O pior caso estático de otimização do tempo de execução utilizando dpso para arquitetura ASIP

Introduction: The application of specific instructions significantly improves energy, performance, and code size of configurable processors. The design of these instructions is performed by the conversion of patterns related to application-specific operations into effective complex instructions. This research was presented at the icitkm Conference, University of Delhi, India in 2017. Methods: Static analysis was a prominent research method during late the 1980’s. However, end-to-end measurements consist of a standard approach in industrial settings. Both static analysis tools perform at a high-level in order to determine the program structure, which works on source code, or is executable in a disassembled binary. It is possible to work at a low-level if the real hardware timing information for the executable task has the desired features. Results: We experimented, tested and evaluated using a H.264 encoder application that uses nine cis, covering most of the computation intensive kernels. Multimedia applications are frequently subject to hard real time constraints in the field of computer vision. The H.264 encoder consists of complicated control flow with more number of decisions and nested loops. The parameters evaluated were different numbers of A partitions (300 slices on a Xilinx Virtex 7each), reconfiguration bandwidths, as well as relations of cpu frequency and fabric frequency fCPU/ffabric. ffabric remains constant at 100MHz, and we selected a multiplicity of its values for fCPU that resemble realistic units. Note that while we anticipate the wcet in seconds (wcetcycles/ f CPU) to be lower (better) with higher fCPU, the wcet cycles increase (at a constant ffabric) because hardware cis perform less computations on the reconfigurable fabric within one cpu cycle.    Introducción: la aplicación de instrucciones específicas mejora significativamente la energía, el rendimiento y el tamaño del código de los procesadores configurables. El diseño de estas instrucciones se realiza mediante conversión de patrones relacionados con operaciones específicas de la aplicación con instrucciones complejas y efectivas. Esta investigación se presentó en la Conferencia icitkm, Universidad de Delhi, India en 2017. Métodos: el análisis estático fue un método de investigación prominente durante la década de 1980; sin embargo, las mediciones de extremo a extremo son un enfoque convencional en los entornos industriales. Ambas herramientas de análisis estático se desempeñan a un alto nivel para determinar la estructura del programa que funciona en el código fuente, o que se ejecuta en un binario desmontado. Es posible trabajar a bajo nivel si la información de tiempo de hardware real para la tarea ejecutable presenta las características deseadas.  Introdução: a aplicação de instruções específicas melhora significativamente a energia, o desempenho e o tamanho do código dos processadores configuráveis. O desenho dessas instruções é realizado mediante a conversão de padrões relacionados com operações específicas da aplicação com instruções complexas e efetivas. Esta pesquisa foi apresentada na Conferência icitkm, Universidade de Délhi, Índia em 2017.Métodos: a análise estática foi um método de pesquisa proeminente durante a década de 1980; contudo, as medições de extremo a extremo são uma abordagem convencional nos contextos industriais. Ambas as ferramentas de análise estática se desempenham a um alto nível para determinar a estrutura do programa que funciona no código fonte ou que se executa num binário desmontado. É possível trabalhar a baixo nível se a informação de tempo de hardware real para a tarefa executável apresentar as características desejadas.Resultados: experimentamos, testamos e avaliamos com uma aplicação de codificação H.264 que utiliza nove elementos de configuração e cobre a maioria dos núcleos de cálculo intensivo. As aplicações multimídias estão com frequência sujeitas a duras restrições em tempo real no campo da visão por computador. O codificador H.264 consiste num complicado fluxo de controle com mais número de decisões e circuitos aninhados. Os parâmetros avaliados foram de diferentes números de particiones A (300 cortes num Xilinx Virtex 7 cada um) e largos de banda de reconfiguração, bem como de relações de frequência de cpu e frequência de fabric fcpu/ffabric. ffabric permanece constante a 100MHz. Selecionamos vários de seus valores para fcpu que são semelhantes a unidades realistas. É importante considerar que, ainda quando antecipamos o wcet em segundos (ciclos wcet/ fcpu), para que fossem inferiores (melhores) com fcpu mais alta, os ciclos wcet aumentam (num tecido constante f) porque os ci de hardware realizam menos cálculos no tecido reconfigurável dentro de uma cpu de ciclo.Conclusões: o método é similar à hibridação de árvores e métodos baseados en rotas, os quais são menos precisos, e ao método I pet global, que é mais preciso. A otimização é avaliada com o algoritmo de otimização por enxame de partículas discretas (dpso) para wcet. Para várias aplicações do mundo real que envolvem processadores integrados, a técnica proposta desenvolve conjuntos de instruções melhoradas em comparação com os conjuntos de instruções nativas.Originalidade: para a estimativa de wcet, deve-se considerar a análise de fluxo, a análise de baixo nível e as fases de cálculo do programa. A fase de análise de fluxo ou alto nível de análise ajuda a extrair o comportamento dinâmico do programa que proporciona informação sobre as funções invocadas, sobre o número de iterações de circuito, as dependências entre sentenças if, etc. Isso se deve a que a análise desconhece a rota de execução correspondente ao tempo de execução mais longo.Limitações: essa rota é executada dentro de uma iteração do núcleo que depende da natureza de mb, seja i-mb, seja p-mb, determinada pelo núcleo de estimativa de movimento, quer dizer que sua entrada depende das rotas i-mb e p-mb, que também contêm elementos de configuração separados que conduzem à instabilidade da rota do pior dos casos; em outras palavras, adicionar mais partições à rota atual do pior dos casos pode fazer com que a outra rota se converta no pior dos casos. A tubulação se detém pela demora de reconfiguração e continua ao ingressar no núcleo assim que finaliza o processo de reconfiguraçã

