Parametric Macromodels of Differential Drivers and Receivers

This paper addresses the modeling of differential drivers and receivers for the analog simulation of high-speed interconnection systems. The proposed models are based on mathematical expressions, whose parameters can be estimated from the transient responses of the modeled devices. The advantages of this macromodeling approach are: improved accuracy with respect to models based on simplified equivalent circuits of devices; improved numerical efficiency with respect to detailed transistor-level models of devices; hiding of the internal structure of devices; straightforward circuit interpretation; or implementations in analog mixed-signal simulators. The proposed methodology is demonstrated on example devices and is applied to the prediction of transient waveforms and eye diagrams of a typical low-voltage differential signaling (LVDS) data link

Energy Aware Design and Analysis for Synchronous and Asynchronous Circuits

Power dissipation has become a major concern for IC designers. Various low power design techniques have been developed for synchronous circuits. Asynchronous circuits, however. have gained more interests recently due to their benefits in lower noise, easy timing control, etc. But few publications on energy reduction techniques for asynchronous logic are available. Power awareness indicates the ability of the system power to scale with changing conditions and quality requirements. Scalability is an important figure-of-merit since it allows the end user to implement operational policy. just like the user of mobile multimedia equipment needs to select between better quality and longer battery operation time. This dissertation discusses power/energy optimization and performs analysis on both synchronous and asynchronous logic. The major contributions of this dissertation include: 1 ) A 2-Dimensional Pipeline Gating technique for synchronous pipelined circuits to improve their power awareness has been proposed. This technique gates the corresponding clock lines connected to registers in both vertical direction (the data flow direction) and horizontal direction (registers within each pipeline stage) based on current input precision. 2) Two energy reduction techniques, Signal Bypassing & Insertion and Zero Insertion. have been developed for NCL circuits. Both techniques use Nulls to replace redundant Data 0\u27s based on current input precision in order to reduce the switching activity while Signal Bypassing & Insertion is for non-pipelined NCI, circuits and Zero Insertion is for pipelined counterparts. A dynamic active-bit detection scheme is also developed as an expansion. 3) Two energy estimation techniques, Equivalent Inverter Modeling based on Input Mapping in transistor-level and Switching Activity Modeling in gate-level, have been proposed. The former one is for CMOS gates with feedbacks and the latter one is for NCL circuits

Data Conversion Within Energy Constrained Environments

Within scientific research, engineering, and consumer electronics, there is a multitude of new discrete sensor-interfaced devices. Maintaining high accuracy in signal quantization while staying within the strict power-budget of these devices is a very challenging problem. Traditional paths to solving this problem include researching more energy-efficient digital topologies as well as digital scaling.;This work offers an alternative path to lower-energy expenditure in the quantization stage --- content-dependent sampling of a signal. Instead of sampling at a constant rate, this work explores techniques which allow sampling based upon features of the signal itself through the use of application-dependent analog processing. This work presents an asynchronous sampling paradigm, based off the use of floating-gate-enabled analog circuitry. The basis of this work is developed through the mathematical models necessary for asynchronous sampling, as well the SPICE-compatible models necessary for simulating floating-gate enabled analog circuitry. These base techniques and circuitry are then extended to systems and applications utilizing novel analog-to-digital converter topologies capable of leveraging the non-constant sampling rates for significant sample and power savings

34th Midwest Symposium on Circuits and Systems-Final Program

Organized by the Naval Postgraduate School Monterey California. Cosponsored by the IEEE Circuits and Systems Society. Symposium Organizing Committee: General Chairman-Sherif Michael, Technical Program-Roberto Cristi, Publications-Michael Soderstrand, Special Sessions- Charles W. Therrien, Publicity: Jeffrey Burl, Finance: Ralph Hippenstiel, and Local Arrangements: Barbara Cristi

Nonlinear Black-Box Models of Digital Integrated Circuits via System Identification

