Automotive applications of high precision GNSS

This thesis aims to show that Global Navigation Satellite Systems (GNSS) positioning can play a significant role in the positioning systems of future automotive applications. This is through the adoption of state-of-the-art GNSS positioning technology and techniques, and the exploitation of the rapidly developing vehicle-to-vehicle concept. The merging together of these two developments creates greater performance than can be achieved separately. The original contribution of this thesis comes from this combination: Through the introduction of the Pseudo-VRS concept. Pseudo-VRS uses the princples of Network Real Time Kinematic (N-RTK) positioning to share GNSS information between vehicles, which enables absolute vehicle positioning. Pseudo-VRS is shown to improve the performance of high precision GNSS positioning for road vehicles, through the increased availability of GNSS correction messages and the rapid resolution of the N-RTK fixed solution. Positioning systems in the automotive sector are dominated by satellite-based solutions provided by GNSS. This has been the case since May 2001, when the United States Department of Defense switched off Selective Availability, enabling significantly improved positioning performance for civilian users. The average person most frequently encounters GNSS when using electronic personal navigation devices. The Sat Nav or GPS Navigator is ubiquitous in modern societies, where versions can be found on nomadic devices such as smartphones and dedicated personal navigation devices, or built in to the dashboards of vehicles. Such devices have been hugely successful due to their intrinsic ability to provide position information anywhere in the world with an accuracy of approximately 10 metres, which has proved ideal for general navigation applications. There are a few well known limitations of GNSS positioning, including anecdotal evidence of incorrect navigation advice for personal navigation devices, but these are minor compared to the overall positioning performance. Through steady development of GNSS positioning devices, including the integration of other low cost sensors (for instance, wheel speed or odometer sensors in vehicles), and the development of robust map matching algorithms, the performance of these devices for navigation applications is truly incredible. However, when tested for advanced automotive applications, the performance of GNSS positioning devices is found to be inadequate. In particular, in the most advanced fields of research such as autonomous vehicle technology, GNSS positioning devices are relegated to a secondary role, or often not used at all. They are replaced by terrestrial sensors that provide greater situational awareness, such as radar and lidar. This is due to the high performance demand of such applications, including high positioning accuracy (sub-decimetre), high availability and continuity of solutions (100%), and high integrity of the position information. Low-cost GNSS receivers generally do not meet such requirements. This could be considered an enormous oversight, as modern GNSS positioning technology and techniques have significantly improved satellite-based positioning performance. Other non-GNSS techniques also have their limitations that GNSS devices can minimise or eliminate. For instance, systems that rely on situational awareness require accurate digital maps of their surroundings as a reference. GNSS positioning can help to gather this data, provide an input, and act as a fail-safe in the event of digital map errors. It is apparent that in order to deliver advanced automotive applications - such as semi- or fully-autonomous vehicles - there must be an element of absolute positioning capability. Positioning systems will work alongside situational awareness systems to enable the autonomous vehicles to navigate through the real world. A strong candidate for the positioning system is GNSS positioning. This thesis builds on work already started by researchers at the University of Nottingham, to show that N-RTK positioning is one such technique. N-RTK can provide sub-decimetre accuracy absolute positioning solutions, with high availability, continuity, and integrity. A key component of N-RTK is the availability of real-time GNSS correction data. This is typically delivered to the GNSS receiver via mobile internet (for a roving receiver). This can be a significant limitation, as it relies on the performance of the mobile communications network, which can suffer from performance degradation during dynamic operation. Mobile communications systems are expected to improve significantly over the next few years, as consumers demand faster download speeds and wider availability. Mobile communications coverage already covers a high percentage of the population, but this does not translate into a high percentage of a country's geography. Pockets of poor coverage, often referred to as notspots, are widespread. Many of these notspots include the transportation infrastructure. The vehicle-to-vehicle concept has made significant forward steps in the last few years. Traditionally promoted as a key component of future automotive safety applications, it is now driven primarily by increased demand for in-vehicle infotainment. The concept, which shares similarities with the Internet of Things and Mobile Ad-hoc Networks, relies on communication between road vehicles and other road agents (such as pedestrians and road infrastructure). N-RTK positioning can take advantage of this communication link to minimise its own communications-related limitations. Sharing GNSS information between local GNSS receivers enables better performance of GNSS positioning, based on the principles of differential GNSS and N-RTK positioning techniques. This advanced concept is introduced and tested in this thesis. The Pseudo VRS concept follows the protocols and format of sharing GNSS data used in N-RTK positioning. The technique utilises the latest GNSS receiver design, including multiple frequency measurements and high quality antennas

