Applications of Graphene at Microwave Frequencies

In view to the epochal scenarios that nanotechnology discloses, nano-electronics has the potential to introduce a paradigm shift in electronic systems design similar to that of the transition from vacuum tubes to semiconductor devices. Since low dimensional (1D and 2D) nano-structured materials exhibit unprecedented electro-mechanical properties in a wide frequency range, including radio-frequencies (RF), microwave nano-electronics provides an enormous and yet widely undiscovered opportunity for the engineering community. Carbon nano-electronics is one of the main research routes of RF/microwave nano-electronics. In particular, graphene has shown proven results as an emblematic protagonist, and a real solution for a wide variety of microwave electronic devices and circuits. This paper introduces graphene properties in the microwave range, and presents a paradigm of novel graphene-based devices and applications in the microwave/RF frequency range

Modeling Of Two Dimensional Graphene And Non-graphene Material Based Tunnel Field Effect Transistors For Integrated Circuit Design

The Moore’s law of scaling of metal oxide semiconductor field effect transistor (MOSFET) had been a driving force toward the unprecedented advancement in development of integrated circuit over the last five decades. As the technology scales down to 7 nm node and below following the Moore’s law, conventional MOSFETs are becoming more vulnerable to extremely high off-state leakage current exhibiting a tremendous amount of standby power dissipation. Moreover, the fundamental physical limit of MOSFET of 60 mV/decade subthreshold slope exacerbates the situation further requiring current transport mechanism other than drift and diffusion for the operation of transistors. One way to limit such unrestrained amount of power dissipation is to explore novel materials with superior thermal and electrical properties compared to traditional bulk materials. On the other hand, energy efficient steep subthreshold slope devices are the other possible alternatives to conventional MOSFET based on emerging novel materials. This dissertation addresses the potential of both advanced materials and devices for development of next generation energy efficient integrated circuits. Among the different steep subthreshold slope devices, tunnel field effect transistor (TFET) has been considered as a promising candidate after MOSFET. A superior gate control on source-channel band-to-band tunneling providing subthreshold slopes well below than 60 mV/decade. With the emergence of atomically thin two-dimensional (2D) materials, interest in the design of TFET based on such novel 2D materials has also grown significantly. Graphene being the first and the most studied among 2D materials with exotic electronic and thermal properties. This dissertation primarily considers current transport modeling of graphene based tunnel devices from transport phenomena to energy efficient integrated circuit design. Three current transport models: semi-classical, semi-quantum and numerical simulations are described for the modeling of graphene nanoribbon tunnel field effect transistor (GNR TFET) where the semi-classical model is in close agreement with the quantum transport simulation. Moreover, the models produced are also extended for integrated circuit design using Verilog-A hardware description language for logic design. In order to overcome the challenges associated with the band gap engineering for making graphene transistor for logic operation, the promise of graphene based interlayer tunneling transistors are discussed along with their existing fundamental physical limitation of subthreshold slope. It has been found that such interlayer tunnel transistor has very poor electrostatic gate control on drain current. It gives subthreshold slope greater than the thermionic limit of 60 mV/decade at room temperature. In order to resolve such limitation of interlayer tunneling transistors, a new type of transistor named “junctionless tunnel effect transistor (JTET)” has been invented and modeled for the first time considering graphene-boron nitride (BN)-graphene and molybdenum disulfide (MoS2)-boron nitride (BN) heterostructures, where the interlayer tunneling mechanism controls the source-drain ballistic transport instead of depleting carriers in the channel. Steep subthreshold slope, low power and high frequency THz operation are few of the promising features studied for such graphene and MoS2 JTETs. From current transport modeling to energy efficient integrated circuit design using Verilog-A has been carried out for these new devices as well. Thus, findings in this dissertation would suggest the exciting opportunity of a new class of next generation energy efficient material based transistors as switches

Graphene-based current mode logic circuits: a simulation study for an emerging technology

In this paper, the usage of graphene transistors is introduced to be a suitable solution for extending low power designs. Static and current mode logic (CML) styles on both nanoscale graphene and silicon FINFET technologies are compared. Results show that power in CML styles approximately are independent of frequency and the graphene-based CML (G-CML) designs are more power-efficient as the frequency and complexity increase. Compared to silicon-based CML (Si-CML) standard cells, there is 94% reduction in power consumption for G-CML counterparts. Furthermore, a G-CML 4-bit adder respectively offers 8.9 and 1.7 times less power and delay than the Si-CML adder