Worst-Case Execution Time Analysis of Parallel Systems

The problem of finding the Worst-Case Execution Time, WCET, of a program executed on a specific hardware architecture is a very challenging task. A lot of effort has been put into analysing sequential programs executing on single-core hardware. The result is a variety of different methods and tools. The author currently works on finding methods for static WCET analysis of parallel software. The emphasis of the work is put on analysing the impact of synchronisation between threads executing on a shared memory architecture. The analysis is done on the software level, so less focus is put on the effects of the actual hardware on which the parallel program executes. The analysis is based on a small parallel programming language incorporating some fundamental synchronisation primitives; locking and unlocking of shared resources. The programming language is formally defined, which allows the correctness of the analysis to be proven

Generalizing List Scheduling for Stochastic Soft Real-time Parallel Applications

Advanced architecture processors provide features such as caches and branch prediction that result in improved, but variable, execution time of software. Hard real-time systems require tasks to complete within timing constraints. Consequently, hard real-time systems are typically designed conservatively through the use of tasks? worst-case execution times (WCET) in order to compute deterministic schedules that guarantee task?s execution within giving time constraints. This use of pessimistic execution time assumptions provides real-time guarantees at the cost of decreased performance and resource utilization. In soft real-time systems, however, meeting deadlines is not an absolute requirement (i.e., missing a few deadlines does not severely degrade system performance or cause catastrophic failure). In such systems, a guaranteed minimum probability of completing by the deadline is sufficient. Therefore, there is considerable latitude in such systems for improving resource utilization and performance as compared with hard real-time systems, through the use of more realistic execution time assumptions. Given probability distribution functions (PDFs) representing tasks? execution time requirements, and tasks? communication and precedence requirements, represented as a directed acyclic graph (DAG), this dissertation proposes and investigates algorithms for constructing non-preemptive stochastic schedules. New PDF manipulation operators developed in this dissertation are used to compute tasks? start and completion time PDFs during schedule construction. PDFs of the schedules? completion times are also computed and used to systematically trade the probability of meeting end-to-end deadlines for schedule length and jitter in task completion times. Because of the NP-hard nature of the non-preemptive DAG scheduling problem, the new stochastic scheduling algorithms extend traditional heuristic list scheduling and genetic list scheduling algorithms for DAGs by using PDFs instead of fixed time values for task execution requirements. The stochastic scheduling algorithms also account for delays caused by communication contention, typically ignored in prior DAG scheduling research. Extensive experimental results are used to demonstrate the efficacy of the new algorithms in constructing stochastic schedules. Results also show that through the use of the techniques developed in this dissertation, the probability of meeting deadlines can be usefully traded for performance and jitter in soft real-time systems

