Contact aware robust semi-autonomous teleoperation of mobile manipulators

In the context of human-robot collaboration, cooperation and teaming, the use of mobile manipulators is widespread on applications involving unpredictable or hazardous environments for humans operators, like space operations, waste management and search and rescue on disaster scenarios. Applications where the manipulator's motion is controlled remotely by specialized operators. Teleoperation of manipulators is not a straightforward task, and in many practical cases represent a common source of failures. Common issues during the remote control of manipulators are: increasing control complexity with respect the mechanical degrees of freedom; inadequate or incomplete feedback to the user (i.e. limited visualization or knowledge of the environment); predefined motion directives may be incompatible with constraints or obstacles imposed by the environment. In the latter case, part of the manipulator may get trapped or blocked by some obstacle in the environment, failure that cannot be easily detected, isolated nor counteracted remotely. While control complexity can be reduced by the introduction of motion directives or by abstraction of the robot motion, the real-time constraint of the teleoperation task requires the transfer of the least possible amount of data over the system's network, thus limiting the number of physical sensors that can be used to model the environment. Therefore, it is of fundamental to define alternative perceptive strategies to accurately characterize different interaction with the environment without relying on specific sensory technologies. In this work, we present a novel approach for safe teleoperation, that takes advantage of model based proprioceptive measurement of the robot dynamics to robustly identify unexpected collisions or contact events with the environment. Each identified collision is translated on-the-fly into a set of local motion constraints, allowing the exploitation of the system redundancies for the computation of intelligent control laws for automatic reaction, without requiring human intervention and minimizing the disturbance of the task execution (or, equivalently, the operator efforts). More precisely, the described system consist in two different building blocks. The first, for detecting unexpected interactions with the environment (perceptive block). The second, for intelligent and autonomous reaction after the stimulus (control block). The perceptive block is responsible of the contact event identification. In short, the approach is based on the claim that a sensorless collision detection method for robot manipulators can be extended to the field of mobile manipulators, by embedding it within a statistical learning framework. The control deals with the intelligent and autonomous reaction after the contact or impact with the environment occurs, and consist on an motion abstraction controller with a prioritized set of constrains, where the highest priority correspond to the robot reconfiguration after a collision is detected; when all related dynamical effects have been compensated, the controller switch again to the basic control mode

Supervision of an Humanoid Robot

In this master thesis, the problem of supervision of an humanoid robot will be addressed. First, a model of the robot will be developed. Then, a fault detection and isolation scheme will be implemented using the linear parameter varying (LPV) approach. Finally, a fault tolerant scheme will be implemented to compensate the faulty effect, once the fault has been detected and isolated. The proposed approach will be tested in simulation and on a real humanoid platform.Incomin

Preliminary Report on High-Performance Computational Structures for Robot Control

In this report we present some initial results of our work completed thus far on Computational Structures for Robot Control . A SIMD architecture with the crossbar interprocessor network which achieves the parallel processing execution time lower bound of o( [a1n ]), where a1 is a constant and n is the number of manipulator joints, for the computation of the inverse dynamics problem, is discussed. A novel SIMD task scheduling algorithm that optimizes the parallel processing performance on the indicated architecture is also delineated. Simulations performed on this architecture show speedup factor of 3.4 over previous related work completed for the evaluation of the specified problem, is achieved. Parallel processing of PUMA forward and inverse kinematics solutions is next investigated using a particular scheduling algorithm. In addition, a custom bit-serial array architecture is designed for the computation of the inverse dynamics problem within the bit-serial execution time lower bound of o(c1k + c2kn), where c1 and c2 are specified constants, k is the word length, and n is the number of manipulator joints. Finally, mapping of the Newton-Euler equations onto a fixed systolic array is investigated. A balanced architecture for the inverse dynamics problem which achieves the systolic execution time lower bound for the specified problem is depicted. Please note again that these results are only preliminary and improvements to our algorithms and architectures are currently still being made

Study of robotics systems applications to the space station program

Applications of robotics systems to potential uses of the Space Station as an assembly facility, and secondarily as a servicing facility, are considered. A typical robotics system mission is described along with the pertinent application guidelines and Space Station environmental assumptions utilized in developing the robotic task scenarios. A functional description of a supervised dual-robot space structure construction system is given, and four key areas of robotic technology are defined, described, and assessed. Alternate technologies for implementing the more routine space technology support subsystems that will be required to support the Space Station robotic systems in assembly and servicing tasks are briefly discussed. The environmental conditions impacting on the robotic configuration design and operation are reviewed

