109 research outputs found
Recommended from our members
Performance analysis of error recovery and congestion control in high-speed networks
In the past few years, Broadband Integrated Services Digital Network (B-ISDN) has received increasing attention as a communication architecture capable of supporting multimedia applications. Among the techniques proposed to implement B-ISDN, Asynchronous Transfer Mode (ATM) is considered to be the most promising transfer technique because of its efficiency and flexibility.In ATM networks, the performance bottleneck of the network, which was once the channel transmission speed, is shifted to the processing speed at the network switching nodes and the propagation delay of the channel. This shift is because the high-speed channel increases the ratio of processing time to packet transmission time and also the ratio of propagation delay to packet transmission time. The increased processing overhead makes it difficult to implement hop-by-hop schemes, which may impose prohibitably high processing at each switching node. The increased propagation delay overhead makes traffic control in ATM a challenge since a large number of packets can be in transit between two ATM switching nodes. Because of these fundamental changes, control schemes developed for traditional networks may not perform efficiently, and thus, new network architectures (congestion control schemes, error control schemes, etc.) are required in ATM networks.In this dissertation, we first present an extensive survey of various traffic control schemes and network protocols for ATM networks. In this survey, possible traffic control schemes are examined, and problems of those schemes and their possible solutions are presented. Next, we investigate two key research issues in ATM networks (and other types of high-speed networks): the effects of protocol-processing overhead and the efficiency of traffic control schemes.We first investigate the effects of protocol-processing overhead on the performance of error recovery schemes. Specifically, we investigate the performance trade-offs between link-by-link and edge-to-edge error recovery schemes. Our results show that for a network with high-speed/low-error-rate channels, an edge-to-edge scheme gives a smaller delay than a link-by-link scheme. We then investigate the effectiveness of a priority packet discarding scheme, a congestion control mechanism suitable for high-speed networks. We derive loss probabilities for each stream and investigate the impact of burstiness of traffic streams on the performance of individual streams
Some aspects of traffic control and performance evaluation of ATM networks
The emerging high-speed Asynchronous Transfer Mode (ATM) networks are expected to integrate through statistical multiplexing large numbers of traffic sources having a broad range of statistical characteristics and different Quality of Service (QOS) requirements. To achieve high utilisation of network resources while maintaining the QOS, efficient traffic management strategies have to be developed. This thesis considers the problem of traffic control for ATM networks. The thesis studies the application of neural networks to various ATM traffic control issues such as feedback congestion control, traffic characterization, bandwidth estimation, and Call Admission Control (CAC). A novel adaptive congestion control approach based on a neural network that uses reinforcement learning is developed. It is shown that the neural controller is very effective in providing general QOS control. A Finite Impulse Response (FIR) neural network is proposed to adaptively predict the traffic arrival process by learning the relationship between the past and future traffic variations. On the basis of this prediction, a feedback flow control scheme at input access nodes of the network is presented. Simulation results demonstrate significant performance improvement over conventional control mechanisms. In addition, an accurate yet computationally efficient approach to effective bandwidth estimation for multiplexed connections is investigated. In this method, a feed forward neural network is employed to model the nonlinear relationship between the effective bandwidth and the traffic situations and a QOS measure. Applications of this approach to admission control, bandwidth allocation and dynamic routing are also discussed. A detailed investigation has indicated that CAC schemes based on effective bandwidth approximation can be very conservative and prevent optimal use of network resources. A modified effective bandwidth CAC approach is therefore proposed to overcome the drawback of conventional methods. Considering statistical multiplexing between traffic sources, we directly calculate the effective bandwidth of the aggregate traffic which is modelled by a two-state Markov modulated Poisson process via matching four important statistics. We use the theory of large deviations to provide a unified description of effective bandwidths for various traffic sources and the associated ATM multiplexer queueing performance approximations, illustrating their strengths and limitations. In addition, a more accurate estimation method for ATM QOS parameters based on the Bahadur-Rao theorem is proposed, which is a refinement of the original effective bandwidth approximation and can lead to higher link utilisation
Recommended from our members
Performance analysis of an ATM network with multimedia traffic: a simulation study
Traffic and congestion control are important in enabling ATM networks to maintain the Quality of Service (QoS) required by end users. A Call Admission Control (CAC) strategy ensures that the network has sufficient resources available at the start of each call, but this does not prevent a traffic source from violating the negotiated contract. A policing strategy (User Parameter Control (UPC)) is also required to enforce the negotiated rates for a particular connection and to protect conforming users from network overload.
The aim of this work is to investigate traffic policing and bandwidth management at the User to Network Interface (UNI). A policing function is proposed which is based on the leaky bucket (LB) which offers improved performance for both real time (RT) traffic such as speech and video and non-real time (non-RT) traffic, mainly data by taking into account the QoS requirements. A video cell in violation of the negotiated bit rate causes the remainder of the slice to be discarded. This 'tail clipping' provides protection for the decoder from damaged video slices. Speech cells are coded using a frequency domain coder, which places the most significant bits of a double speech sample into a high priority cell and the least significant bits into a high priority cell. In the case of congestion, the low priority cell can be discarded with little impact on the intelligibility of the received speech. However, data cells require loss-free delivery and are buffered rather than being discarded or tagged for subsequent deletion. This triple strategy is termed the super leaky bucket (SLB).
