Adaptive applications of OPTO-VLSI processors in WDM networks

Communication is an inseparable part of human life and its nature continues to evolve and improve. The advent of laser was a herald to the new possibilities in the communication world. In recent years technologies such as Wavelength Division Multiplexing (WDM) and Erbium Doped Fiber Amplifiers (EDFA) have afforded significant boost to the practice of optical communication. At the heart of this brave new world is the need to dynamically/ adaptively steer/route beams of light carrying very large amounts of data. In recent years many techniques have been proposed for this purpose by various researchers. In this study we have elected to utilise the beam-steering capabilities of Opto-VLSI processors to investigate band-pass filtering and channel equalisation as two possible and practical applications in WDM networks

Optical memory disks in optical information processing

We describe the use of optical memory disks as elements in optical information processing architectures. The optical disk is an optical memory devicew ith a storage capacity approaching 1010b its which is naturally suited to parallel access. We discuss optical disk characteristics which are important in optical computing systems such as contrast, diffraction efficiency, and phase uniformity. We describe techniques for holographic storage on optical disks and present reconstructions of several types of computer-generated holograms. Various optical information processing architectures are described for applications such as database retrieval, neural network implementation, and image correlation. Selected systems are experimentally demonstrated

Opto-VLSI based WDM multifunction device

The tremendous expansion of telecommunication services in the past decade, in part due to the growth of the Internet, has made the development of high-bandwidth optical net-works a focus of research interest. The implementation of Dense-Wavelength Division Multiplexing (DWDM) optical fiber transmission systems has the potential to meet this demand. However, crucial components of DWDM networks – add/drop multiplexers, filters, gain equalizers as well as interconnects between optical channels – are currently not implemented as dynamically reconfigurable devices. Electronic cross-connects, the traditional solution to the reconfigurable optical networks, are increasingly not feasible due to the rapidly increasing bandwidth of the optical channels. Thus, optically transparent, dynamically reconfigurable DWDM components are important for alleviating the bottleneck in telecommunication systems of the future. In this study, we develop a promising class of Opto-VLSI based devices, including a dynamic multi-function WDM processor, combining the functions of optical filter, channel equalizer and add-drop multiplexer, as well as a reconfigurable optical power splitter. We review the technological options for all optical WDM components and compare their advantages and disadvantages. We develop a model for designing Opto-VLSI based WDM devices, and demonstrate experimentally the Opto-VLSI multi-function WDM device. Finally, we discuss the feasibility of Opto-VLSI WDM components in meeting the stringent requirements of the optical communications industry

Optoelectronic parallel-matching architecture : architecture description, performance estimation, and prototype demonstration

This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://dx.doi.org/10.1364/AO.40.000283 Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law

Efficient parallel processing with optical interconnections

With the advances in VLSI technology, it is now possible to build chips which can each contain thousands of processors. The efficiency of such chips in executing parallel algorithms heavily depends on the interconnection topology of the processors. It is not possible to build a fully interconnected network of processors with constant fan-in/fan-out using electrical interconnections. Free space optics is a remedy to this limitation. Qualities exclusive to the optical medium are its ability to be directed for propagation in free space and the property that optical channels can cross in space without any interference. In this thesis, we present an electro-optical interconnected architecture named Optical Reconfigurable Mesh (ORM). It is based on an existing optical model of computation. There are two layers in the architecture. The processing layer is a reconfigurable mesh and the deflecting layer contains optical devices to deflect light beams. ORM provides three types of communication mechanisms. The first is for arbitrary planar connections among sets of locally connected processors using the reconfigurable mesh. The second is for arbitrary connections among N of the processors using the electrical buses on the processing layer and N2 fixed passive deflecting units on the deflection layer. The third is for arbitrary connections among any of the N2 processors using the N2 mechanically reconfigurable deflectors in the deflection layer. The third type of communication mechanisms is significantly slower than the other two. Therefore, it is desirable to avoid reconfiguring this type of communication during the execution of the algorithms. Instead, the optical reconfiguration can be done before the execution of each algorithm begins. Determining a right configuration that would be suitable for the entire configuration of a task execution is studied in this thesis. The basic data movements for each of the mechanisms are studied. Finally, to show the power of ORM, we use all three types of communication mechanisms in the first O(logN) time algorithm for finding the convex hulls of all figures in an N x N binary image presented in this thesis

