A Survey of Automated Process Planning Approaches in Machining

Global industrial trend is shifting towards next industrial revolution Industry 4.0. It is becoming increasingly important for modern manufacturing industries to develop a Computer Integrated Manufacturing (CIM) system by integrating the various operational and information processing functions in design and manufacturing. In spite of being active in research for almost four decades, it is clear that new functionalities are needed to integrate and realize a completely optimal process planning which can be fully compliant towards Smart Factory. In order to develop a CIM system, Computer Aided Process Planning (CAPP) plays a key role and therefore it has been the focus of many researchers. In order to gain insight into the current state-of-the-art of CAPP methodologies, 96 research papers have been reviewed. Subsequent sections discuss the different CAPP approaches adopted by researchers to automate different process planning tasks. This paper aims at addressing the key approaches involved and future directions towards Smart Manufacturing

Influence of the ratio on the mechanical properties of epoxy resin composite with diapers waste as fillers for partition panel application

Materials play significant role in the domestic economy and defense with the fast growth of science and technology field. New materials are the core of fresh technologies and the three pillars of modern science and technology are materials science, power technology and data science. The prior properties of the partition panel by using recycled diapers waste depend on the origin of waste deposits and its chemical constituents. This study presents the influence of the ratio on the mechanical properties of polymer in diapers waste reinforced with binder matrix for partition panel application. The aim of this study was to investigate the influence of different ratio of diapers waste polymer reinforced epoxy-matrix with regards to mechanical properties and morphology analysis. The polymer includes polypropylene, polystyrene, polyethylene and superabsorbent polymer (SAP) were used as reinforcing material. The tensile and bending resistance for ratio of 0.4 diapers waste polymers indicated the optimum ratio for fabricating the partition panel. Samples with 0.4 ratios of diapers waste polymers have highest stiffness of elasticity reading with 76.06 MPa. A correlation between the micro structural analysis using scanning electron microscope (SEM) and the mechanical properties of the material has been discussed

Network part program approach based on the STEP-NC data structure for the machining of multiple fixture pallets

partially_open4noThe adoption of alternative process plans, that is, process plans that include alternative ways of machining a workpiece, can improve system performance through a better management of resource availability. Unfortunately even if this opportunity is deeply analysed in literature, it is not frequently adopted in real manufacturing practice. In order to fill this gap, this article presents the network part program (NPP) approach for the machining of multiple fixture pallets. The NPP approach is based on the STEP-NC data structure which supports nonlinear sequences of operations and process flexibility. In the NPP approach, a machining system supervisor defines the machining sequences and generates the related part programs just before the execution of the pallet. This article provides an approach with high scientific value and industrial applicability based on the integration of new and existing process planning methods. A real industrial case study is considered in order to show that in real applications the final quality is unaffected by the change of the sequence of the operations due to the employment of nonlinear process plans. Since the results appear very encouraging, the proposed approach is a possible solution to accelerate the adoption of nonlinear process planning in real manufacturing practice.S. Borgia; S. Pellegrinelli; S. Petro'; T. TolioBorgia, Stefano; Pellegrinelli, Stefania; Petro', Stefano; Tolio, TULLIO ANTONIO MARI

The evaluation of a novel haptic machining VR-based process planning system using an original process planning usability method

This thesis provides an original piece of work and contribution to knowledge by creating a new process planning system; Haptic Aided Process Planning (HAPP). This system is based on the combination of haptics and virtual reality (VR). HAPP creates a simulative machining environment where Process plans are automatically generated from the real time logging of a user’s interaction. Further, through the application of a novel usability test methodology, a deeper study of how this approach compares to conventional process planning was undertaken. An abductive research approach was selected and an iterative and incremental development methodology chosen. Three development cycles were undertaken with evaluation studies carried out at the end of each. Each study, the pre-pilot, pilot and industrial, identified progressive refinements to both the usability of HAPP and the usability evaluation method itself. HAPP provided process planners with an environment similar to which they are already familiar. Visual images were used to represent tools and material whilst a haptic interface enabled their movement and positioning by an operator in a manner comparable to their native setting. In this way an intuitive interface was developed that allowed users to plan the machining of parts consisting of features that can be machined on a pillar drill, 21/2D axis milling machine or centre lathe. The planning activities included single or multiple set ups, fixturing and sequencing of cutting operations. The logged information was parsed and output to a process plan including route sheets, operation sheets, tool lists and costing information, in a human readable format. The system evaluation revealed that HAPP, from an expert planners perspective is perceived to be 70% more satisfying to use, 66% more efficient in completing process plans, primarily due to the reduced cognitive load, is more effective producing a higher quality output of information and is 20% more learnable than a traditional process planning approach

A constraint-based operation sequencing for a knowledge-based process planning

Process planning is a decision-making process. Decisions on machining operations for a particular feature have to be made on various independent conditions such as which operation should be performed with which tools and under what cutting parameters. An integrated knowledge-based CAPP system called ProPlanner has been developed. The system has five modules namely information acquisition, feature recognition, machining operation planning and tool selection, set-up planning, and operation sequencing. Most process-planning systems do not produce alternative process plans. Usually, a fixed sequence created by a process plan is not necessarily the best possible sequence, Therefore, the aim should be to generate all possible operation sequences and use some optimality criteria to obtain the best sequence for the given operating environment. This paper presents an efficient heuristic algorithm, belongs to the system's operation sequencing module, for finding near-optimal operation sequences from all available process plans in a machining set-up. The costs of the various machining schemes are calculated and the machining scheme with the lowest cost is chosen. All feasible cutting tools are identified for each particular feature and the corresponding machining operations. This process is repeated for all the features in the machining set-up. All possible feature sequence combinations allowed by the current feature constraints are then generated. Appropriate cutting tools are identified and assigned to different operations. The feature sequence with the smallest number of tool changes is adopted