Kinematic GNSS tropospheric estimation and mitigation over a range of altitudes

PhD ThesisThis thesis investigates the potential for estimating tropospheric delay from Global Navigation Satellite Systems (GNSS) stations on moving platforms experiencing a change in altitude. The ability to accurately estimate tropospheric delay in kinematic GNSS positioning has implications for improved height accuracy due to the mitigation of a major GNSS error source, and for the collection of atmospheric water vapour data for meteorology and climate studies. The potential for extending current kinematic GNSS positioning estimates of tropospheric delay from sea level based studies to airborne experiments, and the achievable height accuracy from a range of tropospheric mitigation strategies used in airborne GNSS positioning, are explored. An experiment was established at the Snowdon Mountain Railway (SMR), utilising the railway to collect a repeatable kinematic dataset, profiling 950 m of the lower atmosphere over a 50 day period. GNSS stations on stable platforms and meteorological sensors were installed at the extremities of the trajectory, allowing reference tropospheric delays and coordinates to be established. The retrieval of zenith wet delay (ZWD) from kinematic GNSS solutions using tropospheric estimation strategies is validated against an interpolated reference ZWD between GNSS stations on stable platforms, together with profiles from 100 m resolution runs of the UK Met Office Unified Model. Agreement between reference ZWD values and a combined GPS+GLONASS precise point positioning (PPP) solution is demonstrated with an accuracy of 11.6 mm (RMS), similar to a relative positioning solution and previous shipborne studies. The impact on the height accuracy from estimating tropospheric delay in kinematic GNSS positioning is examined by comparing absolute and relative GNSS positioning solutions to a reference trajectory generated from a relative GNSS positioning solution ii processed with reference to the GNSS stations on stable platforms situated at the extremities of the SMR. A height accuracy with a standard deviation of 72 mm was demonstrated for the GPS+GLONASS PPP solution, similar to a GPS-only relative solution, and providing an improvement over the GPS-only PPP solution.UK Natural Environment Research Council (NERC) studentship, and part of the work was funded by the Royal Institution of Chartered Surveyors (RICS) Education Trust

International GNSS Service: Technical Report 2021

Applications of the Global Navigation Satellite Systems (GNSS) to Earth Sciences are numerous. The International GNSS Service (IGS), a voluntary federation of government agencies, universities and research institutions, combines GNSS resources and expertise to provide the highest–quality GNSS data, products, and services in order to support high–precision applications for GNSS–related research and engineering activities. This IGS Technical Report 2021 includes contributions from the IGS Governing Board, the Central Bureau, Analysis Centers, Data Centers, station and network operators, working groups, pilot projects, and others highlighting status and important activities, changes and results that took place and were achieved during 2021

Precise positioning in real-time using GPS-RTK signal for visually impaired people navigation system

