Energy Efficient Engine (E3) controls and accessories detail design report

An Energy Efficient Engine program has been established by NASA to develop technology for improving the energy efficiency of future commercial transport aircraft engines. As part of this program, a new turbofan engine was designed. This report describes the fuel and control system for this engine. The system design is based on many of the proven concepts and component designs used on the General Electric CF6 family of engines. One significant difference is the incorporation of digital electronic computation in place of the hydromechanical computation currently used

The STAR MAPS-based PiXeL detector

The PiXeL detector (PXL) for the Heavy Flavor Tracker (HFT) of the STAR experiment at RHIC is the first application of the state-of-the-art thin Monolithic Active Pixel Sensors (MAPS) technology in a collider environment. Custom built pixel sensors, their readout electronics and the detector mechanical structure are described in detail. Selected detector design aspects and production steps are presented. The detector operations during the three years of data taking (2014-2016) and the overall performance exceeding the design specifications are discussed in the conclusive sections of this paper

Impersonal efficiency and the dangers of a fully automated securities exchange

This report identifies impersonal efficiency as a driver of market automation during the past four decades, and speculates about the future problems it might pose. The ideology of impersonal efficiency is rooted in a mistrust of financial intermediaries such as floor brokers and specialists. Impersonal efficiency has guided the development of market automation towards transparency and impersonality, at the expense of human trading floors. The result has been an erosion of the informal norms and human judgment that characterize less anonymous markets. We call impersonal efficiency an ideology because we do not think that impersonal markets are always superior to markets built on social ties. This report traces the historical origins of this ideology, considers the problems it has already created in the recent Flash Crash of 2010, and asks what potential risks it might pose in the future

A New Single-Phase Single-Stage AC-DC Stacked Flyback Converter With Active Clamp ZVS

Single-stage AC-DC converters integrate an AC-DC front-end converter with a DC-DC back-end converter. Compared with conventional two-stage AC-DC converters, single-stage AC-DC converters use less components and only one controller, which is used to regulate the output voltage. As a result, the cost, size and complexity of AC-DC converters can be reduced, but single-stage converters do not perform as well as two-stage converters, and most have drawbacks that are related to the fact that the DC bus voltage is not controlled an can become excessive. A new single-phase single-stage AC-DC converter that uses stacked flyback converters is proposed in this thesis. The proposed converter consists of two low power flyback converters stacked on top of each other and an active clamp that helps the main switches operate with ZVS. The stacked structure helps reduce the voltage stresses typical fund in many single-stage converters. In the thesis, the operation of the converter is explained, the steady-state characteristics of the converter are determined and its design is discussed. The feasibility of the new converter is confirmed with experimental results obtained from a 100VAC~220VAC worldwide input, 48V output, 100kHz switching frequency and 200 W output power prototype converter

Design Techniques of Highly Integrated Hybrid-Switched-Capacitor-Resonant Power Converters for LED Lighting Applications

The Light-emitting diodes (LEDs) are rapidly emerging as the dominant light source given their high luminous efficacy, long lift span, and thanks to the newly enacted efficiency standards in favor of the more environmentally-friendly LED technology. The LED lighting market is expected to reach USD 105.66 billion by 2025. As such, the lighting industry requires LED drivers, which essentially are power converters, with high efficiency, wide input/output range, low cost, small form factor, and great performance in power factor, and luminance flicker. These requirements raise new challenges beyond the traditional power converter topologies. On the other hand, the development and improvement of new device technologies such as printed thin-film capacitors and integrated high voltage/power devices opens up many new opportunities for mitigating such challenges using innovative circuit design techniques and solutions. Almost all electric products needs certain power delivery, regulation or conversion circuits to meet the optimized operation conditions. Designing a high performance power converter is a real challenge given the market’s increasing requirements on energy efficiency, size, cost, form factor, EMI performance, human health impact, and so on. The design of a LED driver system covers from high voltage AC/DC and DC/DC power converters, to high frequency low voltage digital controllers, to power factor correction (PFC) and EMI filtering techniques, and to safety solutions such as galvanic isolation. In this thesis, we study design challenges and present corresponding solutions to realize highly integrated and high performance LED drivers combining switched-capacitor and resonant converters, applying re-configurable multi-level circuit topology, utilizing sigma delta modulation, and exploring capacitive galvanic isolation. A hybrid switched-capacitor-resonant (HSCR) LED driver based on a stackable switched-capacitor (SC) converter IC rated for 15 to 20 W applications. Bulky transformers have been replaced with a SC ladder to perform high-efficiency voltage step-down conversion; an L-C resonant output network provides almost lossless current regulation and demonstrates the potential of capacitive galvanic isolation. The integrated SC modules can be stacked in the voltage domain to handle a large range of input voltage ranges that largely exceed the voltage limitation of the medium-voltage-rated 120 V silicon technology. The LED driver demonstrates > 91% efficiency over a rectified input DC voltage range from 160 VDC to 180 VDC with two stacked ICs; using a stack of four ICs > 89.6% efficiency is demonstrated over an input range from 320 VDC to 360 VDC . The LED driver can dim its output power to around 10% of the rated power while maintaining >70% efficiency with a PWM controlled clock gating circuit. Next, the design of AC main rectifier and inverter front end with sigma delta modulation is described. The proposed circuits features a pair of sigma delta controlled multilevel converters. The first is a multilevel rectifier responsible for PFC and dimming. The second is a bidirectional multilevel inverter used to cancel AC power ripple from the DC bus. The system also contains an output stage that powers the LEDs with DC and provides for galvanic isolation. Its functional performance indicates that integrated multilevel converters are a viable topology for lighting and other similar applications