Application of Graphene within Optoelectronic Devices and Transistors

Scientists are always yearning for new and exciting ways to unlock graphene's true potential. However, recent reports suggest this two-dimensional material may harbor some unique properties, making it a viable candidate for use in optoelectronic and semiconducting devices. Whereas on one hand, graphene is highly transparent due to its atomic thickness, the material does exhibit a strong interaction with photons. This has clear advantages over existing materials used in photonic devices such as Indium-based compounds. Moreover, the material can be used to 'trap' light and alter the incident wavelength, forming the basis of the plasmonic devices. We also highlight upon graphene's nonlinear optical response to an applied electric field, and the phenomenon of saturable absorption. Within the context of logical devices, graphene has no discernible band-gap. Therefore, generating one will be of utmost importance. Amongst many others, some existing methods to open this band-gap include chemical doping, deformation of the honeycomb structure, or the use of carbon nanotubes (CNTs). We shall also discuss various designs of transistors, including those which incorporate CNTs, and others which exploit the idea of quantum tunneling. A key advantage of the CNT transistor is that ballistic transport occurs throughout the CNT channel, with short channel effects being minimized. We shall also discuss recent developments of the graphene tunneling transistor, with emphasis being placed upon its operational mechanism. Finally, we provide perspective for incorporating graphene within high frequency devices, which do not require a pre-defined band-gap.Comment: Due to be published in "Current Topics in Applied Spectroscopy and the Science of Nanomaterials" - Springer (Fall 2014). (17 pages, 19 figures