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University, 24/9/2010.This thesis presents the research carried out to investigate and achieve highly reliable and accurate navigation system of guidance for visually impaired pedestrians. The main aim with this PhD project has been to identify the limits and insufficiencies in utilising Network Real-Time Kinematic Global Navigation Satellite Systems (NRTK GNSS) and its augmentation techniques within the frame of pedestrian applications in a variety of environments and circumstances. Moreover, the system can be used in many other applications, including unmanned vehicles, military applications, police, etc. NRTK GNSS positioning is considered to be a superior solution in comparison to the conventional standalone Global Positioning System (GPS) technique whose accuracy is highly affected by the distance dependent errors such as satellite orbital and atmospheric biases. Nevertheless, NRTK GNSS positioning is particularly constrained by wireless data link coverage, delays of correction and transmission and completeness, GPS and GLONASS signal availability, etc., which could downgrade the positioning quality of the NRTK results. This research is based on the dual frequency NRTK GNSS (GPS and GLONASS). Additionally, it is incorporated into several positioning and communication methods responsible for data correction while providing the position solutions, in which all identified contextual factors and application requirements are accounted. The positioning model operates through client-server based architecture consisted of a Navigation Service Centre (NSC) and a Mobile Navigation Unit (MNU). Hybrid functional approaches were consisting of several processing procedures allowing the positioning model to operate in position determination modes. NRTK GNSS and augmentation service is used if enough navigation information was available at the MNU using its local positioning device (GPS/GLONASS receiver).The positioning model at MNU was experimentally evaluated and centimetric accuracy was generally attained during both static and kinematic tests in various environments (urban, suburban and rural). This high accuracy was merely affected by some level of unavailability mainly caused by GPS and GLONASS signal blockage. Additionally, the influence of the number of satellites in view, dilution of precision (DOP) and age corrections (AoC) over the accuracy and stability of the NRTK GNSS solution was also investigated during this research and presented in the thesis. This positioning performance has outperformed the existing GPS service. In addition, utilising a simulation evaluation facility the positioning model at MNU performance was quantified with reference to a hybrid positioning service that will be offered by future Galileo Open Service (OS) along with GPS. However, a significant difference in terms of the service availability for the advantage of the hybrid system was experienced in all remaining scenarios and environments more especially the urban areas due to surrounding obstacles and conditions. As an outcome of this research a new and precise positioning model was proposed. The adaptive framework is understood as approaching an integration of the available positioning technology into the context of surrounding wireless communication for a maintainable performance. The positioning model has the capability of delivering indeed accurate, precise and consistent position solutions, and thus is fulfilling the requirements of visually impaired people navigation application, as identified in the adaptive framework

Adaptive Localisation for Unmanned Surface Vehicles Using IMU-Interacting Multiple Model

Unscented Kalman Filter (UKF) remains to be a prevalent multi-sensor fusion method in many practices, including navigational tracking for Unmanned Surface Vehicles (USVs). This paper suggests that results from UKF fusion is unsatisfactory for USVs’ relatively smooth path due to UKF’s lack of versatility. Hence, it is proposed here that by replacing the UKF with Interacting Multiple Model (IMM), estimation results will better represent USV’s movement. Furthermore, this paper proposes slight modification to the IMM in order to heighten the algorithm’s confidence in switching modes. By exploiting angular velocity information from Inertial Measurement Unit (IMU), an independent mode probability can be obtained which is then injected into the IMM. Computer simulations based on maritime operations were done to show that the proposed IMU-based IMM is able to react faster to mode changes, giving more reliable outcomes

International Laser Ranging Service (ILRS) 2003-2004 Annual Report

The International Laser Ranging Service (ILRS) organizes and coordinates Satellite Laser Ranging (SLR) and Lunar Laser Ranging (LLR) to support programs in geodetic, geophysical, and lunar research activities and provides the International Earth Rotation and Reference Systems Service (IERS) with products important to the maintenance of an accurate International Terrestrial Reference Frame (ITRF). This reference frame provides the stability through which systematic measurements of the Earth can be made over thousands of kilometers, decades of time, and evolution of measurement technology. This 2003-2004 ILRS annual report is comprised of individual contributions from ILRS components within the international geodetic community for the years 2003-2004. The report documents changes and progress of the ILRS and is also available on the ILRS Web site at http://ilrs.gsfc.nasa.gov/reports/ilrs_reports/ilrsar_2003.html

Tide Gauge Benchmark Monitoring Working Group Technical Report 2022

editorial reviewedApplications of the Global Navigation Satellite Systems (GNSS) to Earth Sciences are numerous. The International GNSS Service (IGS), a voluntary federation of government agencies, universities and research institutions, combines GNSS resources and expertise to provide the highest–quality GNSS data, products, and services in order to support high–precision applications for GNSS–related research and engineering activities. This IGS Technical Report 2022 includes contributions from the IGS Governing Board, the Central Bureau, Analysis Centers, Data Centers, station and network operators, working groups, pilot projects, and others highlighting status and important activities, changes and results that took place and were achieved during 2022

