Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering

In this study, acoustic emission (AE) technique is used to investigate different time-to-failure mechanisms of delamination in glass/epoxy composite laminates. Woven and unidirectional layups were subjected to the double cantilever beam, end notch flexure, and mixed-mode bending tests and the generated AE signals were captured. Discrimination of the AE events, caused by different types of the damage mechanisms, was performed using wavelet packet transform (WPT) and fuzzy clustering method (FCM) associated with a principal component analysis (PCA). The FCM and WPT analyses identified three dominant damage mechanisms. Furthermore, different interface layups and different GII/GT modal ratio values (ratio of mode II strain energy release rate per total strain energy release rate) indicated different time-to-failure mechanisms incidence. Additionally, the damaged mechanisms were observed using scanning electron microscopic (SEM) analysis. The results showed that the dominant damage mechanisms in all the specimens are matrix cracking and fiber–matrix debonding. Besides, some fiber breakage appeared during the tests, and the percentage of this damage mechanism in the unidirectional specimens and mode I condition was higher than those in the woven specimens and mode II. SEM observations were also in good agreement with the obtained results. It was found that the presented methods can be utilized to improve the characterization and discrimination of damage mechanisms in the actual occurring modes of delamination in composite structures

Estimation of EMG-Based force using a neural-network-based approach

© 2013 IEEE. The dynamics of human arms has a high impact on the humans' activities in daily life, especially when a human operates a tool such as interactions with a robot with the need for high dexterity. The dexterity of human arms depends largely on motor functionality of muscle. In this sense, the dynamics of human arms should be well analyzed. In this paper, in order to analyse the characteristic of human arms, a neural-network-based algorithm is proposed for exploring the potential model between electromyography (EMG) signal and human arm's force. Based on the analysis of force for humans, the mean absolute value of the electromyographic signal is selected as the input for the potential model. In this paper, in order to accurately estimate the potential model, three domains fuzzy wavelet neural network (TDFWNN) algorithm without prior knowledge of the biomechanical model is utilized. The performance of the proposed algorithm has been demonstrated by the experimental results in comparison with the conventional radial basis function neural network (RBFNN) method. By comparison, the proposed TDFWNN algorithm provides an effective solution to evaluate the influence of human factors based on biological signals

A Hybrid Approach of Using Wavelets and Fuzzy Clustering for Classifying Multispectral Florescence In Situ Hybridization Images

Multicolor or multiplex fluorescence in situ hybridization (M-FISH) imaging is a recently developed molecular cytogenetic diagnosis technique for rapid visualization of genomic aberrations at the chromosomal level. By the simultaneous use of all 24 human chromosome painting probes, M-FISH imaging facilitates precise identification of complex chromosomal rearrangements that are responsible for cancers and genetic diseases. The current approaches, however, cannot have the precision sufficient for clinical use. The reliability of the technique depends primarily on the accurate pixel-wise classification, that is, assigning each pixel into one of the 24 classes of chromosomes based on its six-channel spectral representations. In the paper we introduce a novel approach to improve the accuracy of pixel-wise classification. The approach is based on the combination of fuzzy clustering and wavelet normalization. Two wavelet-based algorithms are used to reduce redundancies and to correct misalignments between multichannel FISH images. In comparison with conventional algorithms, the wavelet-based approaches offer more advantages such as the adaptive feature selection and accurate image registration. The algorithms have been tested on images from normal cells, showing the improvement in classification accuracy. The increased accuracy of pixel-wise classification will improve the reliability of the M-FISH imaging technique in identifying subtle and cryptic chromosomal abnormalities for cancer diagnosis and genetic disorder research

A framework for the comparative assessment of neuronal spike sorting algorithms towards more accurate off-line and on-line microelectrode arrays data analysis

Neuronal spike sorting algorithms are designed to retrieve neuronal network activity on a single-cell level from extracellular multiunit recordings with Microelectrode Arrays (MEAs). In typical analysis of MEA data, one spike sorting algorithm is applied indiscriminately to all electrode signals. However, this approach neglects the dependency of algorithms' performances on the neuronal signals properties at each channel, which require data-centric methods. Moreover, sorting is commonly performed off-line, which is time and memory consuming and prevents researchers from having an immediate glance at ongoing experiments. The aim of this work is to provide a versatile framework to support the evaluation and comparison of different spike classification algorithms suitable for both off-line and on-line analysis. We incorporated different spike sorting "building blocks" into a Matlab-based software, including 4 feature extraction methods, 3 feature clustering methods, and 1 template matching classifier. The framework was validated by applying different algorithms on simulated and real signals from neuronal cultures coupled to MEAs. Moreover, the system has been proven effective in running on-line analysis on a standard desktop computer, after the selection of the most suitable sorting methods. This work provides a useful and versatile instrument for a supported comparison of different options for spike sorting towards more accurate off-line and on-line MEA data analysis