This Thesis concerns the development of numerical macromodels of digi- tal Integrated Circuits input/output buffers. Such models are of paramount importance for the system-level simulation required for the assessment of Sig- nal Integrity and Electromagnetic Compatibility effects in high-performance electronic equipments via system-level simulations. In order to obtain accurate and efficient macromodels, we concentrate on the black-box modeling approach, exploiting system identification methods. The present study contributes to the systematic discussion of the IC mod- eling process, in order to obtain macromodels that can overcome strengths and limitations of the methodologies presented so far. The performances of different parametric representations, as Sigmoidal Basis Functions (SBF) ex- pansions, Echo State Networks (ESN) and Local Linear State-Space (LLSS) models are investigated. All representations have proven capabilities for the modeling of unknown nonlinear dynamic systems and are good candidates too be used for the modeling problem at hand. For each model representation, the most suitable estimation algorithm is considered and a systematic analy- sis is performed to highlight advantages and limitations. For this analysis, the modeling process is applied to a synthetic nonlinear device representative of IC ports, and designed to generate stiff responses. The tests carried out show that LLSS models provide the best overall performance for the modeling of digital devices, even with strong nonlinear dynamics. LLSS models can be estimated by means of an efficient algorithm providing a unique solution. Local stability of models is preconditioned and verified a posteriori. The effectiveness of the modeling process based on LLSS representations is verified by applying the proposed technique to the modeling of real devices involved in a realistic data communication link (an RF-to-Digital interface used in mobile phones). The obtained macromodels have been successfully used to predict both the functional signals and the power supply and ground fluctuations. Besides, they turn out to be very efficient, providing a signifi- cant simulation speed-up for the complete data link

Otimização e melhoria da modulação comportamental para os interfaces de E/S analógica e de sinal misto de alta velocidade

Doutoramento em Engenharia ElectrotécnicaA integridade do sinal em sistemas digitais interligados de alta velocidade, e avaliada através da simulação de modelos físicos (de nível de transístor) é custosa de ponto vista computacional (por exemplo, em tempo de execução de CPU e armazenamento de memória), e exige a disponibilização de detalhes físicos da estrutura interna do dispositivo. Esse cenário aumenta o interesse pela alternativa de modelação comportamental que descreve as características de operação do equipamento a partir da observação dos sinais eléctrico de entrada/saída (E/S). Os interfaces de E/S em chips de memória, que mais contribuem em carga computacional, desempenham funções complexas e incluem, por isso, um elevado número de pinos. Particularmente, os buffers de saída são obrigados a distorcer os sinais devido à sua dinâmica e não linearidade. Portanto, constituem o ponto crítico nos de circuitos integrados (CI) para a garantia da transmissão confiável em comunicações digitais de alta velocidade. Neste trabalho de doutoramento, os efeitos dinâmicos não-lineares anteriormente negligenciados do buffer de saída são estudados e modulados de forma eficiente para reduzir a complexidade da modelação do tipo caixa-negra paramétrica, melhorando assim o modelo standard IBIS. Isto é conseguido seguindo a abordagem semi-física que combina as características de formulação do modelo caixa-negra, a análise dos sinais eléctricos observados na E/S e propriedades na estrutura física do buffer em condições de operação práticas. Esta abordagem leva a um processo de construção do modelo comportamental fisicamente inspirado que supera os problemas das abordagens anteriores, optimizando os recursos utilizados em diferentes etapas de geração do modelo (ou seja, caracterização, formulação, extracção e implementação) para simular o comportamento dinâmico não-linear do buffer. Em consequência, contributo mais significativo desta tese é o desenvolvimento de um novo modelo comportamental analógico de duas portas adequado à simulação em overclocking que reveste de um particular interesse nas mais recentes usos de interfaces de E/S para memória de elevadas taxas de transmissão. A eficácia e a precisão dos modelos comportamentais desenvolvidos e implementados são qualitativa e quantitativamente avaliados comparando os resultados numéricos de extracção das suas funções e de simulação transitória com o correspondente modelo de referência do estado-da-arte, IBIS.Signal integrity (SI) simulation of high-speed digital interconnected system via transistor level models is computational expensive (e.g. CPU time and memory storage), and requires the availability of physical details information of device’s internal structure. This scenario raises the interest for a behavioral modeling alternative which describes the device’s operation characteristics based on the observed input/output (I/O) electrical signal. I/O buffers that interface memory’s interconnects have major share in the computational load containing a very active complex functional part and high numbers of pins. Particularly, output buffers/drivers are forced to distort the I/O signals due to their nonlinear dynamics. In this concern, they constitute the integrated circuit (IC) bottleneck of ensuring reliable data transmission in the high-speed digital communication link. In this PhD work, the previously neglected driver’s nonlinear dynamic effects are efficiently captured to significantly reduce the state of the art black-box parametric modeling complexities and enhance the input/output buffers information specifications (IBIS). This is achieved by following the gray-box approach that merges the features of the black-box model’s formulation, the analysis of the observed I/O electrical signals and the buffer’s physical structure properties under practical operation conditions. This approach leads to physically inspired behavioral model’s construction procedure that overcomes the issues of the previous modeling approaches by optimizing the resources used at different model’s generation steps (i.e. characterization, formulation, extraction, and implementation) to mimic the driver’s nonlinear dynamic behavior. Moreover, the most important achievement is the development of a new two-port analog behavioral model for overclocking simulation that copes with the recent trends in I/O memory interfaces characterized by higher data rate transmission. The effectiveness and the accuracy of the developed and implemented behavioral models are qualitatively and quantitatively assessed by comparing the numerical results of their functions extraction and transient simulation to the ones simulated and extracted with transistor level models and the state of the art IBIS in order to validate their predictive and the generalization capabilities

