30 research outputs found
Side information exploitation, quality control and low complexity implementation for distributed video coding
Distributed video coding (DVC) is a new video coding methodology that shifts the highly complex motion search components from the encoder to the decoder, such a video coder would have a great advantage in encoding speed and it is still able to achieve similar rate-distortion performance as the conventional coding solutions. Applications include wireless video sensor networks, mobile video cameras and wireless video surveillance, etc. Although many progresses have been made in DVC over the past ten years, there is still a gap in RD performance between conventional video coding solutions and DVC. The latest development of DVC is still far from standardization and practical use. The key problems remain in the areas such as accurate and efficient side information generation and refinement, quality control between Wyner-Ziv frames and key frames, correlation noise modelling and decoder complexity, etc.
Under this context, this thesis proposes solutions to improve the state-of-the-art side information refinement schemes, enable consistent quality control over decoded frames during coding process and implement highly efficient DVC codec.
This thesis investigates the impact of reference frames on side information generation and reveals that reference frames have the potential to be better side information than the extensively used interpolated frames. Based on this investigation, we also propose a motion range prediction (MRP) method to exploit reference frames and precisely guide the statistical motion learning process. Extensive simulation results show that choosing reference frames as SI performs competitively, and sometimes even better than interpolated frames. Furthermore, the proposed MRP method is shown to significantly reduce the decoding complexity without degrading any RD performance.
To minimize the block artifacts and achieve consistent improvement in both subjective and objective quality of side information, we propose a novel side information synthesis framework working on pixel granularity. We synthesize the SI at pixel level to minimize the block artifacts and adaptively change the correlation noise model according to the new SI. Furthermore, we have fully implemented a state-of-the-art DVC decoder with the proposed framework using serial and parallel processing technologies to identify bottlenecks and areas to further reduce the decoding complexity, which is another major challenge for future practical DVC system deployments. The performance is evaluated based on the latest transform domain DVC codec and compared with different standard codecs. Extensive experimental results show substantial and consistent rate-distortion gains over standard video codecs and significant speedup over serial implementation.
In order to bring the state-of-the-art DVC one step closer to practical use, we address the problem of distortion variation introduced by typical rate control algorithms, especially in a variable bit rate environment. Simulation results show that the proposed quality control algorithm is capable to meet user defined target distortion and maintain a rather small variation for sequence with slow motion and performs similar to fixed quantization for fast motion sequence at the cost of some RD performance.
Finally, we propose the first implementation of a distributed video encoder on a Texas Instruments TMS320DM6437 digital signal processor. The WZ encoder is
efficiently implemented, using rate adaptive low-density-parity-check accumulative (LDPCA) codes, exploiting the hardware features and optimization techniques to improve the overall performance. Implementation results show that the WZ encoder is able to encode at 134M instruction cycles per QCIF frame on a TMS320DM6437 DSP running at 700MHz. This results in encoder speed 29 times faster than non-optimized encoder implementation. We also implemented a highly efficient DVC decoder using both serial and parallel technology based on a PC-HPC (high performance cluster) architecture, where the encoder is running in a general purpose PC and the decoder is running in a multicore HPC. The experimental results show that the parallelized decoder can achieve about 10 times speedup under various bit-rates and GOP sizes compared to the serial implementation and significant RD gains with regards to the state-of-the-art DISCOVER codec
Towards practical distributed video coding
Multimedia is increasingly becoming a utility rather than mere entertainment. The range of video applications has increased, some of which are becoming indispensable in modem lifestyle. Video surveillance is one area that has attracted significant amount of focus and also benefited from considerable research effort for development. However, it is noted that there is still a notable technological gap between an ideal video surveillance platform and the available solutions, mainly in the form of the encoder and decoder complexity balance and the associated design costs. In this thesis, we tocus on an emerging technology, Distributed Video Coding (DVC), which is ideally suited for the video surveillance scenario, and fits many other potential applications too.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
REGION-BASED ADAPTIVE DISTRIBUTED VIDEO CODING CODEC
The recently developed Distributed Video Coding (DVC) is typically suitable for the
applications where the conventional video coding is not feasible because of its
inherent high-complexity encoding. Examples include video surveillance usmg
wireless/wired video sensor network and applications using mobile cameras etc. With
DVC, the complexity is shifted from the encoder to the decoder.
