Broadband sparse sensing : a polynomial matrix approach to co-prime and super nested arrays

Passively monitoring the spectrum for detection and localisation of radar sources is ever more fraught with difficulty due to the advent of low probability of intercept (LPI) radar technology. A key aspect of LPI radar waveform design are the spread spectrum modulation schemes; instead of concentrating power over a narrow-bandwidth, this power can be spread across a broad-bandwidth making the source difficult to detect using conventional ESM methods. Such sources prompt the need for new detection, and direction of arrival estimation methods. Moreover, broadband antennas and their subsequent processing systems are expensive in terms of both cost and power-forcing a real world feasible limit on the number of antennas in a system. In addition, a fine spacing is required for ambiguity free direction of arrival estimation of higher frequency sources while a wide aperture is required for sufficient resolution of lower frequency sources. In this paper we present a novel sparse broadband direction of arrival method based upon co-prime and super-nested array geometries, using polynomial matrix methods whereby a new virtual array is formed containing many more virtual elements than in the physical array

Statistical Nested Sensor Array Signal Processing

Source number detection and direction-of-arrival (DOA) estimation are two major applications of sensor arrays. Both applications are often confined to the use of uniform linear arrays (ULAs), which is expensive and difficult to yield wide aperture. Besides, a ULA with N scalar sensors can resolve at most N − 1 sources. On the other hand, a systematic approach was recently proposed to achieve O(N 2 ) degrees of freedom (DOFs) using O(N) sensors based on a nested array, which is obtained by combining two or more ULAs with successively increased spacing. This dissertation will focus on a fundamental study of statistical signal processing of nested arrays. Five important topics are discussed, extending the existing nested-array strategies to more practical scenarios. Novel signal models and algorithms are proposed. First, based on the linear nested array, we consider the problem for wideband Gaussian sources. To employ the nested array to the wideband case, we propose effective strategies to apply nested-array processing to each frequency component, and combine all the spectral information of various frequencies to conduct the detection and estimation. We then consider the practical scenario with distributed sources, which considers the spreading phenomenon of sources. Next, we investigate the self-calibration problem for perturbed nested arrays, for which existing works require certain modeling assumptions, for example, an exactly known array geometry, including the sensor gain and phase. We propose corresponding robust algorithms to estimate both the model errors and the DOAs. The partial Toeplitz structure of the covariance matrix is employed to estimate the gain errors, and the sparse total least squares is used to deal with the phase error issue. We further propose a new class of nested vector-sensor arrays which is capable of significantly increasing the DOFs. This is not a simple extension of the nested scalar-sensor array. Both the signal model and the signal processing strategies are developed in the multidimensional sense. Based on the analytical results, we consider two main applications: electromagnetic (EM) vector sensors and acoustic vector sensors. Last but not least, in order to make full use of the available limited valuable data, we propose a novel strategy, which is inspired by the jackknifing resampling method. Exploiting numerous iterations of subsets of the whole data set, this strategy greatly improves the results of the existing source number detection and DOA estimation methods

Robust Direction-of-Arrival Estimation using Array Feedback Beamforming in Low SNR Scenarios

A new spatial IIR beamformer based direction-of-arrival (DoA) estimation method is proposed in this paper. We propose a retransmission based spatial feedback method for an array of transmit and receive antennas that improves the performance parameters of a beamformer, viz. half-power beamwidth (HPBW), side-lobe suppression, and directivity. Through quantitative comparison, we show that our approach outperforms the previous feedback beamforming approach with a single transmit antenna, and the conventional beamformer. We then incorporate a retransmission based minimum variance distortionless response (MVDR) beamformer with the feedback beamforming setup. We propose two approaches, show that one approach is superior in terms of lower estimation error, and use that as the DoA estimation method. We then compare this approach with Multiple Signal Classification (MUSIC), Estimation of Parameters using Rotation Invariant Technique (ESPRIT), robust MVDR, nested-array MVDR, and reduced-dimension MVDR methods. The results show that at SNR levels of -60 dB to -10 dB, the angle estiation error of the proposed method is 20 degree less compared to that of prior methods