A Physical Implementation with Custom Low Power Extensions of a Reconfigurable Hardware Fabric

The primary focus of this thesis is on the physical implementation of the SuperCISC Reconfigurable Hardware Fabric (RHF). The SuperCISC RHF provides a fast time to market solution that approximates the benefits of an ASIC (Application Specific Integrated Circuit) while retaining the design flow of an embedded software system. The fabric which consists of computational ALU stripes and configurable multiplexer based interconnect stripes has been implemented in the IBM 0.13um CMOS process using Cadence SoC Encounter. As the entire hardware fabric utilizes a combinational flow, glitching power consumption is a potential problem inherent to the fabric. A CMOS thyristor based programmable delay element has been designed in the IBM 0.13um CMOS process, to minimize the glitch power consumed in the hardware fabric. The delay element was characterized for use in the IBM standard cell library to synthesize standard cell ASIC designs requiring this capability such as the SuperCISC fabric. The thesis also introduces a power-gated memory solution, which can be used to increase the size of an EEPROM memory for use in SoC style applications. A macromodel of the EEPROM has been used to model the erase, program and read characteristics of the EEPROM. This memory is designed for use in the fabric for storing encryption keys, etc

Analysis and Design of Resilient VLSI Circuits

The reliable operation of Integrated Circuits (ICs) has become increasingly difficult to achieve in the deep sub-micron (DSM) era. With continuously decreasing device feature sizes, combined with lower supply voltages and higher operating frequencies, the noise immunity of VLSI circuits is decreasing alarmingly. Thus, VLSI circuits are becoming more vulnerable to noise effects such as crosstalk, power supply variations and radiation-induced soft errors. Among these noise sources, soft errors (or error caused by radiation particle strikes) have become an increasingly troublesome issue for memory arrays as well as combinational logic circuits. Also, in the DSM era, process variations are increasing at an alarming rate, making it more difficult to design reliable VLSI circuits. Hence, it is important to efficiently design robust VLSI circuits that are resilient to radiation particle strikes and process variations. The work presented in this dissertation presents several analysis and design techniques with the goal of realizing VLSI circuits which are tolerant to radiation particle strikes and process variations. This dissertation consists of two parts. The first part proposes four analysis and two design approaches to address radiation particle strikes. The analysis techniques for the radiation particle strikes include: an approach to analytically determine the pulse width and the pulse shape of a radiation induced voltage glitch in combinational circuits, a technique to model the dynamic stability of SRAMs, and a 3D device-level analysis of the radiation tolerance of voltage scaled circuits. Experimental results demonstrate that the proposed techniques for analyzing radiation particle strikes in combinational circuits and SRAMs are fast and accurate compared to SPICE. Therefore, these analysis approaches can be easily integrated in a VLSI design flow to analyze the radiation tolerance of such circuits, and harden them early in the design flow. From 3D device-level analysis of the radiation tolerance of voltage scaled circuits, several non-intuitive observations are made and correspondingly, a set of guidelines are proposed, which are important to consider to realize radiation hardened circuits. Two circuit level hardening approaches are also presented to harden combinational circuits