The practical application of DVC is referred to as Wyner-Ziv video coding (WZ)
where an estimate of the original frame called "side information" is generated using
motion compensation at the decoder. The compression is achieved by sending only
that extra information that is needed to correct this estimation. An error-correcting
code is used with the assumption that the estimate is a noisy version of the original
frame and the rate needed is certain amount of the parity bits. The side information is
assumed to have become available at the decoder through a virtual channel. Due to
the limitation of compensation method, the predicted frame, or the side information, is
expected to have varying degrees of success. These limitations stem from locationspecific
non-stationary estimation noise. In order to avoid these, the conventional
video coders, like MPEG, make use of frame partitioning to allocate optimum coder
for each partition and hence achieve better rate-distortion performance. The same,
however, has not been used in DVC as it increases the encoder complexity.
This work proposes partitioning the considered frame into many coding units
(region) where each unit is encoded differently. This partitioning is, however, done at
the decoder while generating the side-information and the region map is sent over to
encoder at very little rate penalty. The partitioning allows allocation of appropriate
DVC coding parameters (virtual channel, rate, and quantizer) to each region. The
resulting regions map is compressed by employing quadtree algorithm and
communicated to the encoder via the feedback channel. The rate control in DVC is
performed by channel coding techniques (turbo codes, LDPC, etc.). The performance
of the channel code depends heavily on the accuracy of virtual channel model that models estimation error for each region. In this work, a turbo code has been used and
an adaptive WZ DVC is designed both in transform domain and in pixel domain. The
transform domain WZ video coding (TDWZ) has distinct superior performance as
compared to the normal Pixel Domain Wyner-Ziv (PDWZ), since it exploits the
'
spatial redundancy during the encoding. The performance evaluations show that the
proposed system is superior to the existing distributed video coding solutions.
Although the, proposed system requires extra bits representing the "regions map" to be
transmitted, fuut still the rate gain is noticeable and it outperforms the state-of-the-art
frame based DVC by 0.6-1.9 dB.
The feedback channel (FC) has the role to adapt the bit rate to the changing
'
statistics between the side infonmation and the frame to be encoded. In the
unidirectional scenario, the encoder must perform the rate control. To correctly
estimate the rate, the encoder must calculate typical side information. However, the
rate cannot be exactly calculated at the encoder, instead it can only be estimated. This
work also prbposes a feedback-free region-based adaptive DVC solution in pixel
domain based on machine learning approach to estimate the side information.
Although the performance evaluations show rate-penalty but it is acceptable
considering the simplicity of the proposed algorithm.
vii
Improved Side Information Generation for Distributed Video Coding by Exploiting Spatial and Temporal Correlations
Distributed Video Coding (DVC) is a new paradigm in video coding, which is receiving a lot of interests nowadays. Side Information (SI) generation is a key function in the DVC decoder, and plays a key-role in determining the performance of the codec. This paper proposes an improved motion compensated frame interpolation for SI generation in DVC, which exploits both spatial and temporal correlations in the sequences. Partially decoded Wyner-Ziv (WZ) frames, based on initial SI by motion compensated temporal interpolation, are exploited to improve the performance of the whole SI generation. More specifically, an enhanced temporal frame interpolation is proposed, including motion vector refinement and smoothing, optimal compensation mode selection, and a new matching criterion for motion estimation. The improved SI technique is also applied to a new hybrid spatial and temporal error concealment scheme to conceal errors in WZ frames, where the error-concealed results from spatial concealment are used to improve the performance of temporal concealment. Simulation results show that the proposed scheme can achieve up to 1.0 dB improvement in rate distortion performance in WZ frames for video with high motion, when compared to state-of-the-art DVC. In addition, both the objective and perceptual quality of the corrupted sequences are significantly improved by the proposed hybrid error concealment scheme, outperforming both spatial and temporal concealments alone
Advanced distributed video coding techniques
EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Recommended from our members
Intelligent Side Information Generation in Distributed Video Coding
Distributed video coding (DVC) reverses the traditional coding paradigm of complex encoders allied with basic decoding to one where the computational cost is largely incurred by the decoder. This is attractive as the proven theoretical work of Wyner-Ziv (WZ) and Slepian-Wolf (SW) shows that the performance by such a system should be exactly the same as a conventional coder. Despite the solid theoretical foundations, current DVC qualitative and quantitative performance falls short of existing conventional coders and there remain crucial limitations. A key constraint governing DVC performance is the quality of side information (SI), a coarse representation of original video frames which are not available at the decoder. Techniques to generate SI have usually been based on linear motion compensated temporal interpolation (LMCTI), though these do not always produce satisfactory SI quality, especially in sequences exhibiting non-linear motion.
