Pyrolysis kinetics of hydrochars produced from brewer’s spent grains

The current market situation shows that large quantities of the brewer's spent grains (BSG)-the leftovers from the beer productions-are not fully utilized as cattle feed. The untapped BSG is a promising feedstock for cheap and environmentally friendly production of carbonaceous materials in thermochemical processes like hydrothermal carbonization (HTC) or pyrolysis. The use of a singular process results in the production of inappropriate material (HTC) or insufficient economic feasibility (pyrolysis), which hinders their application on a larger scale. The coupling of both processes can create synergies and allow the mentioned obstacles to be overcome. To investigate the possibility of coupling both processes, we analyzed the thermal degradation of raw BSG and BSG-derived hydrochars and assessed the solid material yield from the singular as well as the coupled processes. This publication reports the non-isothermal kinetic parameters of pyrolytic degradation of BSG and derived hydrochars produced in three different conditions (temperature-retention time). It also contains a summary of their pyrolytic char yield at four different temperatures. The obtained KAS (Kissinger-Akahira-Sunose) average activation energy was 285, 147, 170, and 188 kJ mol(-1) for BSG, HTC-180-4, HTC-220-2, and HTC-220-4, respectively. The pyrochar yield for all hydrochar cases was significantly higher than for BSG, and it increased with the severity of the HTC's conditions. The results reveal synergies resulting from coupling both processes, both in the yield and the reduction of the thermal load of the conversion process. According to these promising results, the coupling of both conversion processes can be beneficial. Nevertheless, drying and overall energy efficiency, as well as larger scale assessment, still need to be conducted to fully confirm the concept

Combustion behaviour of some biodesulphurized coals assessed by TGA/DTA

Thermal analysis, i.e. TGA/DTA is used to study the changes in the combustion behaviour of microbially treated coals. In view of their high sulphur content and industrial significance three samples are under consideration, i.e. one lignite and two subbituminous from different region in Bulgaria. The differences in burning profiles can be related to structural changes resulted from biological treatments. The overall biological treatment generates these changes probably due to the oxidation process. Concerning organic sulphur biodesulphurization there is no change in any drastic mannerof the thermal characteristic parameters. In general, applied biotreatments provoke a complex influence on combustion coal behaviour. From one side a better ignition performance, a minor decrease in higher heating value and diminishing peak temperature of maximum weight loss rate for all biotreated samples are observed. From other side some decrease in the combustibility indicated by an increase in the combustion time and the end of combustion temperature are obvious. Also well determined decrease of self-heating temperature after biotreatments evolves high risk of spontaneous unmanageable coal combustion

Effects of wet/dry-cycling and plasma treatments on the properties of flax nonwovens intended for composite reinforcing

Producción CientíficaThis research analyzes the effects of different treatments on flax nonwoven (NW) fabrics which are intended for composite reinforcement. The treatments applied were of two different kinds: a wet/dry cycling which helps to stabilize the cellulosic fibers against humidity changes and plasma treatments with air, argon and ethylene gases considering different conditions and combinations, which produce variation on the chemical surface composition of the NWs. The resulting changes in the chemical surface composition, wetting properties, thermal stability and mechanical properties were determined. Variations in surface morphology could be observed by scanning electron microscopy (SEM). The results of the X-ray photoelectron spectroscopy (XPS) showed significant changes to the surface chemistry for the samples treated with argon or air (with more content on polar groups on the surface) and ethylene plasma (with less content of polar groups). Although only slight differences were found in moisture regain and water retention values (WRV), significant changes were found on the contact angle values, thus revealing hydrophilicity for the air-treated and argon-treated samples and hydrophobicity for the ethylene-treated ones. Moreover, for some of the treatments the mechanical testing revealed an increase of the NW breaking force.Ministerio de Educación y Formación Profesional (grants BIA2014-59399-R and FPU12/05869

Combustion behaviour of some biodesulphurized coals assessed by TGA/DTA

Thermal analysis, i.e. TGA/DTA is used to study the changes in the combustion behaviour of microbially treated coals. In view of their high sulphur content and industrial significance three samples are under consideration, i.e. one lignite and two subbituminous from different region in Bulgaria. The differences in burning profiles can be related to structural changes resulted from biological treatments. The overall biological treatment generates these changes probably due to the oxidation process. Concerning organic sulphur biodesulphurization there is no change in any drastic mannerof the thermal characteristic parameters. In general, applied biotreatments provoke a complex influence on combustion coal behaviour. From one side a better ignition performance, a minor decrease in higher heating value and diminishing peak temperature of maximum weight loss rate for all biotreated samples are observed. From other side some decrease in the combustibility indicated by an increase in the combustion time and the end of combustion temperature are obvious. Also well determined decrease of self-heating temperature after biotreatments evolves high risk of spontaneous unmanageable coal combustion

Does organic modification of layered double hydroxides improve the fire performance of PMMA?