against a radiation particle strike. These hardening approaches significantly improve the tolerance of combinational circuits against low and very high energy radiation particle strikes respectively, with modest area and delay overheads. The second part of this dissertation addresses process variations. A technique is developed to perform sensitizable statistical timing analysis of a circuit, and thereby improve the accuracy of timing analysis under process variations. Experimental results demonstrate that this technique is able to significantly reduce the pessimism due to two sources of inaccuracy which plague current statistical static timing analysis (SSTA) tools. Two design approaches are also proposed to improve the process variation tolerance of combinational circuits and voltage level shifters (which are used in circuits with multiple interacting power supply domains), respectively. The variation tolerant design approach for combinational circuits significantly improves the resilience of these circuits to random process variations, with a reduction in the worst case delay and low area penalty. The proposed voltage level shifter is faster, requires lower dynamic power and area, has lower leakage currents, and is more tolerant to process variations, compared to the best known previous approach. In summary, this dissertation presents several analysis and design techniques which significantly augment the existing work in the area of resilient VLSI circuit design

Concurrent optimization strategies for high-performance VLSI circuits

In the next generation of VLSI circuits, concurrent optimizations will be essential to achieve the performance challenges. In this dissertation, we present techniques for combining traditional timing optimization techniques to achieve a superior performance;The method of buffer insertion is used in timing optimization to either increase the driving power of a path in a circuit, or to isolate large capacitive loads that lie on noncritical or less critical paths. The procedure of transistor sizing selects the sizes of transistors within a circuit to achieve a given timing specification. Traditional design techniques perform these two optimizations as independent steps during synthesis, even though they are intimately linked and performing them in alternating steps is liable to lead to suboptimal solutions. The first part of this thesis presents a new approach for unifying transistor sizing with buffer insertion. Our algorithm achieve from 5% to 49% area reduction compared with the results of a standard transistor sizing algorithm;The next part of the thesis deals with the problem of collapsing gates for technology mapping. Two new techniques are proposed. The first method, the odd-level transistor replacement (OTR) method, performs technology mapping without the restriction of a fixed library size, and maps a circuit to a virtual library of complex static CMOS gates. The second technique, the Static CMOS/PTL method, uses a mix of static CMOS and pass transistor logic (PTL) to realize the circuit, using the relation between PTL and binary decision diagrams. The methods are very efficient and can handle all ISCAS\u2785 benchmark circuits in minutes. On average, it was found that the OTR method gave 40%, and the Static/PTL gave 50% delay reductions over SIS, with substantial area savings;Finally, we extend the technology mapping work to interleave it with placement in a single optimization. Conventional methods that perform these steps separately will not be adequate for next-generation circuits. Our approach presents an integrated solution to this problem, and shows an average of 28.19%, and a maximum of 78.42% improvement in the delay over a method that performs the two optimizations in separate steps