Underdetermined DOA Estimation Under the Compressive Sensing Framework: A Review

Direction of arrival (DOA) estimation from the perspective of sparse signal representation has attracted tremendous attention in past years, where the underlying spatial sparsity reconstruction problem is linked to the compressive sensing (CS) framework. Although this is an area with ongoing intensive research and new methods and results are reported regularly, it is time to have a review about the basic approaches and methods for CS-based DOA estimation, in particular for the underdetermined case. We start from the basic time-domain CSbased formulation for narrowband arrays and then move to the case for recently developed methods for sparse arrays based on the co-array concept. After introducing two specifically designed structures (the two-level nested array and the co-prime array) for optimizing the virtual sensors corresponding to the difference coarray, this CS-based DOA estimation approach is extended to the wideband case by employing the group sparsity concept, where a much larger physical aperture can be achieved by allowing a larger unit inter-element spacing and therefore leading to further improved performance. Finally, a specifically designed ULA structure with associated CS-based underdetermined DOA estimation is presented to exploit the difference co-array concept in the spatio-spectral domain, leading to a significant increase in DOFs. Representative simulation results for typical narrowband and wideband scenarios are provided to demonstrate their performance

Array Signal Processing Based on Traditional and Sparse Arrays

Array signal processing is based on using an array of sensors to receive the impinging signals. The received data is either spatially filtered to focus the signals from a desired direction or it may be used for estimating a parameter of source signal like direction of arrival (DOA), polarization and source power. Spatial filtering also known as beamforming and DOA estimation are integral parts of array signal processing and this thesis is aimed at solving some key probems related to these two areas. Wideband beamforming holds numerous applications in the bandwidth hungry data traffic of present day world. Several techniques exist to design fixed wideband beamformers based on traditional arrays like uniform linear array (ULA). Among these techniques, least squares based eigenfilter method is a key technique which has been used extensively in filter and wideband beamformer design. The first contribution of this thesis comes in the form of critically analyzing the standard eigenfilter method where a serious flaw in the design formulation is highlighted which generates inconsistent design performance, and an additional constraint is added to stabilize the achieved design. Simulation results show the validity and significance of the proposed method. Traditional arrays based on ULAs have limited applications in array signal processing due to the large number of sensors required and this problem has been addressed by the application of sparse arrays. Sparse arrays have been exploited from the perspective of their difference co-array structures which provide significantly higher number of degrees of freedoms (DOFs) compared to ULAs for the same number of sensors. These DOFs (consecutive and unique lags) are utilized in the application of DOA estimation with the help of difference co-array based DOA estimators. Several types of sparse arrays include minimum redundancy array (MRA), minimum hole array (MHA), nested array, prototype coprime array, conventional coprime array, coprime array with compressed interelement spacing (CACIS), coprime array with displaced subarrays (CADiS) and super nested array. As a second contribution of this thesis, a new sparse array termed thinned coprime array (TCA) is proposed which holds all the properties of a conventional coprime array but with \ceil*{\frac{M}{2}} fewer sensors where $M$ is the number of sensors of a subarray in the conventional structure. TCA possesses improved level of sparsity and is robust against mutual coupling compared to other sparse arrays. In addition, TCA holds higher number of DOFs utilizable for DOA estimation using variety of methods. TCA also shows lower estimation error compared to super nested arrays and MRA with increasing array size. Although TCA holds numerous desirable features, the number of unique lags offered by TCA are close to the sparsest CADiS and nested array and significantly lower than MRA which limits the estimation error performance offered by TCA through (compressive sensing) CS-based methods. In this direction, the structure of TCA is studied to explore the possibility of an array which can provide significantly higher number of unique lags with improved sparsity for a given number of sensors. The result of this investigation is the third contribution of this thesis in the form of a new sparse array, displaced thinned coprime array with additional sensor (DiTCAAS), which is based on a displaced version of TCA. The displacement of the subarrays generates an increase in the unique lags but the minimum spacing between the sensors becomes an integer multiple of half wavelength. To avoid spatial aliasing, an additional sensor is added at half wavelength from one of the sensors of the displaced subarray. The proposed placement of the additional sensor generates significantly higher number of unique lags for DiTCAAS, even more than the DOFs provided by MRA. Due to its improved sparsity and higher number of unique lags, DiTCAAS generates the lowest estimation error and robustness against heavy mutual coupling compared to super nested arrays, MRA, TCA and sparse CADiS with CS-based DOA estimation