Fault Modeling of Graphene Nanoribbon FET Logic Circuits

[EN] Due to the increasing defect rates in highly scaled complementary metal-oxide-semiconductor (CMOS) devices, and the emergence of alternative nanotechnology devices, reliability challenges are of growing importance. Understanding and controlling the fault mechanisms associated with new materials and structures for both transistors and interconnection is a key issue in novel nanodevices. The graphene nanoribbon field-effect transistor (GNR FET) has revealed itself as a promising technology to design emerging research logic circuits, because of its outstanding potential speed and power properties. This work presents a study of fault causes, mechanisms, and models at the device level, as well as their impact on logic circuits based on GNR FETs. From a literature review of fault causes and mechanisms, fault propagation was analyzed, and fault models were derived for device and logic circuit levels. This study may be helpful for the prevention of faults in the design process of graphene nanodevices. In addition, it can help in the design and evaluation of defect- and fault-tolerant nanoarchitectures based on graphene circuits. Results are compared with other emerging devices, such as carbon nanotube (CNT) FET and nanowire (NW) FET.This work was supported in part by the Spanish Government under the research project TIN2016-81075-R and by Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), under the project 200190032.Gil Tomás, DA.; Gracia-Morán, J.; Saiz-Adalid, L.; Gil, P. (2019). Fault Modeling of Graphene Nanoribbon FET Logic Circuits. Electronics. 8(8):1-18. https://doi.org/10.3390/electronics8080851S11888International Technology Roadmap for Semiconductors (ITRS) 2013http://www.itrs2.net/2013-itrs.htmlSchuegraf, K., Abraham, M. C., Brand, A., Naik, M., & Thakur, R. (2013). Semiconductor Logic Technology Innovation to Achieve Sub-10 nm Manufacturing. IEEE Journal of the Electron Devices Society, 1(3), 66-75. doi:10.1109/jeds.2013.2271582International Technology Roadmap for Semiconductors (ITRS) 2015https://bit.ly/2xiiT8PNovoselov, K. S. (2004). Electric Field Effect in Atomically Thin Carbon Films. Science, 306(5696), 666-669. doi:10.1126/science.1102896Geim, A. K., & Novoselov, K. S. (2007). The rise of graphene. Nature Materials, 6(3), 183-191. doi:10.1038/nmat1849Wu, Y., Farmer, D. B., Xia, F., & Avouris, P. (2013). Graphene Electronics: Materials, Devices, and Circuits. Proceedings of the IEEE, 101(7), 1620-1637. doi:10.1109/jproc.2013.2260311Choudhury, M. R., Youngki Yoon, Jing Guo, & Mohanram, K. (2011). Graphene Nanoribbon FETs: Technology Exploration for Performance and Reliability. IEEE Transactions on Nanotechnology, 10(4), 727-736. doi:10.1109/tnano.2010.2073718Avouris, P. (2010). Graphene: Electronic and Photonic Properties and Devices. Nano Letters, 10(11), 4285-4294. doi:10.1021/nl102824hBanadaki, Y. M., & Srivastava, A. (2015). Scaling Effects on Static Metrics and Switching Attributes of Graphene Nanoribbon FET for Emerging Technology. IEEE Transactions on Emerging Topics in Computing, 3(4), 458-469. doi:10.1109/tetc.2015.2445104Avouris, P., Chen, Z., & Perebeinos, V. (2007). Carbon-based electronics. Nature Nanotechnology, 2(10), 605-615. doi:10.1038/nnano.2007.300Banerjee, S. K., Register, L. F., Tutuc, E., Basu, D., Kim, S., Reddy, D., & MacDonald, A. H. (2010). Graphene for CMOS and Beyond CMOS Applications. Proceedings of the IEEE, 98(12), 2032-2046. doi:10.1109/jproc.2010.2064151Schwierz, F. (2013). Graphene Transistors: Status, Prospects, and Problems. Proceedings of the IEEE, 101(7), 1567-1584. doi:10.1109/jproc.2013.2257633Fregonese, S., Magallo, M., Maneux, C., Happy, H., & Zimmer, T. (2013). Scalable Electrical Compact Modeling for Graphene FET Transistors. IEEE Transactions on Nanotechnology, 12(4), 539-546. doi:10.1109/tnano.2013.2257832Chen, Y.-Y., Sangai, A., Rogachev, A., Gholipour, M., Iannaccone, G., Fiori, G., & Chen, D. (2015). A SPICE-Compatible Model of MOS-Type Graphene Nano-Ribbon Field-Effect Transistors Enabling Gate- and Circuit-Level Delay and Power Analysis Under Process Variation. IEEE Transactions on Nanotechnology, 14(6), 1068-1082. doi:10.1109/tnano.2015.2469647Ferrari, A. C., Bonaccorso, F., Fal’ko, V., Novoselov, K. S., Roche, S., Bøggild, P., … Pugno, N. (2015). Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems. Nanoscale, 7(11), 4598-4810. doi:10.1039/c4nr01600aHong, A. J., Song, E. B., Yu, H. S., Allen, M. J., Kim, J., Fowler, J. D., … Wang, K. L. (2011). Graphene Flash Memory. ACS Nano, 5(10), 7812-7817. doi:10.1021/nn201809kJeng, S.-L., Lu, J.-C., & Wang, K. (2007). A Review of Reliability Research on Nanotechnology. IEEE Transactions on Reliability, 56(3), 401-410. doi:10.1109/tr.2007.903188Srinivasu, B., & Sridharan, K. (2017). A Transistor-Level Probabilistic Approach for Reliability Analysis of Arithmetic Circuits With Applications to Emerging Technologies. IEEE Transactions on Reliability, 66(2), 440-457. doi:10.1109/tr.2016.2642168Teixeira Franco, D., Naviner, J.-F., & Naviner, L. (2006). Yield and reliability issues in nanoelectronic technologies. annals of telecommunications - annales des télécommunications, 61(11-12), 1422-1457. doi:10.1007/bf03219903Lin, Y.-M., Jenkins, K. A., Valdes-Garcia, A., Small, J. P., Farmer, D. B., & Avouris, P. (2009). Operation of Graphene Transistors at Gigahertz Frequencies. Nano Letters, 9(1), 422-426. doi:10.1021/nl803316hLiao, L., Lin, Y.-C., Bao, M., Cheng, R., Bai, J., Liu, Y., … Duan, X. (2010). High-speed graphene transistors with a self-aligned nanowire gate. Nature, 467(7313), 305-308. doi:10.1038/nature09405Wang, X., Tabakman, S. M., & Dai, H. (2008). Atomic Layer Deposition of Metal Oxides on Pristine and Functionalized Graphene. Journal of the American Chemical Society, 130(26), 8152-8153. doi:10.1021/ja8023059Geim, A. K. (2009). Graphene: Status and Prospects. Science, 324(5934), 1530-1534. doi:10.1126/science.1158877Mistewicz, K., Nowak, M., Wrzalik, R., Śleziona, J., Wieczorek, J., & Guiseppi-Elie, A. (2016). Ultrasonic processing of SbSI nanowires for their application to gas sensors. Ultrasonics, 69, 67-73. doi:10.1016/j.ultras.2016.04.004Jesionek, M., Nowak, M., Mistewicz, K., Kępińska, M., Stróż, D., Bednarczyk, I., & Paszkiewicz, R. (2018). Sonochemical growth of nanomaterials in carbon nanotube. Ultrasonics, 83, 179-187. doi:10.1016/j.ultras.2017.03.014Chen, X., Seo, D. H., Seo, S., Chung, H., & Wong, H.-S. P. (2012). Graphene Interconnect Lifetime: A Reliability Analysis. IEEE Electron Device Letters, 33(11), 1604-1606. doi:10.1109/led.2012.2211564Wang, Z. F., Zheng, H., Shi, Q. W., & Chen, J. (2009). Emerging nanodevice paradigm. ACM Journal on Emerging Technologies in Computing Systems, 5(1), 1-19. doi:10.1145/1482613.1482616Dong, J., Xiang, G., Xiang-Yang, K., & Jia-Ming, L. (2007). Atomistic Failure Mechanism of Single Wall Carbon Nanotubes with Small Diameters. Chinese Physics Letters, 24(1), 165-168. doi:10.1088/0256-307x/24/1/045Bu, H., Chen, Y., Zou, M., Yi, H., Bi, K., & Ni, Z. (2009). Atomistic simulations of mechanical properties of graphene nanoribbons. Physics Letters A, 373(37), 3359-3362. doi:10.1016/j.physleta.2009.07.04

