2,115 research outputs found
Automated Exploration of the ASIC Design Space for Minimum Power-Delay-Area Product at the Register Transfer Level
Exploring the integrated circuit design space for minimum power-delay-area (PDA) product can be time-consuming and tedious, especially when the target standard-cell library has hundreds of options. In this dissertation, heuristic algorithms that automate this process have been developed, implemented and validated at the reg- ister transfer level. In some cases, the PDA product was 1.9 times better than the initial baseline solution. The parallel search algorithm exhibited 9x speed up when executed on 10 machines simultaneously. These two new methods also characterize the design space for the given RTL code by generating power-delay-area points in addition to the minimum PDA point in case the designer wishes to select a different solution that is a tradeoff among these metrics. As a final step, these two search algorithms are integrated into a fully automated ASIC design flow
Statistical Estimation of Combinational and Sequential CMOS Digital Circuit Activity Considering Uncertainty of Gate Delay Models
While estimating glitches or spurious transitions is challenge due to signal correlations, the random behavior of logic gate delays makes the estimation problem even more clifficult. In this paper, we present statistical estimation of signal activity at the internal and output nodes of combini3tional and sequential CMOS logic circuits considering uncertainty of gate delay models. The methodology is based on the stochastic models of logic signals and the probabilistic behavior of gate delays due to process variations, interconnect parmitics, etc. We propose a statistical technique of estimating average-case activity, which is flexible in adopting different delay models and variations and can be integrated with worst-case analysis into statistical logic design process. Experimental results show that the uncertainty of gate delay makes a great impact on activity at individual nodes (more than 100%) and total power dissipation as well
Recommended from our members
IC design for reliability
textAs the feature size of integrated circuits goes down to the nanometer scale,
transient and permanent reliability issues are becoming a significant concern for circuit
designers. Traditionally, the reliability issues were mostly handled at the device level as a
device engineering problem. However, the increasing severity of reliability challenges
and higher error rates due to transient upsets favor higher-level design for reliability
(DFR). In this work, we develop several methods for DFR at the circuit level.
A major source of transient errors is the single event upset (SEU). SEUs are
caused by high-energy particles present in the cosmic rays or emitted by radioactive
contaminants in the chip packaging materials. When these particles hit a N+/P+ depletion
region of an MOS transistor, they may generate a temporary logic fault. Depending on
where the MOS transistor is located and what state the circuit is at, an SEU may result in
a circuit-level error. We analyze SEUs both in combinational logic and memories
(SRAM). For combinational logic circuit, we propose FASER, a Fast Analysis tool of
Soft ERror susceptibility for cell-based designs. The efficiency of FASER is achieved
through its static and vector-less nature. In order to evaluate the impact of SEU on SRAM, a theory for estimating dynamic noise margins is developed analytically. The
results allow predicting the transient error susceptibility of an SRAM cell using a closedform
expression.
Among the many permanent failure mechanisms that include time-dependent
oxide breakdown (TDDB), electro-migration (EM), hot carrier effect (HCE), and
negative bias temperature instability (NBTI), NBTI has recently become important.
Therefore, the main focus of our work is NBTI. NBTI occurs when the gate of PMOS is
negatively biased. The voltage stress across the gate generates interface traps, which
degrade the threshold voltage of PMOS. The degraded PMOS may eventually fail to meet
timing requirement and cause functional errors. NBTI becomes severe at elevated
temperatures. In this dissertation, we propose a NBTI degradation model that takes into
account the temperature variation on the chip and gives the accurate estimation of the
degraded threshold voltage.
In order to account for the degradation of devices, traditional design methods add
guard-bands to ensure that the circuit will function properly during its lifetime. However,
the worst-case based guard-bands lead to significant penalty in performance. In this
dissertation, we propose an effective macromodel-based reliability tracking and
management framework, based on a hybrid network of on-chip sensors, consisting of
temperature sensors and ring oscillators. The model is concerned specifically with NBTIinduced
transistor aging. The key feature of our work, in contrast to the traditional
tracking techniques that rely solely on direct measurement of the increase of threshold
voltage or circuit delay, is an explicit macromodel which maps operating temperature to
circuit degradation (the increase of circuit delay). The macromodel allows for costeffective
tracking of reliability using temperature sensors and is also essential for
enabling the control loop of the reliability management system. The developed methods improve the over-conservatism of the device-level, worstcase
reliability estimation techniques. As the severity of reliability challenges continue to
grow with technology scaling, it will become more important for circuit designers/CAD
tools to be equipped with the developed methods.Electrical and Computer Engineerin
Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach
The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level
Design and modelling of variability tolerant on-chip communication structures for future high performance system on chip designs
The incessant technology scaling has enabled the integration of functionally complex System-on-Chip (SoC) designs with a large number of heterogeneous systems on a single chip. The processing elements on these chips are integrated through on-chip communication structures which provide the infrastructure necessary for the exchange of data and control signals, while meeting the strenuous physical and design constraints. The use of vast amounts of on chip communications will be central to future designs where variability is an inherent characteristic. For this reason, in this thesis we investigate the performance and variability tolerance of typical on-chip communication structures. Understanding of the relationship between variability and communication is paramount for the designers; i.e. to devise new methods and techniques for designing performance and power efficient communication circuits in the forefront of challenges presented by deep sub-micron (DSM) technologies.
The initial part of this work investigates the impact of device variability due to Random Dopant Fluctuations (RDF) on the timing characteristics of basic communication elements. The characterization data so obtained can be used to estimate the performance and failure probability of simple links through the methodology proposed in this work. For the Statistical Static Timing Analysis (SSTA) of larger circuits, a method for accurate estimation of the probability density functions of different circuit parameters is proposed. Moreover, its significance on pipelined circuits is highlighted. Power and area are one of the most important design metrics for any integrated circuit (IC) design. This thesis emphasises the consideration of communication reliability while optimizing for power and area. A methodology has been proposed for the simultaneous optimization of performance, area, power and delay variability for a repeater inserted interconnect. Similarly for multi-bit parallel links, bandwidth driven optimizations have also been performed. Power and area efficient semi-serial links, less vulnerable to delay variations than the corresponding fully parallel links are introduced. Furthermore, due to technology scaling, the coupling noise between the link lines has become an important issue. With ever decreasing supply voltages, and the corresponding reduction in noise margins, severe challenges are introduced for performing timing verification in the presence of variability. For this reason an accurate model for crosstalk noise in an interconnection as a function of time and skew is introduced in this work. This model can be used for the identification of skew condition that gives maximum delay noise, and also for efficient design verification
Modeling of glitch effects in FPGA based arithmetic circuits
Published versio
Custom Integrated Circuits
Contains reports on ten research projects.Analog Devices, Inc.IBM CorporationNational Science Foundation/Defense Advanced Research Projects Agency Grant MIP 88-14612Analog Devices Career Development Assistant ProfessorshipU.S. Navy - Office of Naval Research Contract N0014-87-K-0825AT&TDigital Equipment CorporationNational Science Foundation Grant MIP 88-5876
- …