Numerical Methods to Compute the Coriolis Matrix and Christoffel Symbols for Rigid-Body Systems

The growth of model-based control strategies for robotics platforms has led to the need for additional rigid-body-dynamics algorithms to support their operation. Toward addressing this need, this article summarizes efficient numerical methods to compute the Coriolis matrix and underlying Christoffel Symbols (of the first kind) for tree-structure rigid-body systems. The resulting algorithms can be executed purely numerically, without requiring any partial derivatives that would be required in symbolic techniques that do not scale. Properties of the presented algorithms share recursive structure in common with classical methods such as the Composite-Rigid-Body Algorithm. The algorithms presented are of the lowest possible order: $O(Nd)$ for the Coriolis Matrix and $O(Nd^2)$ for the Christoffel symbols, where $N$ is the number of bodies and $d$ is the depth of the kinematic tree. A method of order $O(Nd)$ is also provided to compute the time derivative of the mass matrix. A numerical implementation of these algorithms in C/C++ is benchmarked showing computation times on the order of 10-20 $\mu$s for the computation of the Coriolis matrix and $40-120$ $\mu$s for the computation of the Christoffel symbols for systems with $20$ degrees of freedom. These results demonstrate feasibility for the adoption of these numerical methods within control loops that need to operate at $1$kHz rates or higher, as is commonly required for model-based control applications

Multibody dynamics in robotics with focus on contact events

Multibody dynamics methodologies have been fundamental tools utilized to model and simulate robotic systems that experience contact conditions with the surrounding environment, such as in the case of feet and ground interactions. In addressing such problems, it is of paramount importance to accurately and efficiently handle the large body displacement associated with locomotion of robots, as well as the dynamic response related to contact-impact events. Thus, a generic computational approach, based on the Newton-Euler formulation, to represent the gross motion of robotic systems, is revisited in this work. The main kinematic and dynamic features, necessary to obtain the equations of motion, are discussed. A numerical procedure suitable to solve the equations of motion is also presented. The problem of modeling contacts in dynamical systems involves two main tasks, namely the contact detection and the contact resolution, which take into account for the kinematics and dynamics of the contacting bodies, constituting the general framework for the process of modeling and simulating complex contact scenarios. In order to properly model the contact interactions, the contact kinematic properties are established based on the geometry of contacting bodies, which allow to perform the contact detection task. The contact dynamics is represented by continuous contact force models, both in terms of normal and tangential contact directions. Finally, the presented formulations are demonstrated by the application to several robotics systems that involve contact and impact events with surrounding environment. Special emphasis is put on the systems’ dynamic behavior, in terms of performance and stability

Modeling and Control of Flexible Link Manipulators

Autonomous maritime navigation and offshore operations have gained wide attention with the aim of reducing operational costs and increasing reliability and safety. Offshore operations, such as wind farm inspection, sea farm cleaning, and ship mooring, could be carried out autonomously or semi-autonomously by mounting one or more long-reach robots on the ship/vessel. In addition to offshore applications, long-reach manipulators can be used in many other engineering applications such as construction automation, aerospace industry, and space research. Some applications require the design of long and slender mechanical structures, which possess some degrees of flexibility and deflections because of the material used and the length of the links. The link elasticity causes deflection leading to problems in precise position control of the end-effector. So, it is necessary to compensate for the deflection of the long-reach arm to fully utilize the long-reach lightweight flexible manipulators. This thesis aims at presenting a unified understanding of modeling, control, and application of long-reach flexible manipulators. State-of-the-art dynamic modeling techniques and control schemes of the flexible link manipulators (FLMs) are discussed along with their merits, limitations, and challenges. The kinematics and dynamics of a planar multi-link flexible manipulator are presented. The effects of robot configuration and payload on the mode shapes and eigenfrequencies of the flexible links are discussed. A method to estimate and compensate for the static deflection of the multi-link flexible manipulators under gravity is proposed and experimentally validated. The redundant degree of freedom of the planar multi-link flexible manipulator is exploited to minimize vibrations. The application of a long-reach arm in autonomous mooring operation based on sensor fusion using camera and light detection and ranging (LiDAR) data is proposed.publishedVersio