Numerical Solution of Some Uncertain Diffusion Problems

Diffusion is an important phenomenon in various fields of science and engineering. These problems depend on various parameters viz. diffusion coefficients, geometry, material properties, initial and boundary conditions etc. Governing differential equations with deterministic parameters have been well studied. But, in real practice these parameters may not be crisp (exact) rather it involves vague, imprecise and incomplete information about the system variables and parameters. Uncertainties occur due to error in measurements, observations, experiments, applying different operating conditions or it may be due to maintenance induced errors, etc. As such, it is an important concern to model these type of uncertainties. Traditionally uncertain problems are modelled through probabilistic approach. But probabilistic methods may not able to deliver reliable results at the required precision without sufficient data. In this context, interval and fuzzy theory may be used to manage such uncertainties. Accordingly, the system parameters and variables are represented here as interval and fuzzy numbers. Generally, we get interval or fuzzy system of equations for uncertain steady state problems with interval or fuzzy parameters whereas interval or fuzzy eigenvalue problems may be obtained for unsteady state. This thesis redefined interval or fuzzy arithmetic in order to handle the uncertain problems. The proposed arithmetic has been used to solve fuzzy and interval system of equations and eigenvalue problems. Various numerical methods viz. Finite Element Method (FEM), Wavelet Method (WM), Euler Maruyama and Milstein Methods are studied by introducing interval or fuzzy theory. The proposed arithmetic has been combined with FEM and WM to develop Interval or Fuzzy Finite Element Method (I/FFEM) and Interval or Fuzzy Wavelet Method (I/FWM). Further, it may be pointed out that sometimes systems may possess uncertainties due to randomness and fuzziness of the parameters. As such, here we have hybridized the concept of fuzziness as well as stochasticity to develop numerical fuzzy stochastic methods viz. interval or Fuzzy Euler Maruyama and Interval/Fuzzy Milstein. These methods are also been used to solve various diffusion problems. Numerical examples and different application problems are solved to demonstrate the efficiency and capabilities of the developed methods. In this respect, imprecisely defined diffusion problems such as heat conduction and conjugate heat transfer in rod, homogeneous and non-homogeneous fin and plate, along with one group, multi group and point kinetic neutron diffusion with interval or fuzzy uncertainties have been investigated. The convergence of the field variables have been investigated with respect to the number of element discretization of the domain in case of I/FEM. Accordingly, convergence of the proposed interval or fuzzy FEM has been studied for unsteady heat conduction in a cylindrical rod. For conjugate heat transfer problems, the convergence of uncertain temperature distributions with respect to the number of element discretizations has also been studied. Further, various combinations of uncertain parameters are considered and the sensitivity of these parameters has been reported. Next, one group and two group problems have been solved and the sensitivity of the uncertain parameters in the context of fast and thermal neutrons are presented. The hybrid fuzzy stochastic methods have also been used to investigate uncertain stochastic point kinetic neutron diffusion problem. Uncertain variation of neutron populations are analysed by considering two random samples. Developed interval or fuzzy WM has also been used to solve uncertain differential equation. Finally obtained results for the said problems are compared in special cases for the validation of proposed methods

Acoustic data optimisation for seabed mapping with visual and computational data mining

