Performance Analysis of Ultra Wideband Multiple Access Time Hopping – Pulse Shape Modulation in Presence of Timing Jitter

In short-range networks such as wireless personal area networks (WPAN), multiple user wireless connectivity for surveillance would require a wireless technology that supports multiple streams of high-speed data and consumes very little power. Ultra wideband (UWB) technology enables wireless connectivity across multiple devices (users) addressing the need for high-speed WPAN. Apart from having a distinct advantage of higher data rate over Bluetooth v4.0 (24 Mbps), the UWB technology is also found to be tolerant to frequency-selective multipath fading. In this paper authors discuss a time-hopping pulse shape modulation UWB signalling scheme for ad-hoc high bit rate wireless connectivity for defence applications. Authors analyse multiple access interference for both Gaussian channel and frequency selective multipath fading channel to compare the effects of timing jitter on two types of pulse shapes, namely modified Hermite pulse (MHP) and prolate spheroidal wave functions (PSWF). Authors make a comparative analysis of the system performance with respect to PSWF and MHP to ascertain robustness to timing jitter. In the process, authors introduced a new metric of decision factor in timing jitter analysis.Defence Science Journal, Vol. 64, No. 5, September 2014, pp.464-470, DOI:http://dx.doi.org/10.14429/dsj.64.578

Spektralno-efikasna zelena bežična komunikacija pomoću kognitivnog UWB signalnog modela

This paper focuses on spectral lines suppression for non-coherent impulse-radio ultra-wideband (IR-UWB) signals in the presence of pulse attenuation and timing jitter. Particular attention is devoted to severely unbalanced (i.e. non-uniform distributed) data sources where a unified spectral analysis is considered for both uncorrelated and correlated M-ary biorthogonal data-stream scenarios. Indeed, the specific novelty insights of this paper are as follows: i) Proposal of a new spectral-efficient signal model as a modified version of transmitted-reference (TR) approach, where each transmitted symbol is represented by a preamble Data-based Statistical Reference (DSR) followed by a set of transmitted data pulses and within this context, the preamble signal is designed to eliminate spectral lines via an adaptive monitoring of data-stream statistics as the optimal spectral policy; ii) Performance analysis in order to derive optimal signal parameters; iii) Evaluation of the system capabilities over different predefined operational modes.Ovaj rad se fokusira na prigušenje spektralnih linija kod ne-koherentnih radio-impulsnih ultra-širokopojasnih (IR-UWB) signala prilikom slabljenja pulsa i vremenskog podrhtavanja. Posebna pažnja je pridana značajno neuravnoteženim (npr. ne-unifornmno distribuiranim) izvorima podataka gdje je jedinstvena spektralna analiza razmatrana za nekorelirane i korelirane M-arne biortogonalne scenarije prijenosa podataka. Novine predstavljene u ovom radu su: i) Novi spektralno-efikasni signalni model koji je modificirana verzija pristupa prijenosom-reference (TR), gdje se svaki preneseni simbol prikazuje pomoću preambule definirane statistikom reference podataka (DSR) koju slijedi skup prenesenih podatkovnih pulseva, te je u tom kontekstu preambula signala dizajnirana kako bi se eliminirale spektralne linije pomoću optimalnog spektralnog kriterija definiranog adaptivnim praćenjem statistike poslanih podataka; ii) Analiza performansi kako bi se dobili optimalni parametri signala i iii) Evaluacija sposobnosti sustava prilikom rada u različitim predefiniranim stanjima

Impulse Radio Systems with Multiple Types of Ultra-Wideband Pulses

Spectral properties and performance of multi-pulse impulse radio ultra-wideband systems with pulse-based polarity randomization are analyzed. Instead of a single type of pulse transmitted in each frame, multiple types of pulses are considered, which is shown to reduce the effects of multiple-access interference. First, the spectral properties of a multi-pulse impulse radio system is investigated. It is shown that the power spectral density is the average of spectral contents of different pulse shapes. Then, approximate closed-form expressions for bit error probability of a multi-pulse impulse radio system are derived for RAKE receivers in asynchronous multiuser environments. The theoretical and simulation results indicate that impulse radio systems that are more robust against multiple-access interference than a "classical" impulse radio system can be designed with multiple types of ultra-wideband pulses.Comment: To be presented at the 2005 Conference on Information Sciences and System

