A computationally efficient method for hand–eye calibration

Purpose: Surgical robots with cooperative control and semiautonomous features have shown increasing clinical potential, particularly for repetitive tasks under imaging and vision guidance. Effective performance of an autonomous task requires accurate hand–eye calibration so that the transformation between the robot coordinate frame and the camera coordinates is well defined. In practice, due to changes in surgical instruments, online hand–eye calibration must be performed regularly. In order to ensure seamless execution of the surgical procedure without affecting the normal surgical workflow, it is important to derive fast and efficient hand–eye calibration methods. Methods: We present a computationally efficient iterative method for hand–eye calibration. In this method, dual quaternion is introduced to represent the rigid transformation, and a two-step iterative method is proposed to recover the real and dual parts of the dual quaternion simultaneously, and thus the estimation of rotation and translation of the transformation. Results: The proposed method was applied to determine the rigid transformation between the stereo laparoscope and the robot manipulator. Promising experimental and simulation results have shown significant convergence speed improvement to 3 iterations from larger than 30 with regard to standard optimization method, which illustrates the effectiveness and efficiency of the proposed method

Cameras and Inertial/Magnetic Sensor Units Alignment Calibration

Due to the external acceleration interference/ magnetic disturbance, the inertial/magnetic measurements are usually fused with visual data for drift-free orientation estimation, which plays an important role in a wide variety of applications, ranging from virtual reality, robot, and computer vision to biomotion analysis and navigation. However, in order to perform data fusion, alignment calibration must be performed in advance to determine the difference between the sensor coordinate system and the camera coordinate system. Since orientation estimation performance of the inertial/magnetic sensor unit is immune to the selection of the inertial/magnetic sensor frame original point, we therefore ignore the translational difference by assuming the sensor and camera coordinate systems sharing the same original point and focus on the rotational alignment difference only in this paper. By exploiting the intrinsic restrictions among the coordinate transformations, the rotational alignment calibration problem is formulated by a simplified hand–eye equation AX = XB (A, X, and B are all rotation matrices). A two-step iterative algorithm is then proposed to solve such simplified handeye calibration task. Detailed laboratory validation has been performed and the good experimental results have illustrated the effectiveness of the proposed alignment calibration method

Robust and Optimal Methods for Geometric Sensor Data Alignment

Geometric sensor data alignment - the problem of finding the rigid transformation that correctly aligns two sets of sensor data without prior knowledge of how the data correspond - is a fundamental task in computer vision and robotics. It is inconvenient then that outliers and non-convexity are inherent to the problem and present significant challenges for alignment algorithms. Outliers are highly prevalent in sets of sensor data, particularly when the sets overlap incompletely. Despite this, many alignment objective functions are not robust to outliers, leading to erroneous alignments. In addition, alignment problems are highly non-convex, a property arising from the objective function and the transformation. While finding a local optimum may not be difficult, finding the global optimum is a hard optimisation problem. These key challenges have not been fully and jointly resolved in the existing literature, and so there is a need for robust and optimal solutions to alignment problems. Hence the objective of this thesis is to develop tractable algorithms for geometric sensor data alignment that are robust to outliers and not susceptible to spurious local optima. This thesis makes several significant contributions to the geometric alignment literature, founded on new insights into robust alignment and the geometry of transformations. Firstly, a novel discriminative sensor data representation is proposed that has better viewpoint invariance than generative models and is time and memory efficient without sacrificing model fidelity. Secondly, a novel local optimisation algorithm is developed for nD-nD geometric alignment under a robust distance measure. It manifests a wider region of convergence and a greater robustness to outliers and sampling artefacts than other local optimisation algorithms. Thirdly, the first optimal solution for 3D-3D geometric alignment with an inherently robust objective function is proposed. It outperforms other geometric alignment algorithms on challenging datasets due to its guaranteed optimality and outlier robustness, and has an efficient parallel implementation. Fourthly, the first optimal solution for 2D-3D geometric alignment with an inherently robust objective function is proposed. It outperforms existing approaches on challenging datasets, reliably finding the global optimum, and has an efficient parallel implementation. Finally, another optimal solution is developed for 2D-3D geometric alignment, using a robust surface alignment measure. Ultimately, robust and optimal methods, such as those in this thesis, are necessary to reliably find accurate solutions to geometric sensor data alignment problems

A branch-and-bound algorithm for checkerboard extraction in camera-laser calibration

We address the problem of camera-to-laserscanner calibration using a checkerboard and multiple imagelaser scan pairs. Distinguishing which laser points measure the checkerboard and which lie on the background is essential to any such system. We formulate the checkerboard extraction as a combinatorial optimization problem with a clear cut objective function. We propose a branch-and-bound technique that deterministically and globally optimizes the objective. Unlike what is available in the literature, the proposed method is not heuristic and does not require assumptions such as constraints on the background or relying on discontinuity of the range measurements to partition the data into line segments. The proposed approach is generic and can be applied to both 3D or 2D laser scanners as well as the cases where multiple checkerboards are present. We demonstrate the effectiveness of the proposed approach by providing numerical simulations as well as experimental results.Alireza Khosravian, Tat-Jun Chin, Ian Rei

Proceedings of the 2009 Joint Workshop of Fraunhofer IOSB and Institute for Anthropomatics, Vision and Fusion Laboratory

The joint workshop of the Fraunhofer Institute of Optronics, System Technologies and Image Exploitation IOSB, Karlsruhe, and the Vision and Fusion Laboratory (Institute for Anthropomatics, Karlsruhe Institute of Technology (KIT)), is organized annually since 2005 with the aim to report on the latest research and development findings of the doctoral students of both institutions. This book provides a collection of 16 technical reports on the research results presented on the 2009 workshop