Adaptive, reliable, and accurate positioning model for location-based services

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis presents a new strategy in achieving highly reliable and accurate position solutions fulfilling the requirements of Location-Based Services (LBS) pedestrians’ applications. The new strategy is divided into two main parts. The first part integrates the available positioning technology within the surrounding LBS application context by introducing an adaptive LBS framework. The context can be described as a group of factors affecting the application behaviour; this includes environmental states, available resources and user preferences. The proposed adaptive framework consists of several stages, such as defining the contextual factors that have a direct effect on the positioning performance, identifying preliminary positioning performance requirements associated with different LBS application groups, and introducing an intelligent positioning services selection function. The second part of this work involves the design and development of a novel positioning model that is responsible for delivering highly reliable, accurate and precise position solutions to LBS users. This new model is based on the single frequency GPS Standard Positioning Service (SPS). Additionally, it is incorporated within the adaptive LBS framework while providing the position solutions, in which all identified contextual factors and application requirements are accounted. The positioning model operates over a client-server architecture including two main components, described as the Localisation Server (LS) and the Mobile Unit (MU). Hybrid functional approaches were developed at both components consisting of several processing procedures allowing the positioning model to operate in two position determination modes. Stand-alone mode is used if enough navigation information was available at the MU using its local positioning device (GPS/EGNOS receiver). Otherwise, server-based mode is utilised, in which the LS intervenes and starts providing the required position solutions. At the LS, multiple sources of GPS augmentation services were received using the Internet as the sole augmentation data transportation medium. The augmentation data was then processed and integrated for the purpose of guaranteeing the availability of valid and reliable information required for the provision of accurate and precise position solutions. Two main advanced position computation methods were developed at the LS, described as coordinate domain and raw domain. The positioning model was experimentally evaluated. According to the reported results, the LS through the developed position computation methods, was able to provide position samples with an accuracy of less than 2 meters, with high precision at 95% confidence level; this was achieved in urban, rural, and open space (clear satellite view) navigation environments. Additionally, the integrity of the position solutions was guaranteed in such environments during more than 90% of the navigation time, taking into consideration the identified integrity thresholds (Horizontal Alert Limits (HAL)=11 m). This positioning performance has outperformed the existing GPS/EGNOS service which was implemented at the MU in all scenarios and environments. In addition, utilising a simulation evaluation facility the developed positioning model performance was quantified with reference to a hybrid positioning service that will be offered by future Galileo Open Service (OS) along with GPS/EGNOS. Using the statistical t-test, it was concluded that there is no significant difference in terms of the position samples’ accuracy achieved from the developed positioning model and the hybrid system at a particular navigation environment described as rural area. The p-value was 0.08 and the level of significance used was 0.05. However, a significant difference in terms of the service integrity for the advantage of the hybrid system was experienced in all remaining scenarios and environments more especially the urban areas due to surrounding obstacles and conditions