Ultra Wideband Impulse Radio Systems with Multiple Pulse Types

In an ultra wideband (UWB) impulse radio (IR) system, a number of pulses, each transmitted in an interval called a "frame", is employed to represent one information symbol. Conventionally, a single type of UWB pulse is used in all frames of all users. In this paper, IR systems with multiple types of UWB pulses are considered, where different types of pulses can be used in different frames by different users. Both stored-reference (SR) and transmitted-reference (TR) systems are considered. First, the spectral properties of a multi-pulse IR system with polarity randomization is investigated. It is shown that the average power spectral density is the average of the spectral contents of different pulse shapes. Then, approximate closed-form expressions for the bit error probability of a multi-pulse SR-IR system are derived for RAKE receivers in asynchronous multiuser environments. The effects of both inter-frame interference (IFI) and multiple-access interference (MAI) are analyzed. The theoretical and simulation results indicate that SR-IR systems that are more robust against IFI and MAI than a "conventional" SR-IR system can be designed with multiple types of ultra-wideband pulses. Finally, extensions to multi-pulse TR-IR systems are briefly described.Comment: To appear in the IEEE Journal on Selected Areas in Communications - Special Issue on Ultrawideband Wireless Communications: Theory and Application

Ultra-wideband systems exploiting orthonormal waveforms

textElectrical and Computer Engineerin

Radio over fibre distribution systems for ultra-wide band and millimetre wave applications

Short range wireless technology such as ultra-wideband (UWB) and 60 GHz millimetre wave (mm-wave) play a key role for wireless connectivity in indoor home, office environment or large enclosed public areas. UWB has been allocated at the frequency band 3.1-10.6 GHz with an emission power below -41.3 dBm. Mm-wave signals around 60 GHz have also attracted much attention to support high-speed data for short range wireless applications. The wide bandwidth and high allowable transmit power at 60 GHz enable multi-Gbps wireless transmission over typical indoor distances. Radio-over-fibre (RoF) systems are used to extend the propagation distance of both UWB and mm-wave signals over hundred of meters inside a building. UWB or mm-wave signals over fibre can be generated first at the central office before being distributed to the remote access points through optical fibre. In this work, we investigate two new techniques to generate and distribute UWB signals. These techniques are based on generating Gaussian pulse position modulation (PPM) using a gain switched laser (GSL). The simulation and experimental results have been carried out to show the suitability of employing gain switching in UWB over fibre systems (UWBoF) to develop a reliable, simple, and low cost technique for distributing UWB pulses. The second part of this work proposes two configurations for optical mm-wave generation and transmission of 3 Gbps downstream data based on GSL. We investigate the distribution of these two methods over fibre with wireless link, and demonstrate the system simplicity and cost efficiency for mm-wave over fibre systems. Both configurations are simulated to verify our obtained results and show system performance at higher bit rates. In the third part, we generate phase modulated mm-waves by using an external injection of a modulated light source into GSL. The performance of this system is experimentally investigated and simulated for different fiber links

Implementation Aspects of a Transmitted-Reference UWB Receiver

In this paper, we discuss the design issues of an ultra wide band (UWB) receiver targeting a single-chip CMOS implementation for low data-rate applications like ad hoc wireless sensor networks. A non-coherent transmitted reference (TR) receiver is chosen because of its small complexity compared to other architectures. After a brief recapitulation of the UWB fundamentals and a short discussion on the major differences between coherent and non-coherent receivers, we discuss issues, challenges and possible design solutions. Several simulation results obtained by means of a behavioral model are presented, together with an analysis of the trade-off between performance and complexity in an integrated circuit implementation

Hardware Development of an Ultra-Wideband System for High Precision Localization Applications

A precise localization system in an indoor environment has been developed. The developed system is based on transmitting and receiving picosecond pulses and carrying out a complete narrow-pulse, signal detection and processing scheme in the time domain. The challenges in developing such a system include: generating ultra wideband (UWB) pulses, pulse dispersion due to antennas, modeling of complex propagation channels with severe multipath effects, need for extremely high sampling rates for digital processing, synchronization between the tag and receivers’ clocks, clock jitter, local oscillator (LO) phase noise, frequency offset between tag and receivers’ LOs, and antenna phase center variation. For such a high precision system with mm or even sub-mm accuracy, all these effects should be accounted for and minimized. In this work, we have successfully addressed many of the above challenges and developed a stand-alone system for positioning both static and dynamic targets with approximately 2 mm and 6 mm of 3-D accuracy, respectively. The results have exceeded the state of the art for any commercially available UWB positioning system and are considered a great milestone in developing such technology. My contributions include the development of a picosecond pulse generator, an extremely wideband omni-directional antenna, a highly directive UWB receiving antenna with low phase center variation, an extremely high data rate sampler, and establishment of a non-synchronized UWB system architecture. The developed low cost sampler, for example, can be easily utilized to sample narrow pulses with up to 1000 GS/s while the developed antennas can cover over 6 GHz bandwidth with minimal pulse distortion. The stand-alone prototype system is based on tracking a target using 4-6 base stations and utilizing a triangulation scheme to find its location in space. Advanced signal processing algorithms based on first peak and leading edge detection have been developed and extensively evaluated to achieve high accuracy 3-D localization. 1D, 2D and 3D experiments have been carried out and validated using an optical reference system which provides better than 0.3 mm 3-D accuracy. Such a high accuracy wireless localization system should have a great impact on the operating room of the future