Mapping DSP algorithms to a reconfigurable architecture Adaptive Wireless Networking (AWGN)

This report will discuss the Adaptive Wireless Networking project. The vision of the Adaptive Wireless Networking project will be given. The strategy of the project will be the implementation of multiple communication systems in dynamically reconfigurable heterogeneous hardware. An overview of a wireless LAN communication system, namely HiperLAN/2, and a Bluetooth communication system will be given. Possible implementations of these systems in a dynamically reconfigurable architecture are discussed. Suggestions for future activities in the Adaptive Wireless Networking project are also given

P4CEP: Towards In-Network Complex Event Processing

In-network computing using programmable networking hardware is a strong trend in networking that promises to reduce latency and consumption of server resources through offloading to network elements (programmable switches and smart NICs). In particular, the data plane programming language P4 together with powerful P4 networking hardware has spawned projects offloading services into the network, e.g., consensus services or caching services. In this paper, we present a novel case for in-network computing, namely, Complex Event Processing (CEP). CEP processes streams of basic events, e.g., stemming from networked sensors, into meaningful complex events. Traditionally, CEP processing has been performed on servers or overlay networks. However, we argue in this paper that CEP is a good candidate for in-network computing along the communication path avoiding detouring streams to distant servers to minimize communication latency while also exploiting processing capabilities of novel networking hardware. We show that it is feasible to express CEP operations in P4 and also present a tool to compile CEP operations, formulated in our P4CEP rule specification language, to P4 code. Moreover, we identify challenges and problems that we have encountered to show future research directions for implementing full-fledged in-network CEP systems.Comment: 6 pages. Author's versio

A formal semantics for control and data flow in the gannet service-based system-on-chip architecture

There is a growing demand for solutions which allow the design of large and complex reconfigurable Systems-on- Chip (SoC) at high abstraction levels. The Gannet project proposes a functional programming approach for high-abstraction design of very large SoCs. Gannet is a distributed service-based SoC architecture, i.e. a network of services offered by hardware or software cores. The Gannet SoC is task-level reconfigurable: it performs tasks by executing functional task description programs using a demand-driven dataflow mechanism. The Gannet architecture combines the flexible connectivity offered by a Networkon- Chip with the functional language paradigm to create a fully concurrent distributed SoC with the option to completely separate data flows from control flows. This feature is essential to avoid a bottleneck at he controller for run-time control of multiple high-throughput data flows. In this paper we present the Gannet architecture and language and introduce an operational semantics to formally describe the mechanism to separate control and data flows

High-speed, in-band performance measurement instrumentation for next generation IP networks

Facilitating always-on instrumentation of Internet traffic for the purposes of performance measurement is crucial in order to enable accountability of resource usage and automated network control, management and optimisation. This has proven infeasible to date due to the lack of native measurement mechanisms that can form an integral part of the network‟s main forwarding operation. However, Internet Protocol version 6 (IPv6) specification enables the efficient encoding and processing of optional per-packet information as a native part of the network layer, and this constitutes a strong reason for IPv6 to be adopted as the ubiquitous next generation Internet transport. In this paper we present a very high-speed hardware implementation of in-line measurement, a truly native traffic instrumentation mechanism for the next generation Internet, which facilitates performance measurement of the actual data-carrying traffic at small timescales between two points in the network. This system is designed to operate as part of the routers' fast path and to incur an absolutely minimal impact on the network operation even while instrumenting traffic between the edges of very high capacity links. Our results show that the implementation can be easily accommodated by current FPGA technology, and real Internet traffic traces verify that the overhead incurred by instrumenting every packet over a 10 Gb/s operational backbone link carrying a typical workload is indeed negligible

