3,793 research outputs found
Dynamic simulation of task constrained of a rigid-flexible manipulator
A rigid-flexible manipulator may be assigned tasks in a moving environment
where the winds or vibrations affect the position and/or orientation of surface
of operation. Consequently, losses of the contact and perhaps degradation of
the performance may occur as references are changed. When the environment is
moving, knowledge of the angle α between the contact surface and the
horizontal is required at every instant. In this paper, different profiles for
the time varying angle α are proposed to investigate the effect of this
change into the contact force and the joint torques of a rigid-flexible
manipulator. The coefficients of the equation of the proposed rotating surface
are changing with time to determine the new X and Y coordinates of the moving
surface as the surface rotates
Characterization of robotics parallel algorithms and mapping onto a reconfigurable SIMD machine
The kinematics, dynamics, Jacobian, and their corresponding inverse computations are six essential problems in the control of robot manipulators. Efficient parallel algorithms for these computations are discussed and analyzed. Their characteristics are identified and a scheme on the mapping of these algorithms to a reconfigurable parallel architecture is presented. Based on the characteristics including type of parallelism, degree of parallelism, uniformity of the operations, fundamental operations, data dependencies, and communication requirement, it is shown that most of the algorithms for robotic computations possess highly regular properties and some common structures, especially the linear recursive structure. Moreover, they are well-suited to be implemented on a single-instruction-stream multiple-data-stream (SIMD) computer with reconfigurable interconnection network. The model of a reconfigurable dual network SIMD machine with internal direct feedback is introduced. A systematic procedure internal direct feedback is introduced. A systematic procedure to map these computations to the proposed machine is presented. A new scheduling problem for SIMD machines is investigated and a heuristic algorithm, called neighborhood scheduling, that reorders the processing sequence of subtasks to reduce the communication time is described. Mapping results of a benchmark algorithm are illustrated and discussed
Design, analysis, and control of a cable-driven parallel platform with a pneumatic muscle active support
Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.The neck is an important part of the body that connects the head to the torso, supporting the weight and generating the movement of the head. In this paper, a cable-driven parallel platform with a pneumatic muscle active support (CPPPMS) is presented for imitating human necks, where cable actuators imitate neck muscles and a pneumatic muscle actuator imitates spinal muscles, respectively. Analyzing the stiffness of the mechanism is carried out based on screw theory, and this mechanism is optimized according to the stiffness characteristics. While taking the dynamics of the pneumatic muscle active support into consideration as well as the cable dynamics and the dynamics of the Up-platform, a dynamic modeling approach to the CPPPMS is established. In order to overcome the flexibility and uncertainties amid the dynamic model, a sliding mode controller is investigated for trajectory tracking, and the stability of the control system is verified by a Lyapunov function. Moreover, a PD controller is proposed for a comparative study. The results of the simulation indicate that the sliding mode controller is more effective than the PD controller for the CPPPMS, and the CPPPMS provides feasible performances for operations under the sliding mode control
A hyper-redundant manipulator
“Hyper-redundant” manipulators have a very large number of actuatable degrees of freedom. The benefits of hyper-redundant robots include the ability to avoid obstacles, increased robustness with respect to mechanical failure, and the ability to perform new forms of robot locomotion and grasping. The authors examine hyper-redundant manipulator design criteria and the physical implementation of one particular design: a variable geometry truss
Kinematically optimal hyper-redundant manipulator configurations
“Hyper-redundant” robots have a very large or infinite degree of kinematic redundancy. This paper develops new methods for determining “optimal” hyper-redundant manipulator configurations based on a continuum formulation of kinematics. This formulation uses a backbone curve model to capture the robot's essential macroscopic geometric features. The calculus of variations is used to develop differential equations, whose solution is the optimal backbone curve shape. We show that this approach is computationally efficient on a single processor, and generates solutions in O(1) time for an N degree-of-freedom manipulator when implemented in parallel on O(N) processors. For this reason, it is better suited to hyper-redundant robots than other redundancy resolution methods. Furthermore, this approach is useful for many hyper-redundant mechanical morphologies which are not handled by known methods
Stiffness Analysis Of Multi-Chain Parallel Robotic Systems
The paper presents a new stiffness modelling method for multi-chain parallel
robotic manipulators with flexible links and compliant actuating joints. In
contrast to other works, the method involves a FEA-based link stiffness
evaluation and employs a new solution strategy of the kinetostatic equations,
which allows computing the stiffness matrix for singular postures and to take
into account influence of the external forces. The advantages of the developed
technique are confirmed by application examples, which deal with stiffness
analysis of a parallel manipulator of the Orthoglide famil
- …