RoMR: Robust Multicast Routing in Mobile Ad-Hoc Networks

Support for multicast services is crucial for mobile ad-hoc networks (MANETs) to become a viable alternative to infrastructured networks. Efficient multicasting in MANETs faces challenges not encountered in other types of networks such as the mobility of nodes, the tenuous status of communication links, limited resources, and indefinite knowledge of the network topology. This thesis addresses these challenges by providing a framework and architecture with proactive and reactive components to support multicasting in MANETs emphasizing reliability and efficiency of end-to-end packet delivery. The architecture includes the Robust Multicast Routing protocol (RoMR) to provide multicast services to multicast applications. RoMR's proactive component calculates multiple multicast trees based on the prediction of future availability of the links and the assumption that the trees will become disconnected over time. The reactive components respond to changes in the network topology due to the mobility of the nodes and to changes in the multicast group's membership. Sending redundant data packets over multiple paths further enhances the reliability at the cost of an increase in the use of network resources. RoMR uses approximations to Steiner trees during tree formation and forward error correction encoding techniques during packet transmission in order to counteract this increase. To avoid additional network traffic, trees are distributed only when the existing trees cannot be easily patched to accommodate changes in topology or group membership. The novelty of the proposed protocol stems from integrating techniques that have not previously been combined into a multicasting protocol and a unique method to calculate the relative weights of the links. In addition to the specifications of the protocol, a simulation framework was developed to test different implementations of the various components of RoMR. Simulations compared the performance of the basic version of RoMR to a version that ignored link weights, and to a link-state multicast protocol currently being considered by the Internet Engineering Task Force. A statistical analysis of the results showed that RoMR performed better overall, than the other two protocols

Segment Routing: a Comprehensive Survey of Research Activities, Standardization Efforts and Implementation Results

Fixed and mobile telecom operators, enterprise network operators and cloud providers strive to face the challenging demands coming from the evolution of IP networks (e.g. huge bandwidth requirements, integration of billions of devices and millions of services in the cloud). Proposed in the early 2010s, Segment Routing (SR) architecture helps face these challenging demands, and it is currently being adopted and deployed. SR architecture is based on the concept of source routing and has interesting scalability properties, as it dramatically reduces the amount of state information to be configured in the core nodes to support complex services. SR architecture was first implemented with the MPLS dataplane and then, quite recently, with the IPv6 dataplane (SRv6). IPv6 SR architecture (SRv6) has been extended from the simple steering of packets across nodes to a general network programming approach, making it very suitable for use cases such as Service Function Chaining and Network Function Virtualization. In this paper we present a tutorial and a comprehensive survey on SR technology, analyzing standardization efforts, patents, research activities and implementation results. We start with an introduction on the motivations for Segment Routing and an overview of its evolution and standardization. Then, we provide a tutorial on Segment Routing technology, with a focus on the novel SRv6 solution. We discuss the standardization efforts and the patents providing details on the most important documents and mentioning other ongoing activities. We then thoroughly analyze research activities according to a taxonomy. We have identified 8 main categories during our analysis of the current state of play: Monitoring, Traffic Engineering, Failure Recovery, Centrally Controlled Architectures, Path Encoding, Network Programming, Performance Evaluation and Miscellaneous...Comment: SUBMITTED TO IEEE COMMUNICATIONS SURVEYS & TUTORIAL

A Survey on the Contributions of Software-Defined Networking to Traffic Engineering

Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567 Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-

Service level agreement framework for differentiated survivability in GMPLS-based IP-over-optical networks

In the next generation optical internet, GMPLS based IP-over-optical networks, ISPs will be required to support a wide variety of applications each having their own requirements. These requirements are contracted by means of the SLA. This paper describes a recovery framework that may be included in the SLA contract between ISP and customers in order to provide the required level of survivability. A key concern with such a recovery framework is how to present the different survivability alternatives including recovery techniques, failure scenario and layered integration into a transparent manner for customers. In this paper, two issues are investigated. First, the performance of the recovery framework when applying a proposed mapping procedure as an admission control mechanism in the edge router considering a smart-edge simple-core GMPLS-based IP/WDM network is considered. The second issue pertains to the performance of a pre-allocated restoration and its ability to provide protected connections under different failure scenarios

BGP-like TE Capabilities for SHIM6

In this paper we present a comprehensive set of mechanisms that restore to the site administrator the capacity of enforcing traffic engineering (TE) policies in a multiaddressed IPv6 scenario. The mechanisms rely on the ability of SHIM6 to securely perform locator changes in a transparent fashion to transport and application layers. Once an outgoing path has been selected for a communication by proper routing configuration in the site, the source prefix of SHIM6 data packets is rewritten by the site routers to avoid packet discarding due to ingress filtering. The SHIM6 locator preferences exchanged in the context establishment phase are modified by the site routers to influence in the path used for receiving traffic. Scalable deployment is ensured by the stateless nature of these mechanisms.Publicad

Service quality measurements for IPv6 inter-networks

Measurement-based performance evaluation of network traffic is becoming very important, especially for networks trying to provide differentiated levels of service quality to the different application flows. The non-identical response of flows to the different types of network-imposed performance degradation raises the need for ubiquitous measurement mechanisms, able to measure numerous performance properties, and being equally applicable to different applications and transports. This paper presents a new measurement mechanism, facilitated by the steady introduction of IPv6 in network nodes and hosts, which exploits native features of the protocol to provide support for performance measurements at the network (IP) layer. IPv6 Extension Headers have been used to carry the triggers involving the measurement activity and the measurement data in-line with the payload data itself, providing a high level of probability that the behaviour of the real user traffic flows is observed. End-to-end one-way delay, jitter, loss, and throughput have been measured for applications operating on top of both reliable and unreliable transports, over different-capacity IPv6 network configurations. We conclude that this technique could form the basis for future Internet measurements that can be dynamically deployed where and when required in a multi-service IP environment

SPAD: a distributed middleware architecture for QoS enhanced alternate path discovery

In the next generation Internet, the network will evolve from a plain communication medium into one that provides endless services to the users. These services will be composed of multiple cooperative distributed application elements. We name these services overlay applications. The cooperative application elements within an overlay application will build a dynamic communication mesh, namely an overlay association. The Quality of Service (QoS) perceived by the users of an overlay application greatly depends on the QoS experienced on the communication paths of the corresponding overlay association. In this paper, we present SPAD (Super-Peer Alternate path Discovery), a distributed middleware architecture that aims at providing enhanced QoS between end-points within an overlay association. To achieve this goal, SPAD provides a complete scheme to discover and utilize composite alternate end-to end paths with better QoS than the path given by the default IP routing mechanisms