Automotive applications of high precision GNSS

This thesis aims to show that Global Navigation Satellite Systems (GNSS) positioning can play a significant role in the positioning systems of future automotive applications. This is through the adoption of state-of-the-art GNSS positioning technology and techniques, and the exploitation of the rapidly developing vehicle-to-vehicle concept. The merging together of these two developments creates greater performance than can be achieved separately. The original contribution of this thesis comes from this combination: Through the introduction of the Pseudo-VRS concept. Pseudo-VRS uses the princples of Network Real Time Kinematic (N-RTK) positioning to share GNSS information between vehicles, which enables absolute vehicle positioning. Pseudo-VRS is shown to improve the performance of high precision GNSS positioning for road vehicles, through the increased availability of GNSS correction messages and the rapid resolution of the N-RTK fixed solution. Positioning systems in the automotive sector are dominated by satellite-based solutions provided by GNSS. This has been the case since May 2001, when the United States Department of Defense switched off Selective Availability, enabling significantly improved positioning performance for civilian users. The average person most frequently encounters GNSS when using electronic personal navigation devices. The Sat Nav or GPS Navigator is ubiquitous in modern societies, where versions can be found on nomadic devices such as smartphones and dedicated personal navigation devices, or built in to the dashboards of vehicles. Such devices have been hugely successful due to their intrinsic ability to provide position information anywhere in the world with an accuracy of approximately 10 metres, which has proved ideal for general navigation applications. There are a few well known limitations of GNSS positioning, including anecdotal evidence of incorrect navigation advice for personal navigation devices, but these are minor compared to the overall positioning performance. Through steady development of GNSS positioning devices, including the integration of other low cost sensors (for instance, wheel speed or odometer sensors in vehicles), and the development of robust map matching algorithms, the performance of these devices for navigation applications is truly incredible. However, when tested for advanced automotive applications, the performance of GNSS positioning devices is found to be inadequate. In particular, in the most advanced fields of research such as autonomous vehicle technology, GNSS positioning devices are relegated to a secondary role, or often not used at all. They are replaced by terrestrial sensors that provide greater situational awareness, such as radar and lidar. This is due to the high performance demand of such applications, including high positioning accuracy (sub-decimetre), high availability and continuity of solutions (100%), and high integrity of the position information. Low-cost GNSS receivers generally do not meet such requirements. This could be considered an enormous oversight, as modern GNSS positioning technology and techniques have significantly improved satellite-based positioning performance. Other non-GNSS techniques also have their limitations that GNSS devices can minimise or eliminate. For instance, systems that rely on situational awareness require accurate digital maps of their surroundings as a reference. GNSS positioning can help to gather this data, provide an input, and act as a fail-safe in the event of digital map errors. It is apparent that in order to deliver advanced automotive applications - such as semi- or fully-autonomous vehicles - there must be an element of absolute positioning capability. Positioning systems will work alongside situational awareness systems to enable the autonomous vehicles to navigate through the real world. A strong candidate for the positioning system is GNSS positioning. This thesis builds on work already started by researchers at the University of Nottingham, to show that N-RTK positioning is one such technique. N-RTK can provide sub-decimetre accuracy absolute positioning solutions, with high availability, continuity, and integrity. A key component of N-RTK is the availability of real-time GNSS correction data. This is typically delivered to the GNSS receiver via mobile internet (for a roving receiver). This can be a significant limitation, as it relies on the performance of the mobile communications network, which can suffer from performance degradation during dynamic operation. Mobile communications systems are expected to improve significantly over the next few years, as consumers demand faster download speeds and wider availability. Mobile communications coverage already covers a high percentage of the population, but this does not translate into a high percentage of a country's geography. Pockets of poor coverage, often referred to as notspots, are widespread. Many of these notspots include the transportation infrastructure. The vehicle-to-vehicle concept has made significant forward steps in the last few years. Traditionally promoted as a key component of future automotive safety applications, it is now driven primarily by increased demand for in-vehicle infotainment. The concept, which shares similarities with the Internet of Things and Mobile Ad-hoc Networks, relies on communication between road vehicles and other road agents (such as pedestrians and road infrastructure). N-RTK positioning can take advantage of this communication link to minimise its own communications-related limitations. Sharing GNSS information between local GNSS receivers enables better performance of GNSS positioning, based on the principles of differential GNSS and N-RTK positioning techniques. This advanced concept is introduced and tested in this thesis. The Pseudo VRS concept follows the protocols and format of sharing GNSS data used in N-RTK positioning. The technique utilises the latest GNSS receiver design, including multiple frequency measurements and high quality antennas

IGS Technical Report 2013

Applications of the Global Navigation Satellite Systems (GNSS) to Earth Sciences are numerous. The International GNSS Service (IGS), a federation of government agencies, universities and research institutions, plays an increasingly critical role in support of GNSS–related research and engineering activities. This Technical Report 2013 includes contributions from the IGS Governing Board, the Central Bureau, Analysis Centers, Data Centers, station and network operators, and others highlighting status and important activities, changes and results that took place and were achieved during 2013