A SDN-based WiFi-VLC Coupled System for Optimised Service Provision in 5G Networks

Abstract— Visible Light Communication (VLC) is a powerful supplement, which has gained tremendous attention recently and has become a favorable technology in short-range communication scenarios for the Fifth Generation (5G) networks. VLC possesses a number of prominent features to address the highly demanding 5G system requirements for high capacity, high data rate, high spectral efficiency, high energy efficiency, low battery consumption, and low latency. However, this prominent performance is limited by the imperfect reception, since line of sight channel condition may not always exist in practice. This paper presents and experimentally validates a SDN-based VLC system, which is coupled with WiFi access technology in order to improve the network QoS, reassuring zero packet loss reception quality when the user is moving between two consecutive VLC transmitters

Design and implementation of an uplink connection for a light-based IoT node

Abstract. In the wake of soaring demand for shrinking radio frequency (RF) spectrum, light-fidelity (LiFi) has been heralded as a solution to accommodate resources for future communication networks. Infrared (IR) and visible light communication (VLC) are meant to be used within LiFi because of numerous advantages. By combining the paradigm of internet of things (IoT) along with LiFi, light-based IoT (LIoT) emerges as a potential enabler of future 6G networks. With tremendous number of interconnected devices, LIoT nodes need to be able to receive and transmit data while being energy autonomous. One of the most promising clean energy sources comes from both natural and artificial light. In addition to providing illumination and energy, light can also be utilized as a robust information carrier. In order to provide bidirectional connectivity to LIoT node, both downlink and uplink have to be taken into consideration. Whereas downlink relies on visible light as a carrier, uplink approach can be engineered freely within specific requirements. With this in mind, this master’s thesis explores possible solutions for providing uplink connectivity. After analysis of possible solutions, the LIoT proof-of-concept was designed, implemented and validated. By incorporating printed solar cell, dedicated energy harvesting unit, power-optimised microcontroller unit (MCU) and light intensity sensor the LIoT node is able to autonomously transmit data using IR

Infrastructure sharing of 5G mobile core networks on an SDN/NFV platform

When looking towards the deployment of 5G network architectures, mobile network operators will continue to face many challenges. The number of customers is approaching maximum market penetration, the number of devices per customer is increasing, and the number of non-human operated devices estimated to approach towards the tens of billions, network operators have a formidable task ahead of them. The proliferation of cloud computing techniques has created a multitude of applications for network services deployments, and at the forefront is the adoption of Software-Defined Networking (SDN) and Network Functions Virtualisation (NFV). Mobile network operators (MNO) have the opportunity to leverage these technologies so that they can enable the delivery of traditional networking functionality in cloud environments. The benefit of this is reductions seen in the capital and operational expenditures of network infrastructure. When going for NFV, how a Virtualised Network Function (VNF) is designed, implemented, and placed over physical infrastructure can play a vital role on the performance metrics achieved by the network function. Not paying careful attention to this aspect could lead to the drastically reduced performance of network functions thus defeating the purpose of going for virtualisation solutions. The success of mobile network operators in the 5G arena will depend heavily on their ability to shift from their old operational models and embrace new technologies, design principles and innovation in both the business and technical aspects of the environment. The primary goal of this thesis is to design, implement and evaluate the viability of data centre and cloud network infrastructure sharing use case. More specifically, the core question addressed by this thesis is how virtualisation of network functions in a shared infrastructure environment can be achieved without adverse performance degradation. 5G should be operational with high penetration beyond the year 2020 with data traffic rates increasing exponentially and the number of connected devices expected to surpass tens of billions. Requirements for 5G mobile networks include higher flexibility, scalability, cost effectiveness and energy efficiency. Towards these goals, Software Defined Networking (SDN) and Network Functions Virtualisation have been adopted in recent proposals for future mobile networks architectures because they are considered critical technologies for 5G. A Shared Infrastructure Management Framework was designed and implemented for this purpose. This framework was further enhanced for performance optimisation of network functions and underlying physical infrastructure. The objective achieved was the identification of requirements for the design and development of an experimental testbed for future 5G mobile networks. This testbed deploys high performance virtualised network functions (VNFs) while catering for the infrastructure sharing use case of multiple network operators. The management and orchestration of the VNFs allow for automation, scalability, fault recovery, and security to be evaluated. The testbed developed is readily re-creatable and based on open-source software

Integration of hybrid networks, AI, Ultra Massive-MIMO, THz frequency, and FBMC modulation toward 6g requirements : A Review

