24,202 research outputs found
Power quality and electromagnetic compatibility: special report, session 2
The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems.
Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages).
The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks:
Block 1: Electric and Magnetic Fields, EMC, Earthing systems
Block 2: Harmonics
Block 3: Voltage Variation
Block 4: Power Quality Monitoring
Two Round Tables will be organised:
- Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13)
- Reliability Benchmarking - why we should do it? What should be done in future? (RT 15
Study of the damping characteristics of general aviation aircraft panels and development of computer programs to calculate the effectiveness of interior noise control treatment, part 1
Tests were carried out on 20 inch x 20 inch panels at different test conditions using free-free panels, clamped panels, and panels as installed in the KU-FRL acoustic test facility. Tests with free-free panels verified the basic equipment set-up and test procedure. They also provided a basis for comparison. The results indicate that the effect of installed panels is to increase the damping ratio at the same frequency. However, a direct comparison is not possible, as the fundamental frequency of a free-free panel differs from the resonance frequency of the panel when installed. The damping values of panels installed in the test facility are closer to the damping values obtained with fixed-fixed panels. Effects of damping tape, stiffeners, and bonded and riveted edged conditions were also investigated. Progress in the development of a simple interior noise level control program is reported
Characterization of thermal effects in the Enhanced LIGO Input Optics
We present the design and performance of the LIGO Input Optics subsystem as
implemented for the sixth science run of the LIGO interferometers. The Initial
LIGO Input Optics experienced thermal side effects when operating with 7 W
input power. We designed, built, and implemented improved versions of the Input
Optics for Enhanced LIGO, an incremental upgrade to the Initial LIGO
interferometers, designed to run with 30 W input power. At four times the power
of Initial LIGO, the Enhanced LIGO Input Optics demonstrated improved
performance including better optical isolation, less thermal drift, minimal
thermal lensing and higher optical efficiency. The success of the Input Optics
design fosters confidence for its ability to perform well in Advanced LIGO
Recommended from our members
Application of Advanced Early Warning Systems with Adaptive Protection
This project developed and field-tested two methods of Adaptive Protection systems utilizing synchrophasor data. One method detects conditions of system stress that can lead to unintended relay operation, and initiates a supervisory signal to modify relay response in real time to avoid false trips. The second method detects the possibility of false trips of impedance relays as stable system swings “encroach” on the relays’ impedance zones, and produces an early warning so that relay engineers can re-evaluate relay settings. In addition, real-time synchrophasor data produced by this project was used to develop advanced visualization techniques for display of synchrophasor data to utility operators and engineers
Acoustic energy transmission in cast iron pipelines
In this paper we propose acoustic power transfer as a method for the remote powering of pipeline sensor nodes. A theoretical framework of acoustic power propagation in the ceramic transducers and the metal structures is drawn, based on the Mason equivalent circuit. The effect of mounting on the electrical response of piezoelectric transducers is studied experimentally. Using two identical transducer structures, power transmission of 0.33 mW through a 1 m long, 118 mm diameter cast iron pipe, with 8 mm wall thickness is demonstrated, at 1 V received voltage amplitude. A near-linear relationship between input and output voltage is observed. These results show that it is possible to deliver significant power to sensor nodes through acoustic waves in solid structures. The proposed method may enable the implementation of acoustic - powered wireless sensor nodes for structural and operation monitoring of pipeline infrastructure
Monitoring and Fault Location Sensor Network for Underground Distribution Lines
One of the fundamental tasks of electric distribution utilities is guaranteeing a continuous
supply of electricity to their customers. The primary distribution network is a critical part of these
facilities because a fault in it could affect thousands of customers. However, the complexity of
this network has been increased with the irruption of distributed generation, typical in a Smart
Grid and which has significantly complicated some of the analyses, making it impossible to apply
traditional techniques. This problem is intensified in underground lines where access is limited. As a
possible solution, this paper proposes to make a deployment of a distributed sensor network along
the power lines. This network proposes taking advantage of its distributed character to support new
approaches of these analyses. In this sense, this paper describes the aquiculture of the proposed
network (adapted to the power grid) based on nodes that use power line communication and energy
harvesting techniques. In this sense, it also describes the implementation of a real prototype that
has been used in some experiments to validate this technological adaptation. Additionally, beyond
a simple use for monitoring, this paper also proposes the use of this approach to solve two typical
distribution system operator problems, such as: fault location and failure forecasting in power cables.Ministerio de Economía y Competitividad, Government of Spain project Sistema Inteligente Inalámbrico para Análisis y Monitorización de Líneas de Tensión Subterráneas en Smart Grids (SIIAM) TEC2013-40767-RMinisterio de Educación, Cultura y Deporte, Government of Spain, for the funding of the scholarship Formación de Profesorado Universitario 2016 (FPU 2016
- …