A MATLAB based simulation program for indoor visible light communication system

We report a simulation program for indoor visible light communication environment based on MATLAB and Simulink. The program considers the positions of the transmitters and the reflections at each wall. For visible light communication environment, the illumination light-emitting diode is used not only as a lighting device, but also as a communication device. Using the simulation program, the distributions of illuminance and root-mean-square delay spread are analyzed at bottom surface

Simulation and Analysis of Indoor Visible Light Propagation Characteristics Based on the Method of SBR/Image

The indoor visible light propagation characteristics are simulated and analyzed using the method of SBR/Image (shooting and bounding ray tracing/Image). A good agreement is achieved between the results simulated and the results given in published literature. So the correctness of the method has been validated. Some propagation parameters are obtained in the simulation, such as the indoor received power distribution, statistical distribution of phase angle of received power, RMS (root mean square) delay spread, direction of arrival, and Doppler shift. The foundation for the wireless network coverage of indoor visible light communication system is provided by the analysis of the above results

Visible Light Communications towards 5G

5G networks have to offer extremely high capacity for novel streaming applications. One of the most promising approaches is to embed large numbers of co-operating small cells into the macro-cell coverage area. Alternatively, optical wireless based technologies can be adopted as an alternative physical layer offering higher data rates. Visible light communications (VLC) is an emerging technology for future high capacity communication links (it has been accepted to 5GPP) in the visible range of the electromagnetic spectrum (~370–780 nm) utilizing light-emitting diodes (LEDs) simultaneously provide data transmission and room illumination. A major challenge in VLC is the LED modulation bandwidths, which are limited to a few MHz. However, myriad gigabit speed transmission links have already been demonstrated. Non line-of-sight (NLOS) optical wireless is resistant to blocking by people and obstacles and is capable of adapting its’ throughput according to the current channel state information. Concurrently, organic polymer LEDs (PLEDs) have become the focus of enormous attention for solid-state lighting applications due to their advantages over conventional white LEDs such as ultra-low costs, low heating temperature, mechanical flexibility and large photoactive areas when produced with wet processing methods. This paper discusses development of such VLC links with a view to implementing ubiquitous broadcasting networks featuring advanced modulation formats such as orthogonal frequency division multiplexing (OFDM) or carrier-less amplitude and phase modulation (CAP) in conjunction with equalization techniques. Finally, this paper will also summarize the results of the European project ICT COST IC1101 OPTICWISE (Optical Wireless Communications - An Emerging Technology) dealing VLC and OLEDs towards 5G networks

A path loss model for link budget analysis of indoor visible light communications

In the context of beyond 5G indoor communication systems, visible light communications (VLC) has emerged as a viable supplement for existing radio frequency based systems and as an enabler for high data rate communications. However, the existing indoor VLC systems are limited by detrimental outages caused by fluctuations in the VLC channel gain because of user mobility. In this study, we proposed a tractable path loss model for indoor VLC that reflects the effect of room size and coating material of surfaces. We performed an extensive advanced ray tracing simulation to obtain the channel impulse responses within a room and presented a path loss model as a function of distance, room size, and coating material through curve fitting. In addition, path loss parameters such as the path loss exponent and the standard deviation of the shadowing component were determined. The simulation results indicate that path loss is a linear function of distance, path loss exponent is a function of room size and coating material, and shadowing follows a log normal distribution.Publisher's Versio

Effective Visible Light Communication System for Underground Mining Industry

Adequate lightening and efficient communication technology have prime importance for safe underground mining communication system operations. Existing conventional light and communication systems used in underground mines are not very efficient solutions due to heavy power and maintenance requirements. Also, efficient communication technology is required for instantaneous reporting of any potential disaster event under hazardous underground environment. In this paper, we propose light fidelity (Li-Fi) as an efficient way of incident reporting as well as source of illumination for mines. Visible light communication (VLC) system is being used in mines operations, to support communication-blind areas. It exhibits superior performance over traditional radio frequency (RF) communication systems, in terms of low energy consumption, higher data rates achieved, and wide frequency band (430 − 790) T Hz. In this paper, we present VLC system for safe and reliable mining operations and analyze and discuss corresponding channel impulse response (CIR). We consider effect of shadowing and dust on our optical channel model. We compare the performance of our system with available methods in terms of bit error rate (BER), CIR, and prove the superiority of our proposed system

Introduction to indoor networking concepts and challenges in LiFi

LiFi is networked, bidirectional wireless communication with light. It is used to connect fixed and mobile devices at very high data rates by harnessing the visible light and infrared spectrum. Combined, these spectral resources are 2600 times larger than the entire radio frequency (RF) spectrum. This paper provides the motivation behind why LiFi is a very timely technology, especially for 6th generation (6G) cellular communications. It discusses and reviews essential networking technologies, such as interference mitigation and hybrid LiFi/Wi-Fi networking topologies. We also consider the seamless integration of LiFi into existing wireless networks to form heterogeneous networks across the optical and RF domains and discuss implications and solutions in terms of load balancing. Finally, we provide the results of a real-world hybrid LiFi/Wi-Fi network deployment in a software defined networking testbed. In addition, results from a LiFi deployment in a school classroom are provided, which show that Wi-Fi network performance can be improved significantly by offloading traffic to the LiFi

Noise Analysis of Trans-impedance Amplifier (TIA) in Variety Op Amp for use in Visible Light Communication (VLC) System

VLC is a complex system with lots of challenges in its implementation. One of its problems is noise that originated from internal and external sources (sunlight, artificial light, etc). Internal noise is originated from active components of analog front-end (AFE) circuit, which will be discussed in this paper, especially on the trans-impedance amplifier (TIA) domain. The noise characteristics of AFE circuit in VLC system has been analyzed using the variety of available commercial Op Amp and different types of the photodiode (Si, Si-PIN, Si APD). The approach of this research is based on analytical calculus and simulation using MATLAB®. The results of this research show that the main factor that affecting the noise is en, the feedback resistor (Rf), and junction capacitor in the photodiode (Cj). Besides that, the design concept of multi channel TIA (8 channel) using IC Op Amp, with consideration of pin number of each Op Amp, supply needs, the initial value of Rf, converter to 8-DIP and feedback capacitor (Cf) channel, also discussed in this paper