The fifth-generation (5G) wireless communications have been deployed in many countries with the following features: wireless networks at 20 Gbps as peak data rate, a latency of 1-ms, reliability of 99.999%, maximum mobility of 500 km/h, a bandwidth of 1-GHz, and a capacity of 106 up to Mbps/m2. Nonetheless, the rapid growth of applications, such as extended/virtual reality (XR/VR), online gaming, telemedicine, cloud computing, smart cities, the Internet of Everything (IoE), and others, demand lower latency, higher data rates, ubiquitous coverage, and better reliability. These higher requirements are the main problems that have challenged 5G while concurrently encouraging researchers and practitioners to introduce viable solutions. In this review paper, the sixth-generation (6G) technology could solve the 5G limitations, achieve higher requirements, and support future applications. The integration of multiple access techniques, terahertz (THz), visible light communications (VLC), ultra-massive multiple-input multiple-output ( μm -MIMO), hybrid networks, cell-free massive MIMO, and artificial intelligence (AI)/machine learning (ML) have been proposed for 6G. The main contributions of this paper are a comprehensive review of the 6G vision, KPIs (key performance indicators), and advanced potential technologies proposed with operation principles. Besides, this paper reviewed multiple access and modulation techniques, concentrating on Filter-Bank Multicarrier (FBMC) as a potential technology for 6G. This paper ends by discussing potential applications with challenges and lessons identified from prior studies to pave the path for future research

New Waves of IoT Technologies Research – Transcending Intelligence and Senses at the Edge to Create Multi Experience Environments

The next wave of Internet of Things (IoT) and Industrial Internet of Things (IIoT) brings new technological developments that incorporate radical advances in Artificial Intelligence (AI), edge computing processing, new sensing capabilities, more security protection and autonomous functions accelerating progress towards the ability for IoT systems to self-develop, self-maintain and self-optimise. The emergence of hyper autonomous IoT applications with enhanced sensing, distributed intelligence, edge processing and connectivity, combined with human augmentation, has the potential to power the transformation and optimisation of industrial sectors and to change the innovation landscape. This chapter is reviewing the most recent advances in the next wave of the IoT by looking not only at the technology enabling the IoT but also at the platforms and smart data aspects that will bring intelligence, sustainability, dependability, autonomy, and will support human-centric solutions.acceptedVersio

Models and Methods for Network Selection and Balancing in Heterogeneous Scenarios

The outbreak of 5G technologies for wireless communications can be considered a response to the need for widespread coverage, in terms of connectivity and bandwidth, to guarantee broadband services, such as streaming or on-demand programs offered by the main television networks or new generation services based on augmented and virtual reality (AR / VR). The purpose of the study conducted for this thesis aims to solve two of the main problems that will occur with the outbreak of 5G, that is, the search for the best possible connectivity, in order to offer users the resources necessary to take advantage of the new generation services, and multicast as required by the eMBMS. The aim of the thesis is the search for innovative algorithms that will allow to obtain the best connectivity to offer users the resources necessary to use the 5G services in a heterogeneous scenario. Study UF that allows you to improve the search for the best candidate network and to achieve a balance that allows you to avoid congestion of the chosen networks. To achieve these two important focuses, I conducted a study on the main mathematical methods that made it possible to select the network based on QoS parameters based on the type of traffic made by users. A further goal was to improve the computational computation performance they present. Furthermore, I carried out a study in order to obtain an innovative algorithm that would allow the management of multicast. The algorithm that has been implemented responds to the needs present in the eMBMS, in realistic scenarios

MediaSync: Handbook on Multimedia Synchronization

This book provides an approachable overview of the most recent advances in the fascinating field of media synchronization (mediasync), gathering contributions from the most representative and influential experts. Understanding the challenges of this field in the current multi-sensory, multi-device, and multi-protocol world is not an easy task. The book revisits the foundations of mediasync, including theoretical frameworks and models, highlights ongoing research efforts, like hybrid broadband broadcast (HBB) delivery and users' perception modeling (i.e., Quality of Experience or QoE), and paves the way for the future (e.g., towards the deployment of multi-sensory and ultra-realistic experiences). Although many advances around mediasync have been devised and deployed, this area of research is getting renewed attention to overcome remaining challenges in the next-generation (heterogeneous and ubiquitous) media ecosystem. Given the significant advances in this research area, its current relevance and the multiple disciplines it involves, the availability of a reference book on mediasync becomes necessary. This book fills the gap in this context. In particular, it addresses key aspects and reviews the most relevant contributions within the mediasync research space, from different perspectives. Mediasync: Handbook on Multimedia Synchronization is the perfect companion for scholars and practitioners that want to acquire strong knowledge about this research area, and also approach the challenges behind ensuring the best mediated experiences, by providing the adequate synchronization between the media elements that constitute these experiences

Shortest Route at Dynamic Location with Node Combination-Dijkstra Algorithm

Abstract— Online transportation has become a basic requirement of the general public in support of all activities to go to work, school or vacation to the sights. Public transportation services compete to provide the best service so that consumers feel comfortable using the services offered, so that all activities are noticed, one of them is the search for the shortest route in picking the buyer or delivering to the destination. Node Combination method can minimize memory usage and this methode is more optimal when compared to A* and Ant Colony in the shortest route search like Dijkstra algorithm, but can’t store the history node that has been passed. Therefore, using node combination algorithm is very good in searching the shortest distance is not the shortest route. This paper is structured to modify the node combination algorithm to solve the problem of finding the shortest route at the dynamic location obtained from the transport fleet by displaying the nodes that have the shortest distance and will be implemented in the geographic information system in the form of map to facilitate the use of the system. Keywords— Shortest Path, Algorithm Dijkstra, Node Combination, Dynamic Location (key words