This thesis presents an intelligent higher order piecewise trajectory temporal interpolation (HOPTTI) framework for SI generation with original contributions that afford better SI quality in comparison to existing LMCTI-based approaches. The major elements in this framework are: (i) a cubic trajectory interpolation algorithm model that significantly improves the accuracy of motion vector estimations; (ii) an adaptive overlapped block motion compensation (AOBMC) model which reduces both blocking and overlapping artefacts in the SI emanating from the block matching algorithm; (iii) the development of an empirical mode switching algorithm; and (iv) an intelligent switching mechanism to construct SI by automatically selecting the best macroblock from the intermediate SI generated by HOPTTI and AOBMC algorithms. Rigorous analysis and evaluation confirms that significant quantitative and perceptual improvements in SI quality are achieved with the new framework
REGION-BASED ADAPTIVE DISTRIBUTED VIDEO CODING CODEC
The recently developed Distributed Video Coding (DVC) is typically suitable for the
applications where the conventional video coding is not feasible because of its
inherent high-complexity encoding. Examples include video surveillance usmg
wireless/wired video sensor network and applications using mobile cameras etc. With
DVC, the complexity is shifted from the encoder to the decoder.
The practical application of DVC is referred to as Wyner-Ziv video coding (WZ)
where an estimate of the original frame called "side information" is generated using
motion compensation at the decoder. The compression is achieved by sending only
that extra information that is needed to correct this estimation. An error-correcting
code is used with the assumption that the estimate is a noisy version of the original
frame and the rate needed is certain amount of the parity bits. The side information is
assumed to have become available at the decoder through a virtual channel. Due to
the limitation of compensation method, the predicted frame, or the side information, is
expected to have varying degrees of success. These limitations stem from locationspecific
non-stationary estimation noise. In order to avoid these, the conventional
video coders, like MPEG, make use of frame partitioning to allocate optimum coder
for each partition and hence achieve better rate-distortion performance. The same,
however, has not been used in DVC as it increases the encoder complexity.
This work proposes partitioning the considered frame into many coding units
(region) where each unit is encoded differently. This partitioning is, however, done at
the decoder while generating the side-information and the region map is sent over to
encoder at very little rate penalty. The partitioning allows allocation of appropriate
DVC coding parameters (virtual channel, rate, and quantizer) to each region. The
resulting regions map is compressed by employing quadtree algorithm and
communicated to the encoder via the feedback channel. The rate control in DVC is
performed by channel coding techniques (turbo codes, LDPC, etc.). The performance
of the channel code depends heavily on the accuracy of virtual channel model that models estimation error for each region. In this work, a turbo code has been used and
an adaptive WZ DVC is designed both in transform domain and in pixel domain. The
transform domain WZ video coding (TDWZ) has distinct superior performance as
compared to the normal Pixel Domain Wyner-Ziv (PDWZ), since it exploits the
'
spatial redundancy during the encoding. The performance evaluations show that the
proposed system is superior to the existing distributed video coding solutions.
Although the, proposed system requires extra bits representing the "regions map" to be
transmitted, fuut still the rate gain is noticeable and it outperforms the state-of-the-art
frame based DVC by 0.6-1.9 dB.
The feedback channel (FC) has the role to adapt the bit rate to the changing
'
statistics between the side infonmation and the frame to be encoded. In the
unidirectional scenario, the encoder must perform the rate control. To correctly
estimate the rate, the encoder must calculate typical side information. However, the
rate cannot be exactly calculated at the encoder, instead it can only be estimated. This
work also prbposes a feedback-free region-based adaptive DVC solution in pixel
domain based on machine learning approach to estimate the side information.
Although the performance evaluations show rate-penalty but it is acceptable
considering the simplicity of the proposed algorithm.
vii
3D Wavelet Transformation for Visual Data Coding With Spatio and Temporal Scalability as Quality Artifacts: Current State Of The Art
Several techniques based on the three–dimensional (3-D) discrete cosine transform (DCT) have been proposed for visual data coding. These techniques fail to provide coding coupled with quality and resolution scalability, which is a significant drawback for contextual domains, such decease diagnosis, satellite image analysis. This paper gives an overview of several state-of-the-art 3-D wavelet coders that do meet these requirements and mainly investigates various types of compression techniques those exists, and putting it all together for a conclusion on further research scope