Flexible high frequency electronics and plasmonics using two dimensional nanomaterials

In this work, we have demonstrated novel flexible electronics and plasmonic devices using 2-dimensional (2D) nanomaterials (graphene and MoS2). The first part of this work is about design of flexible high frequency electronics using 2D nanomaterials. We report sub-THz graphene transistors with fT ~ 100GHz. We also discuss how to integrate graphene based sub blocks (antenna, mixer and speaker) to fabricate all graphene based wireless receiver. We report for the first time flexible RF transistors with GHz frequency response using CVD grown monolayer MoS2. We also demonstrate flexible low power RF nanosystems (amplifiers, mixers, AM receiver) using CVD MoS2. We have developed MoS2 transistor models for integrated circuit design application. RF MoS2 transistors results are very promising for low power internet of things (IOT) applications. In second part, we have shown design of novel plasmonic devices using 2D nanomaterials. We have demonstrated large area tunable graphene metasurface using moiré nanosphere lithography (MNSL). We have shown novel method to fabricate large area graphene nanoribbons (GNRs) using block copolymer lithography (BCPL) and its potential application towards tunable mid-IR plasmonic sensing. We report for the first time nanopatterning of CVD MoS2 on plasmonic substrate using bubble pen lithography (BPL). We have also shown light enhancement of monolayer CVD MoS2 using plasmonic nanoantenna array (PNA). These results are very useful for design of highly efficient 2D nanomaterial based LEDs, photodetectors, lasers and sensors.Electrical and Computer Engineerin

Physical Modeling of Graphene Nanoribbon Field Effect Transistor Using Non-Equilibrium Green Function Approach for Integrated Circuit Design

The driving engine for the exponential growth of digital information processing systems is scaling down the transistor dimensions. For decades, this has enhanced the device performance and density. However, the International Technology Roadmap for Semiconductors (ITRS) states the end of Moore’s law in the next decade due to the scaling challenges of silicon-based CMOS electronics, e.g. extremely high power density. The forward-looking solutions are the utilization of emerging materials and devices for integrated circuits. The Ph.D. dissertation focuses on graphene, one atomic layer of carbon sheet, experimentally discovered in 2004. Since fabrication technology of emerging materials is still in early stages, transistor modeling has been playing an important role for evaluating futuristic graphene-based devices and circuits. The GNR FET has been simulated by solving a numerical quantum transport model based on self-consistent solution of the 3D Poisson equation and 1D Schrödinger equations within the non-equilibrium Green’s function (NEGF) formalism. The quantum transport model fully treats short channel-length electrostatic effects and the quantum tunneling effects, leading to the technology exploration of graphene nanoribbon field effect transistors (GNRFETs) for the future. A comprehensive study of static metrics and switching attributes of GNRFET has been presented including the performance dependence of device characteristics to the GNR width and the scaling of its channel length down to 2.5 nanometer. It has been found that increasing the GNR width deteriorate the off-state performance of the GNRFET, such that, narrower armchair GNRs improved the device robustness to short channel effects, leading to better off-state performance considering smaller off-current, larger ION/IOFF ratio, smaller subthreshold swing and smaller drain-induced barrier-lowering. The wider armchair GNRs allow the scaling of channel length and supply voltage resulting in better on-state performance such as higher drive current, smaller intrinsic gate-delay time and smaller power-delay product. In addition, the width-dependent characteristics of GNR FETs is investigated for two GNR semiconducting families (3p,0) and (3p+1,0). It has been found that the GNRs(3p+1,0) demonstrates superior off-state performance, while, on the other hand, GNRs(3p,0) shows superior on-state performance. Thus, GNRs(3p+1,0) are promising for low-power design, while GNRs(3p,0) indicate a more preferable attribute for high frequency applications