Control flow graphs for real-time systems analysis: reconstruction from binary executables and usage in ILP-based path analysis

Real-time systems have to complete their actions w.r.t. given timing constraints. In order to validate that these constraints are met, static timing analysis is usually performed to compute an upper bound of the worst-case execution times (WCET) of all the involved tasks. This thesis identifies the requirements of real-time system analysis on the control flow graph that the static analyses work on. A novel approach is presented that extracts a control flow graph from binary executables, which are typically used when performing WCET analysis of real-time systems. Timing analysis can be split into two steps: a) the analysis of the behaviour of the hardware components, b) finding the worst-case path. A novel approach to path analysis is described in this thesis that introduces sophisticated interprocedural analysis techniques that were not available before.Echtzeitsysteme müssen ihre Aufgaben innerhalb vorgegebener Zeitschranken abwickeln. Um die Einhaltung der Zeitschranken zu überprüfen, sind für gewöhnlich statische Analysen der schlimmsten Ausführzeiten der Teilprogramme des Echtzeitsystems nötig. Diese Arbeit stellt die Anforderungen von Echtzeitsystem an den Kontrollflussgraphen vor, auf dem die statischen Analysen arbeiten. Ein neuartiger Ansatz zur Rückberechnung von Kontrollflußgraphen aus Maschinenprogrammen, die häufig die Grundlage der WCET-Analyse von Echtzeitsystemen bilden, wird vorgestellt. WCET-Analysen können in zwei Teile zerlegt werden: a) die Analyse des Verhaltens der Hardwarebausteine, b) die Suche nach dem schlimmsten Ausführpfad. In dieser Arbeit wird ein neuartiger Ansatz der Pfadanalyse vorgestellt, der für ausgefeilte interprozedurale Analysemethoden ausgelegt ist, die vorher hier nicht verfügbar waren

Control flow graphs for real-time systems analysis: reconstruction from binary executables and usage in ILP-based path analysis

Real-time systems have to complete their actions w.r.t. given timing constraints. In order to validate that these constraints are met, static timing analysis is usually performed to compute an upper bound of the worst-case execution times (WCET) of all the involved tasks. This thesis identifies the requirements of real-time system analysis on the control flow graph that the static analyses work on. A novel approach is presented that extracts a control flow graph from binary executables, which are typically used when performing WCET analysis of real-time systems. Timing analysis can be split into two steps: a) the analysis of the behaviour of the hardware components, b) finding the worst-case path. A novel approach to path analysis is described in this thesis that introduces sophisticated interprocedural analysis techniques that were not available before.Echtzeitsysteme müssen ihre Aufgaben innerhalb vorgegebener Zeitschranken abwickeln. Um die Einhaltung der Zeitschranken zu überprüfen, sind für gewöhnlich statische Analysen der schlimmsten Ausführzeiten der Teilprogramme des Echtzeitsystems nötig. Diese Arbeit stellt die Anforderungen von Echtzeitsystem an den Kontrollflussgraphen vor, auf dem die statischen Analysen arbeiten. Ein neuartiger Ansatz zur Rückberechnung von Kontrollflußgraphen aus Maschinenprogrammen, die häufig die Grundlage der WCET-Analyse von Echtzeitsystemen bilden, wird vorgestellt. WCET-Analysen können in zwei Teile zerlegt werden: a) die Analyse des Verhaltens der Hardwarebausteine, b) die Suche nach dem schlimmsten Ausführpfad. In dieser Arbeit wird ein neuartiger Ansatz der Pfadanalyse vorgestellt, der für ausgefeilte interprozedurale Analysemethoden ausgelegt ist, die vorher hier nicht verfügbar waren