Separate queues for RT and non-RT traffic, are also proposed at the multiplexer, with non pre-emptive priority service for RT traffic if the queue exceeds a predetermined threshold. If the RT queue continues to grow beyond a second threshold, then all low priority cells (mainly speech) are discarded. This scheme protects non-RT traffic from being tagged and subsequently discarded, by queueing the cells and also by throttling back non-RT sources during periods of congestion. It also prevents the RT cells from being delayed excessively in the multiplexer queue.
A simulation model has been designed and implemented to test the proposal. Realistic sources have been incorporated into the model to simulate the types of traffic which could be expected on an ATM network.
The results show that the S-LB outperforms the standard LB for video cells. The number of cells discarded and the resulting number of damaged video slices are significantly reduced. Dual queues with cyclic service at the multiplexer also reduce the delays experienced by RT cells. The QoS for all categories of traffic is preserved
Application of Asynchronous Transfer Mode (Atm) technology to Picture Archiving and Communication Systems (Pacs): A survey
Broadband Integrated Services Digital Network (R-ISDN) provides a range of narrowband and broad-band services for voice, video, and multimedia. Asynchronous Transfer Mode (ATM) has been selected by the standards bodies as the transfer mode for implementing B-ISDN; The ability to digitize images has lead to the prospect of reducing the physical space requirements, material costs, and manual labor of traditional film handling tasks in hospitals. The system which handles the acquisition, storage, and transmission of medical images is called a Picture Archiving and Communication System (PACS). The transmission system will directly impact the speed of image transfer. Today the most common transmission means used by acquisition and display station products is Ethernet. However, when considering network media, it is important to consider what the long term needs will be. Although ATM is a new standard, it is showing signs of becoming the next logical step to meet the needs of high speed networks; This thesis is a survey on ATM, and PACS. All the concepts involved in developing a PACS are presented in an orderly manner. It presents the recent developments in ATM, its applicability to PACS and the issues to be resolved for realising an ATM-based complete PACS. This work will be useful in providing the latest information, for any future research on ATM-based networks, and PACS
Dynamic bandwidth allocation in ATM networks
Includes bibliographical references.This thesis investigates bandwidth allocation methodologies to transport new emerging bursty traffic types in ATM networks. However, existing ATM traffic management solutions are not readily able to handle the inevitable problem of congestion as result of the bursty traffic from the new emerging services. This research basically addresses bandwidth allocation issues for bursty traffic by proposing and exploring the concept of dynamic bandwidth allocation and comparing it to the traditional static bandwidth allocation schemes
Resource management for multimedia traffic over ATM broadband satellite networks
PhDAbstract not availabl
On-board B-ISDN fast packet switching architectures. Phase 1: Study
The broadband integrate services digital network (B-ISDN) is an emerging telecommunications technology that will meet most of the telecommunications networking needs in the mid-1990's to early next century. The satellite-based system is well positioned for providing B-ISDN service with its inherent capabilities of point-to-multipoint and broadcast transmission, virtually unlimited connectivity between any two points within a beam coverage, short deployment time of communications facility, flexible and dynamic reallocation of space segment capacity, and distance insensitive cost. On-board processing satellites, particularly in a multiple spot beam environment, will provide enhanced connectivity, better performance, optimized access and transmission link design, and lower user service cost. The following are described: the user and network aspects of broadband services; the current development status in broadband services; various satellite network architectures including system design issues; and various fast packet switch architectures and their detail designs
Statistical multiplexing and connection admission control in ATM networks
Asynchronous Transfer Mode (ATM) technology is widely employed for the transport of network traffic, and has the potential to be the base technology for the next generation of global communications. Connection Admission Control (CAC) is the effective traffic control mechanism which is necessary in ATM networks in order to avoid possible congestion at each network node and to achieve the Quality-of-Service (QoS) requested by each connection. CAC determines whether or not the network should accept a new connection. A new connection will only be accepted if the network has sufficient resources to meet its QoS requirements without affecting the QoS commitments already made by the network for existing connections. The design of a high-performance CAC is based on an in-depth understanding of the statistical characteristics of the traffic sources
A Slotted Ring Test Bed for the Study of ATM Network Congestion Management
This thesis addresses issues raised by the proposed Broadband Integrated Services Digital Network which will provide a flexible combination of integrated services traffic through its cell-based Asynchronbus Transport Mode (ATM). The introduction of a cell-based, connection-oriented, transport mode brings with it new technical challenges for network management. The routing of cells, their service at switching centres, and problems of cell congestion not encountered in the existing network, are some of the key issues.
The thesis describes the development of a hardware slotted ring testbed for the investigation of congestion management in an ATM network. The testbed is designed to incorporate a modified form of the ORWELL protocol to control media access. The media access protocol is analysed to give a model for maximum throughput and reset interval under various traffic distributions. The results from the models are compared with measurements carried out on the testbed, where cell arrival statistics are also varied. It is shown that the maximum throughput of the testbed is dependent on both traffic distribution and cell arrival statistics.
The testbed is used for investigations in a heterogeneous traffic environment where two classes of traffic with different cell arrival statistics and quality of service requirements are defined. The effect of prioritisation, media access protocol, traffic intensity, and traffic source statistics were investigated by determining an Admissible Load Region (ALR) for a network station. Conclusions drawn from this work suggest that there are many problems associated with the reliable definition of an ALR because of the number of variable parameters which could shift the ALR boundary. A suggested direction for further work is to explore bandwidth reservation and the concept of equivalent capacity of a connection, and how this can be linked to source control parameters
- …