Oceans cover 70% of Earth’s surface but little is known about their waters. While the echosounders, often used for exploration of our oceans, have developed at a tremendous rate since the WWII, the methods used to analyse and interpret the data still remain the same. These methods are inefficient, time consuming, and often costly in dealing with the large data that modern echosounders produce. This PhD project will examine the complexity of the de facto seabed mapping technique by exploring and analysing acoustic data with a combination of data mining and visual analytic methods. First we test the redundancy issues in multibeam echosounder (MBES) data by using the component plane visualisation of a Self Organising Map (SOM). A total of 16 visual groups were identified among the 132 statistical data descriptors. The optimised MBES dataset had 35 attributes from 16 visual groups and represented a 73% reduction in data dimensionality. A combined Principal Component Analysis (PCA) + k-means was used to cluster both the datasets. The cluster results were visually compared as well as internally validated using four different internal validation methods. Next we tested two novel approaches in singlebeam echosounder (SBES) data processing and clustering – using visual exploration for outlier detection and direct clustering of time series echo returns. Visual exploration identified further outliers the automatic procedure was not able to find. The SBES data were then clustered directly. The internal validation indices suggested the optimal number of clusters to be three. This is consistent with the assumption that the SBES time series represented the subsurface classes of the seabed. Next the SBES data were joined with the corresponding MBES data based on identification of the closest locations between MBES and SBES. Two algorithms, PCA + k-means and fuzzy c-means were tested and results visualised. From visual comparison, the cluster boundary appeared to have better definitions when compared to the clustered MBES data only. The results seem to indicate that adding SBES did in fact improve the boundary definitions. Next the cluster results from the analysis chapters were validated against ground truth data using a confusion matrix and kappa coefficients. For MBES, the classes derived from optimised data yielded better accuracy compared to that of the original data. For SBES, direct clustering was able to provide a relatively reliable overview of the underlying classes in survey area. The combined MBES + SBES data provided by far the best accuracy for mapping with almost a 10% increase in overall accuracy compared to that of the original MBES data. The results proved to be promising in optimising the acoustic data and improving the quality of seabed mapping. Furthermore, these approaches have the potential of significant time and cost saving in the seabed mapping process. Finally some future directions are recommended for the findings of this research project with the consideration that this could contribute to further development of seabed mapping problems at mapping agencies worldwide

Uber-Claws : unsupervised pattern classification for multi-unit extracellular neuronal burst extraction

To further an understanding of how a neuronal population generates patterns of rhythmic activity, the temporal dynamics of the group of neurons must be formalized. Essential to this pursuit, is the ability to reliably detect and separate the classes of single-unit neuronal activity from multi-unit extracellular signals recorded in a single channel. This study proposes a unified approach to automatically detect and classify single-unit bursts, and to observe the precise onset and offset of burst activity. Existing approaches to the problem fundamentally depend on the statistics of spike waveform variability, both extrinsic and intrinsic to the neuron. In contrast, the proposed approach depends on statistics that characterize the burst variability. An unsupervised learning procedure is implemented using hierarchical clustering to derive a complete and natural description of the variability in terms of clusters of bursts that possess strong internal similarities. Redundant solution vectors are used to parameterize each cluster, and a fuzzy classification approach assigns each burst to a class. Accuracy of the technique is demonstrated on in vivo and in vitro recordings of the triphasic pyloric rhythm in stomatogastric ganglion of crab Cancer borealis. The results, evaluated against a widely used manual classification approach, show that the technique performs detection and classification with comparable accuracy and quantifiable certainty, and is robust to background activity and noise

X-Ray Image Processing and Visualization for Remote Assistance of Airport Luggage Screeners

X-ray technology is widely used for airport luggage inspection nowadays. However, the ever-increasing sophistication of threat-concealment measures and types of threats, together with the natural complexity, inherent to the content of each individual luggage make x-ray raw images obtained directly from inspection systems unsuitable to clearly show various luggage and threat items, particularly low-density objects, which poses a great challenge for airport screeners. This thesis presents efforts spent in improving the rate of threat detection using image processing and visualization technologies. The principles of x-ray imaging for airport luggage inspection and the characteristics of single-energy and dual-energy x-ray data are first introduced. The image processing and visualization algorithms, selected and proposed for improving single energy and dual energy x-ray images, are then presented in four categories: (1) gray-level enhancement, (2) image segmentation, (3) pseudo coloring, and (4) image fusion. The major contributions of this research include identification of optimum combinations of common segmentation and enhancement methods, HSI based color-coding approaches and dual-energy image fusion algorithms —spatial information-based and wavelet-based image fusions. Experimental results generated with these image processing and visualization algorithms are shown and compared. Objective image quality measures are also explored in an effort to reduce the overhead of human subjective assessments and to provide more reliable evaluation results. Two application software are developed − an x-ray image processing application (XIP) and a wireless tablet PC-based remote supervision system (RSS). In XIP, we implemented in a user-friendly GUI the preceding image processing and visualization algorithms. In RSS, we ported available image processing and visualization methods to a wireless mobile supervisory station for screener assistance and supervision. Quantitative and on-site qualitative evaluations for various processed and fused x-ray luggage images demonstrate that using the proposed algorithms of image processing and visualization constitutes an effective and feasible means for improving airport luggage inspection