118 research outputs found
An hybridization of global-local methods for autonomous mobile robot navigation in partially-known environments
This paper deals with the navigation problem of an autonomous non-holonomic mobile robot in partially-known environment. In this proposed method, the entire process of navigation is divided into two phases: an off-line phase on which a distance-optimal reference trajectory enables the mobile robot to move from an initial position to a desired target which is planned using the B-spline method and the Dijkstra algorithm. In the online phase of the navigation process, the mobile robot follows the planned trajectory using a sliding mode controller with the ability of avoiding unexpected obstacles by the use of fuzzy logic controller. Also, the fuzzy logic and fuzzy wall-following controllers are used to accomplish the reactive navigation mission (path tracking and obstacle avoidance) for a comparative purpose. Simulation results prove that the proposed path planning method (B-spline) is simple and effective. Also, they attest that the sliding mode controller track more precisely the reference trajectory than the fuzzy logic controller (in terms of time elapsed to reach the target and stability of two wheels velocity) and this last gives best results than the wall-following controller in the avoidance of unexpected obstacles. Thus, the effectiveness of our proposed approach (B-spline method combined with sliding mode and fuzzy logic controllers) is proved compared to other techniques
PassivelyQ-switched flashlamp pumped Nd:YAG laser using liquid graphene oxide as saturable absorber
The performance of passively Q-switched Nd:YAG laser operating at 1060 nm is demonstrated using liquid graphene oxide (GO) composite solution as saturable absorber for the first time. The Q-switched Nd:YAG laser is pumped by a xenon flashlamp. The GO was prepared using the simplified Hummer's method and then mixed with polyethylene oxide to form a composite solution. The Q-switched pulsed laser operates at wavelength of 1064.5 nm with a threshold pump energy of 33.64 J. The maximum output Q-switched laser energy of 41.6 mJ achieved at the maximum pump energy of 81 J. The corresponding pulse width is 98.67 ns
Navigation of Automatic Vehicle using AI Techniques
In the field of mobile robot navigation have been studied as important task for the new generation of mobile robot i.e. Corobot. For this mobile robot navigation has been viewed for unknown environment. We consider the 4-wheeled vehicle (Corobot) for Path Planning, an autonomous robot and an obstacle and collision avoidance to be used in sensor based robot. We propose that the predefined distance from the robot to target and make the robot follow the target at this distance and improve the trajectory tracking characteristics. The robot will then navigate among these obstacles without hitting them and reach the specified goal point. For these goal achieving we use different techniques radial basis function and back-propagation algorithm under the study of neural network. In this Corobot a robotic arm are assembled and the kinematic analyses of Corobot arm and help of Phidget Control Panel a wheeled to be moved in both forward and reverse direction by 2-motor controller have to be done. Under kinematic analysis propose the relationships between the positions and orientation of the links of a manipulator. In these studies an artificial techniques and their control strategy are shown with potential applications in the fields of industry, security, defense, investigation, and others. Here finally, the simulation result using the webot neural network has been done and this result is compared with experimental data for different training pattern
A COLLISION AVOIDANCE SYSTEM FOR AUTONOMOUS UNDERWATER VEHICLES
The work in this thesis is concerned with the development of a novel and practical collision
avoidance system for autonomous underwater vehicles (AUVs). Synergistically,
advanced stochastic motion planning methods, dynamics quantisation approaches,
multivariable tracking controller designs, sonar data processing and workspace representation,
are combined to enhance significantly the survivability of modern AUVs.
The recent proliferation of autonomous AUV deployments for various missions such
as seafloor surveying, scientific data gathering and mine hunting has demanded a substantial
increase in vehicle autonomy. One matching requirement of such missions is
to allow all the AUV to navigate safely in a dynamic and unstructured environment.
Therefore, it is vital that a robust and effective collision avoidance system should be
forthcoming in order to preserve the structural integrity of the vehicle whilst simultaneously
increasing its autonomy.
This thesis not only provides a holistic framework but also an arsenal of computational
techniques in the design of a collision avoidance system for AUVs. The
design of an obstacle avoidance system is first addressed. The core paradigm is the
application of the Rapidly-exploring Random Tree (RRT) algorithm and the newly
developed version for use as a motion planning tool. Later, this technique is merged
with the Manoeuvre Automaton (MA) representation to address the inherent disadvantages
of the RRT. A novel multi-node version which can also address time varying
final state is suggested. Clearly, the reference trajectory generated by the aforementioned
embedded planner must be tracked. Hence, the feasibility of employing the
linear quadratic regulator (LQG) and the nonlinear kinematic based state-dependent
Ricatti equation (SDRE) controller as trajectory trackers are explored.
The obstacle detection module, which comprises of sonar processing and workspace
representation submodules, is developed and tested on actual sonar data acquired
in a sea-trial via a prototype forward looking sonar (AT500). The sonar processing
techniques applied are fundamentally derived from the image processing perspective.
Likewise, a novel occupancy grid using nonlinear function is proposed for the
workspace representation of the AUV. Results are presented that demonstrate the
ability of an AUV to navigate a complex environment.
To the author's knowledge, it is the first time the above newly developed methodologies
have been applied to an A UV collision avoidance system, and, therefore, it is
considered that the work constitutes a contribution of knowledge in this area of work.J&S MARINE LT
- …