3 research outputs found

    Dynamic multiagent method to avoid duplicated information at intersections in VANETs

    Get PDF
    Vehicular ad hoc networks (VANETs) allow vehicles to contact one another to provide safety and comfort applications. However, mobility is a great challenge in VANETs. High vehicle speed causes topological changes that result in unstable networks. Therefore, most previous studies focused on using clustering techniques in roads to reduce the effect of vehicle mobility and enhance network stability. Vehicles stop moving at intersections, and their mobility does not impact clustering. However, none of previous studies discussed the impact of vehicle stopping at intersections on base stations (BSs). Vehicles that have stopped moving at intersections continue to send the same information to BSs, which causes duplicated information. Hence, this study proposes a new method named dynamic multiagent (DMA) to filter cluster information and prevent duplicated information from being sent to BSs at intersections. The performance of the proposed method was evaluated through simulations during the use of DMA and without-DMA (W-DMA) methods based on real data collected from 10 intersections in Batu Pahat City, Johor, Malaysia. Overall, the proposed DMA method results in a considerable reduction in duplicated information at intersections, with an average percentage of 81% from the W-DMA method

    Enhanced stability of cluster-based location service mechanism for urban vehicular ad hoc networks

    Get PDF
    Vehicular Ad Hoc Networks (VANETs) are gaining tremendous research interest in developing an Intelligent Transportation System (ITS) for smart cities. The position of vehicles plays a significant role in ITS applications and services such as public emergency, vehicles tracking, resource discovery, traffic monitoring and position-based routing. The location service is used to keep up-to-date records of current positions of vehicles. A review of previous literatures, found various locationbased service mechanisms have been proposed to manage the position of vehicles. The cluster-based location service mechanisms have achieved growing attention due to their advantages such as scalability, reliability and reduced communication overhead. However, the performance of the cluster-based location service mechanism depends on the stability of the cluster, and the stability of the cluster depends on the stability of the Cluster Head (CH), Cluster Member (CM) and cluster maintenance. In the existing cluster-based location service schemes, the issue of CH instability arises due to the non-optimal cluster formation range and unreliable communication link with Road Side Unit (RSU). The non-optimal cluster formation range causes CH instability due to lack of uniqueness of Centroid Vehicle (CV), uncertainty of participating vehicles in the CH election process and unreliability of the Cluster Head Election Value (CHEV). Also, the unreliable link with RSU does not guarantee that CH is stable with respect to its CMs and RSU simultaneously. The issue of CM instability in the existing cluster-based location service schemes occurs due to using instantaneous speed of the CH and fixed CM affiliation threshold values. The instantaneous speed causes the CM to switch the clusters frequently and fixed CM affiliation threshold values increase isolated vehicles. The frequent switching of isolated vehicles augment the CM instability. Moreover, the inefficient cluster maintenance due to non-optimal cluster merging and cluster splitting also contributes to cluster instability. The merging conditions such as fixed merging threshold time and uncertain movement of overlapping CHs within merging threshold time cause the cluster instability. Furthermore, the unnecessary clustering during cluster splitting around the intersection due to CH election parameters also increases cluster instability. Therefore, to address the aforementioned cluster instability issues, Enhanced Stability of Cluster-based Location Service (ESCLS) mechanism was proposed for urban VANETs. The proposed ESCLS mechanism consists of three complementary schemes which are Reliable Cluster Head Election (RCHE), Dynamic Cumulative Cluster Member Affiliation (DCCMA) and Optimized Cluster Maintenance (OCM). Firstly, the aim of the RCHE scheme was to enhance the stability of the CH through optimizing the cluster formation range and by considering communication link reliability with the RSU. Secondly, the DCCMA scheme focussed on improving the stability of the CMs by considering the Cumulative Moving Average Speed (CMAS) of the CH and dynamic CM affiliation threshold values, and finally, the OCM scheme enhanced the cluster stability by improving cluster merging conditions and reducing unnecessary clustering in cluster splitting. The results of the simulation verified the improved performance of the ESCLS in terms of increasing the location query success rate by 34%, and decreasing the query response delay and localization error by 24% and 35% respectively as compared to the existing cluster-based location service schemes such as HCBLS, CBLS and MoGLS. In conclusion, it is proven that ESCLS is a suitable location service mechanism for a wide range of position-based applications of VANETs that require timely and accurate vehicle locations

