1,450 research outputs found
Microgrid - The microthreaded many-core architecture
Traditional processors use the von Neumann execution model, some other
processors in the past have used the dataflow execution model. A combination of
von Neuman model and dataflow model is also tried in the past and the resultant
model is referred as hybrid dataflow execution model. We describe a hybrid
dataflow model known as the microthreading. It provides constructs for
creation, synchronization and communication between threads in an intermediate
language. The microthreading model is an abstract programming and machine model
for many-core architecture. A particular instance of this model is named as the
microthreaded architecture or the Microgrid. This architecture implements all
the concurrency constructs of the microthreading model in the hardware with the
management of these constructs in the hardware.Comment: 30 pages, 16 figure
MGSim - Simulation tools for multi-core processor architectures
MGSim is an open source discrete event simulator for on-chip hardware
components, developed at the University of Amsterdam. It is intended to be a
research and teaching vehicle to study the fine-grained hardware/software
interactions on many-core and hardware multithreaded processors. It includes
support for core models with different instruction sets, a configurable
multi-core interconnect, multiple configurable cache and memory models, a
dedicated I/O subsystem, and comprehensive monitoring and interaction
facilities. The default model configuration shipped with MGSim implements
Microgrids, a many-core architecture with hardware concurrency management.
MGSim is furthermore written mostly in C++ and uses object classes to represent
chip components. It is optimized for architecture models that can be described
as process networks.Comment: 33 pages, 22 figures, 4 listings, 2 table
An evaluation of the TRIPS computer system
The TRIPS system employs a new instruction set architecture (ISA) called Explicit Data Graph Execution (EDGE) that renegotiates the boundary between hardware and software to expose and exploit concurrency. EDGE ISAs use a block-atomic execution model in which blocks are composed of dataflow instructions. The goal of the TRIPS design is to mine concurrency for high performance while tolerating emerging technology scaling challenges, such as increasing wire delays and power consumption. This paper evaluates how well TRIPS meets this goal through a detailed ISA and performance analysis. We compare performance, using cycles counts, to commercial processors. On SPEC CPU2000, the Intel Core 2 outperforms compiled TRIPS code in most cases, although TRIPS matches a Pentium 4. On simple benchmarks, compiled TRIPS code outperforms the Core 2 by 10% and hand-optimized TRIPS code outperforms it by factor of 3. Compared to conventional ISAs, the block-atomic model provides a larger instruction window, increases concurrency at a cost of more instructions executed, and replaces register and memory accesses with more efficient direct instruction-to-instruction communication. Our analysis suggests ISA, microarchitecture, and compiler enhancements for addressing weaknesses in TRIPS and indicates that EDGE architectures have the potential to exploit greater concurrency in future technologies
FIFTY YEARS OF MICROPROCESSOR EVOLUTION: FROM SINGLE CPU TO MULTICORE AND MANYCORE SYSTEMS
Nowadays microprocessors are among the most complex electronic systems that man has ever designed. One small silicon chip can contain the complete processor, large memory and logic needed to connect it to the input-output devices. The performance of today's processors implemented on a single chip surpasses the performance of a room-sized supercomputer from just 50 years ago, which cost over $ 10 million [1]. Even the embedded processors found in everyday devices such as mobile phones are far more powerful than computer developers once imagined. The main components of a modern microprocessor are a number of general-purpose cores, a graphics processing unit, a shared cache, memory and input-output interface and a network on a chip to interconnect all these components [2]. The speed of the microprocessor is determined by its clock frequency and cannot exceed a certain limit. Namely, as the frequency increases, the power dissipation increases too, and consequently the amount of heating becomes critical. So, silicon manufacturers decided to design new processor architecture, called multicore processors [3]. With aim to increase performance and efficiency these multiple cores execute multiple instructions simultaneously. In this way, the amount of parallel computing or parallelism is increased [4]. In spite of mentioned advantages, numerous challenges must be addressed carefully when more cores and parallelism are used.This paper presents a review of microprocessor microarchitectures, discussing their generations over the past 50 years. Then, it describes the currently used implementations of the microarchitecture of modern microprocessors, pointing out the specifics of parallel computing in heterogeneous microprocessor systems. To use efficiently the possibility of multi-core technology, software applications must be multithreaded. The program execution must be distributed among the multi-core processors so they can operate simultaneously. To use multi-threading, it is imperative for programmer to understand the basic principles of parallel computing and parallel hardware. Finally, the paper provides details how to implement hardware parallelism in multicore systems
Design of multimedia processor based on metric computation
Media-processing applications, such as signal processing, 2D and 3D graphics
rendering, and image compression, are the dominant workloads in many embedded
systems today. The real-time constraints of those media applications have
taxing demands on today's processor performances with low cost, low power and
reduced design delay. To satisfy those challenges, a fast and efficient
strategy consists in upgrading a low cost general purpose processor core. This
approach is based on the personalization of a general RISC processor core
according the target multimedia application requirements. Thus, if the extra
cost is justified, the general purpose processor GPP core can be enforced with
instruction level coprocessors, coarse grain dedicated hardware, ad hoc
memories or new GPP cores. In this way the final design solution is tailored to
the application requirements. The proposed approach is based on three main
steps: the first one is the analysis of the targeted application using
efficient metrics. The second step is the selection of the appropriate
architecture template according to the first step results and recommendations.
The third step is the architecture generation. This approach is experimented
using various image and video algorithms showing its feasibility
ARM Wrestling with Big Data: A Study of Commodity ARM64 Server for Big Data Workloads
ARM processors have dominated the mobile device market in the last decade due
to their favorable computing to energy ratio. In this age of Cloud data centers
and Big Data analytics, the focus is increasingly on power efficient
processing, rather than just high throughput computing. ARM's first commodity
server-grade processor is the recent AMD A1100-series processor, based on a
64-bit ARM Cortex A57 architecture. In this paper, we study the performance and
energy efficiency of a server based on this ARM64 CPU, relative to a comparable
server running an AMD Opteron 3300-series x64 CPU, for Big Data workloads.
Specifically, we study these for Intel's HiBench suite of web, query and
machine learning benchmarks on Apache Hadoop v2.7 in a pseudo-distributed
setup, for data sizes up to files, web pages and tuples. Our
results show that the ARM64 server's runtime performance is comparable to the
x64 server for integer-based workloads like Sort and Hive queries, and only
lags behind for floating-point intensive benchmarks like PageRank, when they do
not exploit data parallelism adequately. We also see that the ARM64 server
takes the energy, and has an Energy Delay Product (EDP) that
is lower than the x64 server. These results hold promise for ARM64
data centers hosting Big Data workloads to reduce their operational costs,
while opening up opportunities for further analysis.Comment: Accepted for publication in the Proceedings of the 24th IEEE
International Conference on High Performance Computing, Data, and Analytics
(HiPC), 201
- …