The effect of modified layered double hydroxides (LDHs) on fire properties of poly(methyl methacrylate) is investigated. Organically-modified LDHs were prepared via rehydration of calcined hydrotalcite in a palmitate solution. Composites consisting of the organo-LDHs, unmodified hydrotalcite and calcined oxides were prepared with poly(methyl methacrylate) using melt blending. Thermal and fire properties of the (nano)composites were studied. The thermogravimetric analyses of the composites show an increase in thermal stability. Fire performance, evaluated using cone calorimetry, show that organically-modified LDHs composites give the best reductions in peak heat release rate, PHRR, i.e., 51% at 10% weight loading. Dispersion of the LDHs was characterized using transmission electron microscopy and X–ray diffraction. Nanocomposite formation was observed with organically-modified LDHs, while the unmodified LDH composites gave only microcomposites

Determination of the degree of reaction of fly ash in blended cement pastes

This paper gives a review over methods to determine the degree of reaction for supplementary cementitious materials (SCMs) with focus on Portland cement - fly ash blends only and summarizes and highlights the most important findings which are detailed in a parallel paper published in Materials and Structures. Determination of the extent of the reaction of SCMs in mixtures is complicated for several reasons: (1) the physical presence of SCMs affects the rate and extent of the reaction of the ground clinker component – the so called “filler effect”; (2) SCMs are usually amorphous with complex and varied mineralogy which make them difficult to quantify by many classical techniques such as X-ray diffraction; (3) the rate of reaction of SCMs in a cement blend may be quite different from its rate of reaction in systems containing simply alkali or lime. From this review it is clear that measuring the degree of reaction of SCMs remains challenging. Nevertheless progress has been made in recent years to offer alternatives to the traditional selective dissolution methods. Unfortunately some of these – image analysis and EDS mapping in the scanning electron microscope, and NMR - depend on access to expensive equipment and are time consuming. With regard to fly ashes, NMR seems to be reliable but limited to fly ash with low iron content. New methods with quantitative EDS mapping to segment fly ash particles from the hydrated matrix and to follow the reaction of glass groups of disparate composition separately look very promising, but time consuming. Sources with a high proportion of fine particles will have higher errors due to lower limit of resolution (1-2 μm). Whereas for SCMs which react relatively fast (e.g. slag, calcined clay) the methods based on calorimetry and chemical shrinkage seem promising on a comparative basis, the very low reaction degree of fly ashes before 28 days means that the calorimetry method is not practical. There is a lack of data to assess the usefulness of long term chemical shrinkage measurements. The possibility to quantify the amorphous phase by XRD is promising as this is a widely available and rapid technique which can at the same time give a wealth of additional information on the phases formed. However, the different reaction rates of different glasses in compositionally heterogeneous fly ashes will need to be accounted for and may strongly reduce the accuracy of the profile decomposition method. This paper is the work of working group 2 of the RILEM TC 238-SCM “Hydration and microstructure of concrete with supplementary cementitious materials”

The Influence of Body Size and Hemoglobin Multiplicity on Critical Oxygen Threshold in Red Drum (Sciaenops ocellatus)

Hypoxia is common in marine environments and fishes use a suite of cardiorespiratory adjustments to defend aerobic metabolism, including reducing standard metabolic rate (SMR), the minimum metabolic rate needed to sustain life at a specified temperature, or increasing hemoglobin (Hb)-O2 affinity. Nonetheless, hypoxia can constrain oxygen transport whereby fish cannot accommodate standard metabolic rate; a point known as critical oxygen tension (Pcrit). Currently, it is unclear how life history traits may impact Pcrit, but available data on red drum (Sciaenops ocellatus) suggest that its SMR decreases with size, and its transcriptome contains multiple Hb-α and Hb-β subunits. Therefore we sought to explore the influence of body size and acclimation to hypoxia. Critical oxygen tension (Pcrit) was measured for fish over a 2500-fold range in mass (0.26 - 686 g) and surprisingly showed an increase (Pcrit = 3.15 logM + 16.19; R2 = 0.44) despite decreasing SMR. Two groups of S. ocellatus (90.96 ± 5.00 g ranging from 69.7 g to 141.9 g) were also subjected to either normoxia ( > 95% P_(O_2 )) or hypoxia (30%±5% P_(O_2 )) treatment for two weeks. Only fish subjected to hypoxia treatment showed a statistically significant decrease in Pcrit after the treatment. Acclimation had no impact on gill surface area, diffusion distance or relative ventricular mass, but mRNA expression levels of the major Hb-α subunit switched from Hbα-3.1 in the normoxia group to Hbα-3.2 in the hypoxia treatment group and expression levels of Hbα-2, Hbα-3.2 and Hbβ-3.1 showed a statistically significant increase in the hypoxia treatment group. Decrease in P50 and thus an increase in Hb-O2 binding affinity was observed for fish subjected to hypoxia treatment. Taken together these data indicate that hypoxia tolerance is affected by both developmental stage and hypoxia acclimation.Integrative Biolog

Preliminary investigation on auto-thermal extrusion of ground tire rubber

Ground tire rubber (GTR) was processed using an auto-thermal extrusion as prerequisite to green reclaiming of GTR. The reclaimed GTR underwent a series of tests: thermogravimetric analysis combined with Fourier-transform infrared spectroscopy (TGA-FTIR), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and static headspace and gas chromatography-mass spectrometry (SHS-GC-MS) in order to evaluate the impact of barrel heating solution (with/without external barrel heating) on reclaiming process of GTR. Moreover, samples were cured to assess the impact of reclaiming heating solution on curing characteristics and physico-mechanical properties. Detailed analysis of the results indicated that the heat supplied by the machinery was replaced by energy generated due to the high shearing phenomenon, what significantly influenced energy consumption and hereby lowered processing costPostprint (published version