An Energy-Efficient Reconfigurable Circuit Switched Network-on-Chip

Network-on-Chip (NoC) is an energy-efficient on-chip communication architecture for multi-tile System-on-Chip (SoC) architectures. The SoC architecture, including its run-time software, can replace inflexible ASICs for future ambient systems. These ambient systems have to be flexible as well as energy-efficient. To find an energy-efficient solution for the communication network we analyze three wireless applications. Based on their communication requirements we observe that revisiting of the circuit switching techniques is beneficial. In this paper we propose a new energy-efficient reconfigurable circuit-switched Network-on-Chip. By physically separating the concurrent data streams we reduce the overall energy consumption. The circuit-switched router has been synthesized and analyzed for its power consumption in 0.13 ¿m technology. A 5-port circuit-switched router has an area of 0.05 mm2 and runs at 1075 MHz. The proposed architecture consumes 3.5 times less energy compared to its packet-switched equivalen

Optically reconfigurable 1 x 4 remote node switch for access networks

In this paper we demonstrate an optically controlled 1 x 4 remote node switch, based on membrane InP switches bonded to a silicon-on-insulator circuit. We show that the switch exhibits cross talk better than 25 dB between the output ports, and that the switch operates without receiver sensitivity penalty. Furthermore, the proposed switch architecture allows for optical clock distribution as a means to avoid the need for clock recovery at the receiver side. This is demonstrated in a proof-of-principle experiment where data and clock are sent through a single membrane InP switch

Cognitive Radio for Emergency Networks

In the scope of the Adaptive Ad-hoc Freeband (AAF) project, an emergency network built on top of Cognitive Radio is proposed to alleviate the spectrum shortage problem which is the major limitation for emergency networks. Cognitive Radio has been proposed as a promising technology to solve todayâ?~B??~D?s spectrum scarcity problem by allowing a secondary user in the non-used parts of the spectrum that aactully are assigned to primary services. Cognitive Radio has to work in different frequency bands and various wireless channels and supports multimedia services. A heterogenous reconfigurable System-on-Chip (SoC) architecture is proposed to enable the evolution from the traditional software defined radio to Cognitive Radio

A Proposal for Dynamic Access Lists for TCP/IP Packet Filering

The use of IP filtering to improve system security is well established, and although limited in what it can achieve has proved to be efficient and effective. In the design of a security policy there is always a trade-off between usability and security. Restricting access means that legitimate use of the network is prevented; allowing access means illegitimate use may be allowed. Static access list make finding a balance particularly stark -- we pay the price of decreased security 100% of the time even if the benefit of increased usability is only gained 1% of the time. Dynamic access lists would allow the rules to change for short periods of time, and to allow local changes by non-experts. The network administrator can set basic security guide-lines which allow certain basic services only. All other services are restricted, but users are able to request temporary exceptions in order to allow additional access to the network. These exceptions are granted depending on the privileges of the user. This paper covers the following topics: (1) basic introduction to TCP/IP filtering; (2) semantics for dynamic access lists and; (3) a proposed protocol for allowing dynamic access; and (4) a method for representing access lists so that dynamic update and look-up can be done efficiently performed.Comment: 12 pages. Shortened version appeared in SAICSIT 200

Filtering and control for unreliable communication: The discrete-time case

Copyright © 2014 Guoliang Wei et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.In the past decades, communication networks have been extensively employed in many practical control systems, such as manufacturing plants, aircraft, and spacecraft to transmit information and control signals between the system components. When a control loop is closed via a serial communication channel, a networked control system (NCS) is formed. NCSs have become very popular for their great advantages over traditional systems (e.g., low cost, reduced weight, and power requirements, etc.). Generally, it has been implicitly assumed that the communication between the system components is perfect; that is, the signals transmitted from the plant always arrive at the filter or controller without any information loss. Unfortunately, such an assumption is not always true. For example, a common feature of the NCSs is the presence of significant network-induced delays and data losses across the networks. Therefore, an emerging research topic that has recently drawn much attention is how to cope with the effect of network-induced phenomena due to the unreliability of the network communication. This special issue aims at bringing together the latest approaches to understand, filter, and control for discrete-time systems under unreliable communication. Potential topics include but are not limited to (a) multiobjective filtering or control, (b) network-induced phenomena, (c) stability analysis, (d) robustness and fragility, and (e) applications in real-world discrete-time systems