Zooplankton visualization system: design and real-time lossless image compression

In this thesis, I present a design of a small, self-contained, underwater plankton imaging system. I base the imaging system’s design on an embedded PC architecture based on PC/104-Plus standards to meet the compact size and low power requirements. I developed a simple graphical user interface to run on a real-time operating system to control the imaging system. I also address how a real-time image compression scheme implemented on an FPGA chip speeds up image transfer speeds of the imaging system. Since lossless compression of the image is required in order to retain all image details, I began with an established compression scheme like SPIHT, and latter proposed a new compression scheme that suits the imaging system’s requirements. I provide an estimate of the total amount of resources required and propose suitable FPGA chips to implement the compression scheme. Finally, I present various parallel designs by which the FPGA chip can be integrated into the imaging system

Smart cmos image sensor for 3d measurement

3D measurements are concerned with extracting visual information from the geometry of visible surfaces and interpreting the 3D coordinate data thus obtained, to detect or track the position or reconstruct the profile of an object, often in real time. These systems necessitate image sensors with high accuracy of position estimation and high frame rate of data processing for handling large volumes of data. A standard imager cannot address the requirements of fast image acquisition and processing, which are the two figures of merit for 3D measurements. Hence, dedicated VLSI imager architectures are indispensable for designing these high performance sensors. CMOS imaging technology provides potential to integrate image processing algorithms on the focal plane of the device, resulting in smart image sensors, capable of achieving better processing features in handling massive image data. The objective of this thesis is to present a new architecture of smart CMOS image sensor for real time 3D measurement using the sheet-beam projection methods based on active triangulation. Proposing the vision sensor as an ensemble of linear sensor arrays, all working in parallel and processing the entire image in slices, the complexity of the image-processing task shifts from O (N 2 ) to O (N). Inherent also in the design is the high level of parallelism to achieve massive parallel processing at high frame rate, required in 3D computation problems. This work demonstrates a prototype of the smart linear sensor incorporating full testability features to test and debug both at device and system levels. The salient features of this work are the asynchronous position to pulse stream conversion, multiple images binarization, high parallelism and modular architecture resulting in frame rate and sub-pixel resolution suitable for real time 3D measurements

Design and characterisation of a ferroelectric liquid crystal over silicon spatial light modulator

Many optical processing systems rely critically on the availability of high performance, electrically-addressed spatial light modulators. Ferroelectric liquid crystal over silicon is an attractive spatial light modulator technology because it combines two well matched technologies. Ferroelectric liquid crystal modulating materials exhibit fast switching times with low operating voltages, while very large scale silicon integrated circuits offer high-frequency, low power operation, and versatile functionality. This thesis describes the design and characterisation of the SBS256 - a general purpose 256 x 256 pixel ferroelectric liquid crystal over silicon spatial light modulator that incorporates a static-RAM latch and an exclusive-OR gate at each pixel. The static-RAM latch provides robust data storage under high read-beam intensities, while the exclusive-OR gate permits the liquid crystal layer to be fully and efficiently charge balanced. The SBS256 spatial light modulator operates in a binary mode. However, many applications, including helmet-mounted displays and optoelectronic implementations of artificial neural networks, require devices with some level of grey-scale capability. The 2 kHz frame rate of the device, permits temporal multiplexing to be used as a means of generating discrete grey-scale in real-time. A second integrated circuit design is also presented. This prototype neuraldetector backplane consists of a 4 x 4 array of optical-in, electronic-out processing units. These can sample the temporally multiplexed grey-scale generated by the SBS256. The neurons implement the post-synaptic summing and thresholding function, and can respond to both positive and negative activations - a requirement of many artificial neural network models