    Quality of service aware data dissemination in vehicular Ad Hoc networks

    Full text link
    Des systèmes de transport intelligents (STI) seront éventuellement fournis dans un proche avenir pour la sécurité et le confort des personnes lors de leurs déplacements sur les routes. Les réseaux ad-hoc véhiculaires (VANETs) représentent l'élément clé des STI. Les VANETs sont formés par des véhicules qui communiquent entre eux et avec l'infrastructure. En effet, les véhicules pourront échanger des messages qui comprennent, par exemple, des informations sur la circulation routière, les situations d'urgence et les divertissements. En particulier, les messages d'urgence sont diffusés par des véhicules en cas d'urgence (p.ex. un accident de voiture); afin de permettre aux conducteurs de réagir à temps (p.ex., ralentir), les messages d'urgence doivent être diffusés de manière fiable dans un délai très court. Dans les VANETs, il existe plusieurs facteurs, tels que le canal à pertes, les terminaux cachés, les interférences et la bande passante limitée, qui compliquent énormément la satisfaction des exigences de fiabilité et de délai des messages d'urgence. Dans cette thèse, en guise de première contribution, nous proposons un schéma de diffusion efficace à plusieurs sauts, appelé Dynamic Partitioning Scheme (DPS), pour diffuser les messages d'urgence. DPS calcule les tailles de partitions dynamiques et le calendrier de transmission pour chaque partition; à l'intérieur de la zone arrière de l'expéditeur, les partitions sont calculées de sorte qu'en moyenne chaque partition contient au moins un seul véhicule; l'objectif est de s'assurer que seul un véhicule dans la partition la plus éloignée (de l'expéditeur) est utilisé pour diffuser le message, jusqu'au saut suivant; ceci donne lieu à un délai d'un saut plus court. DPS assure une diffusion rapide des messages d'urgence. En outre, un nouveau mécanisme d'établissement de liaison, qui utilise des tonalités occupées, est proposé pour résoudre le problème du problème de terminal caché. Dans les VANETs, la Multidiffusion, c'est-à-dire la transmission d'un message d'une source à un nombre limité de véhicules connus en tant que destinations, est très importante. Par rapport à la diffusion unique, avec Multidiffusion, la source peut simultanément prendre en charge plusieurs destinations, via une arborescence de multidiffusion, ce qui permet d'économiser de la bande passante et de réduire la congestion du réseau. Cependant, puisque les VANETs ont une topologie dynamique, le maintien de la connectivité de l'arbre de multidiffusion est un problème majeur. Comme deuxième contribution, nous proposons deux approches pour modéliser l'utilisation totale de bande passante d'une arborescence de multidiffusion: (i) la première approche considère le nombre de segments de route impliqués dans l'arbre de multidiffusion et (ii) la seconde approche considère le nombre d'intersections relais dans l'arbre de multidiffusion. Une heuristique est proposée pour chaque approche. Pour assurer la qualité de service de l'arbre de multidiffusion, des procédures efficaces sont proposées pour le suivi des destinations et la surveillance de la qualité de service des segments de route. Comme troisième contribution, nous étudions le problème de la congestion causée par le routage du trafic de données dans les VANETs. Nous proposons (1) une approche de routage basée sur l’infonuagique qui, contrairement aux approches existantes, prend en compte les chemins de routage existants qui relaient déjà les données dans les VANETs. Les nouvelles demandes de routage sont traitées de sorte qu'aucun segment de route ne soit surchargé par plusieurs chemins de routage croisés. Au lieu d'acheminer les données en utilisant des chemins de routage sur un nombre limité de segments de route, notre approche équilibre la charge des données en utilisant des chemins de routage sur l'ensemble des tronçons routiers urbains, dans le but d'empêcher, dans la mesure du possible, les congestions locales dans les VANETs; et (2) une approche basée sur le réseau défini par logiciel (SDN) pour surveiller la connectivité VANET en temps réel et les délais de transmission sur chaque segment de route. Les données de surveillance sont utilisées en entrée de l'approche de routage.Intelligent Transportation Systems (ITS) will be eventually provided in the near future for both safety and comfort of people during their travel on the roads. Vehicular ad-hoc Networks (VANETs), represent the key component of ITS. VANETs consist of vehicles that communicate with each other and with the infrastructure. Indeed, vehicles will be able to exchange messages that include, for example, information about road traffic, emergency situations, and entertainment. Particularly, emergency messages are broadcasted by vehicles in case of an emergency (e.g., car accident); in order to allow drivers to react in time (e.g., slow down), emergency messages must be reliably disseminated with very short delay. In VANETs, there are several factors, such as lossy channel, hidden terminals, interferences and scarce bandwidth, which make satisfying reliability and delay requirements of emergency messages very challenging. In this thesis, as the first contribution, we propose a reliable time-efficient and multi-hop broadcasting scheme, called Dynamic Partitioning Scheme (DPS), to disseminate emergency messages. DPS computes dynamic partition sizes and the transmission schedule for each partition; inside the back area of the sender, the partitions are computed such that in average each partition contains at least a single vehicle; the objective is to ensure that only a vehicle in the farthest partition (from the sender) is used to disseminate the message, to next hop, resulting in shorter one hop delay. DPS ensures fast dissemination of emergency messages. Moreover, a new handshaking mechanism, that uses busy tones, is proposed to solve the problem of hidden terminal problem. In VANETs, Multicasting, i.e. delivering a message from a source to a limited known number of vehicles as destinations, is very important. Compared to Unicasting, with Multicasting, the source can simultaneously support multiple destinations, via a multicast tree, saving bandwidth and reducing overall communication congestion. However, since VANETs have a dynamic topology, maintaining the connectivity of the multicast tree is a major issue. As the second contribution, we propose two approaches to model total bandwidth usage of a multicast tree: (i) the first approach considers the number of road segments involved in the multicast tree and (ii) the second approach considers the number of relaying intersections involved in the multicast tree. A heuristic is proposed for each approach. To ensure QoS of the multicasting tree, efficient procedures are proposed for tracking destinations and monitoring QoS of road segments. As the third contribution, we study the problem of network congestion in routing data traffic in VANETs. We propose (1) a Cloud-based routing approach that, in opposition to existing approaches, takes into account existing routing paths which are already relaying data in VANETs. New routing requests are processed such that no road segment gets overloaded by multiple crossing routing paths. Instead of routing over a limited set of road segments, our approach balances the load of communication paths over the whole urban road segments, with the objective to prevent, whenever possible, local congestions in VANETs; and (2) a Software Defined Networking (SDN) based approach to monitor real-time VANETs connectivity and transmission delays on each road segment. The monitoring data is used as input to the routing approach
    corecore