels and knobs. The rich vocabulary of
gestures that skilled performers can achieve on the keyboard is therefore often
simplified to a single, discrete velocity measurement. A limited number of acoustical
and electromechanical keyboard instruments do, however, present affordances
of continuous key control, so that the role of the key is not limited to delivering
discrete events, but its instantaneous position is, to a certain extent, an element of
expressive control. Recent evolutions in sensing technologies allow to leverage continuous
key position as an expressive element in the sound generation of digital
keyboard musical instruments.
We start by exploring the expression available on the keys of the Hammond
organ, where nine contacts are closed at different points of the key throw for each
key onset and we find that the velocity and the percussiveness of the touch affect
the way the contacts close and bounce, producing audible differences in the onset
transient of each note.
We develop an embedded hardware and software environment for low-latency
sound generation controlled by continuous key position, which we use to create
two digital keyboard instruments. The first of these emulates the sound of a Hammond
and can be controlled with continuous key position, so that it allows for
arbitrary mapping between the key position and the nine virtual contacts of the
digital sound generator. A study with 10 musicians shows that, when exploring
the instrument on their own, the players can appreciate the differences between
different settings and tend to develop a personal preference for one of them. In the
second instrument, continuous key position is the fundamental means of expression:
percussiveness, key position and multi-key gestures control the parameters
of a physical model of a flute. In a study with 6 professional musicians playing
this instrument we gather insights on the adaptation process, the limitations of the
interface and the transferability of traditional keyboard playing techniques
Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)
Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression
Scanning Spaces: Paradigms for Spatial Sonification and Synthesis
In 1962 Karlheinz Stockhausen’s “Concept of Unity in Electronic Music” introduced a connection between the parameters of intensity, duration, pitch, and timbre using an accelerating pulse train. In 1973 John Chowning discovered that complex audio spectra could be synthesized by increasing vibrato rates past 20Hz. In both cases the notion of acceleration to produce timbre was critical to discovery. Although both composers also utilized sound spatialization in their works, spatial parameters were not unified with their synthesis techniques. This dissertation examines software studies and multimedia works involving the use of spatial and visual data to produce complex sound spectra. The culmination of these experiments, Spatial Modulation Synthesis, is introduced as a novel, mathematical control paradigm for audio-visual synthesis, providing unified control of spatialization, timbre, and visual form using high-speed sound trajectories.The unique, visual sonification and spatialization rendering paradigms of this disser- tation necessitated the development of an original audio-sample-rate graphics rendering implementation, which, unlike typical multimedia frameworks, provides an exchange of audio-visual data without downsampling or interpolation
- …