Development and performance of pulse-width-modulated static inverter and converter modules

Pulse-width-modulated inverter and converter modules are being developed for modular aerospace electrical power systems. The modules, rate 2.5 kilowatts per module and 10-minute - 150-percent overload, operate from 56 volts dc. The converter module provides two output voltages: a nominal link voltage of 200 volts dc when used with the inverter, and 150 volts dc to a load bus when used separately. The inverter module output is 400-hertz, sinusoidal, three-phase, 120/208 volts. Tests of breadboard models with standard parts and integrated circuits show rated power efficiencies of 71.4 and 85.1 percent and voltage regulation of 5 and 3.1 percent for inverter and converter modules, respectively. Sine-wave output distortion is 0.74 percent

Design and fabrication of a long-life Stirling cycle cooler for space application. Phase 3: Prototype model

A second-generation, Stirling-cycle cryocooler (cryogenic refrigerator) for space applications, with a cooling capacity of 5 watts at 65 K, was recently completed. The refrigerator, called the Prototype Model, was designed with a goal of 5 year life with no degradation in cooling performance. The free displacer and free piston of the refrigerator are driven directly by moving-magnet linear motors with the moving elements supported by active magnetic bearings. The use of clearance seals and the absence of outgassing material in the working volume of the refrigerator enable long-life operation with no deterioration in performance. Fiber-optic sensors detect the radial position of the shafts and provide a control signal for the magnetic bearings. The frequency, phase, stroke, and offset of the compressor and expander are controlled by signals from precision linear position sensors (LVDTs). The vibration generated by the compressor and expander is cancelled by an active counter balance which also uses a moving-magnet linear motor and magnetic bearings. The driving signal for the counter balance is derived from the compressor and expander position sensors which have wide bandwidth for suppression of harmonic vibrations. The efficiency of the three active members, which operate in a resonant mode, is enhanced by a magnetic spring in the expander and by gas springs in the compressor and counterbalance. The cooling was achieved with a total motor input power of 139 watts. The magnetic-bearing stiffness was significantly increased from the first-generation cooler to accommodate shuttle launch vibrations

A flicker-free electrolytic capacitor-less AC-DC LED driver

published_or_final_versio

Satellite-aided mobile communications limited operational test in the trucking industry

An experiment with NASA's ATS-6 satellite, that demonstrates the practicality of satellite-aided land mobile communications is described. Satellite communications equipment for the experiment was designed so that it would be no more expensive, when mass produced, than conventional two-way mobile radio equipment. It embodied the operational features and convenience of present day mobile radios. Vehicle antennas 75 cm tall and 2 cm in diameter provided good commercial quality signals to and from trucks and jeeps. Operational applicability and usage data were gathered by installing the radio equipment in five long-haul tractor-trailer trucks and two Air Force search and rescue jeeps. Channel occupancy rates are reported. Air Force personnel found the satellite radio system extremely valuable in their search and rescue mission during maneuvers and actual rescue operations. Propagation data is subjectively analyzed and over 4 hours of random data is categorized and graded as to signal quality on a second by second basis. Trends in different topographic regions are reported. An overall communications reliability of 93% was observed despite low satellite elevation angles ranging from 9 to 24 degrees

Analytic design of spaceborne axial injection cross-field amplifiers Final report

S band crossed-field amplifier suitable for satellite television relay system